History of plains resurfacing in the Scandia region of Mars

We present a preliminary photogeologic map of the Scandia region of Mars with the objective of reconstructing its resurfacing history. The Scandia region includes the lower section of the regional lowland slope of Vastitas Borealis extending about 500–1800 km away from Alba Mons into the Scandia sub-basin below ?4800 m elevation. Twenty mapped geologic units express the diverse stratigraphy of the region. We particularly focus on the materials making up the Vastitas Borealis plains and its Scandia sub-region, where erosional processes have obscured stratigraphic relations and made the reconstruction of the resurfacing history particularly challenging. Geologic mapping implicates the deposition, erosion, and deformation/degradation of geologic units predominantly during Late Hesperian and Early Amazonian time (～3.6–3.3 Ga). During this time, Alba Mons was active, outflow channels were debouching sediments into the northern plains, and basal ice layers of the north polar plateau were accumulating. We identify zones of regional tectonic contraction and extension as well as gradation and mantling. Depressions and scarps within these zones indicate collapse and gradation of Scandia outcrops and surfaces at scales of meters to hundreds of meters. We find that Scandia Tholi display concentric ridges, rugged peaks, irregular depressions, and moats that suggest uplift and tilting of layered plains material by diapirs and extrusion, erosion, and deflation of viscous, sedimentary slurries as previously suggested. These appear to be long-lived features that both pre-date and post-date impact craters. Mesa-forming features may have similar origins and occur along the southern margin of the Scandia region, including near the Phoenix Mars Lander site. Distinctive lobate materials associated with local impact craters suggest impact-induced mobilization of surface materials. We suggest that the formation of the Scandia region features potentially resulted from crustal heating related to Alba Mons volcanism, which acted upon a sequence of lavas, outflow channel sediments, and polar ice deposits centered within the Scandia region. These volatile-enriched sediments may have been in a state of partial volatile melt, resulting in the mobilization of deeply buried ancient materials and their ascent and emergence as sediment and mud breccia diapirs to form tholi features. Similar subsurface instabilities proximal to Alba Mons may have led to surface disruption, as suggested by local and regional scarps, mesas, moats, and knob fields.     

Contents of hepatic and renal metallothioneins in Hyposarcus pardalis: for construction of biomarker for heavy metal contamination in environments

The pollution of water by heavy metals is one of the most serious problems in the developing countries, where watercourses play important roles in transport and economic activities. The aim of this study was to examine whether Hyposarcus pardalis, a fish species widespread in the freshwater environment in Indonesia, could be used as a biomarker for environmental pollution by metals. To this effect, the concentrations of metallothioneins and metals in the livers and kidneys of H. pardalis were measured. In addition, to clarify the relationship between metallothionein concentrations and metal exposure, the concentrations of metallothioneins and metals were determined in the liver and the kidney of fish exposed to 50 and 500 ppb Cu and 500 ppb Mn, compared with those kept in clean water. Sufficient concentrations of metallothionein were detected in fish captured from Lake Rawakalong located in an industrial area in the suburbs of Jakarta. The results of exposure experiments suggested that H. pardalis retained a history of pollution in its organs for a long duration, and the metals bound to metallothioneins in the liver and kidney could be replaced with Cu following exposure. In conclusion, the hepatic and renal metallothioneins in H. pardalis are a useful candidate biomarker for monitoring heavy metal contamination.     

A specific Ce oxidation process during sorption of rare earth elements on biogenic Mn oxide produced by Acremonium sp. strain KR21-2

Sorption of rare earth elements (REEs) and Ce oxidation on natural and synthetic Mn oxides have been investigated by many researchers. Although Mn(II)-oxidizing microorganisms are thought to play an important role in the formation of Mn oxides in most natural environments, Ce oxidation by biogenic Mn oxide and the relevance of microorganisms to the Ce oxidation process have not been well understood. Therefore, in this study, we conducted sorption experiments of REEs on biogenic Mn oxide produced by Acremonium sp. strain KR21-2. The distribution coefficients, K_d(REE), between biogenic Mn oxide (plus hyphae) and 10 mmol/L NaCl solution showed a large positive Ce anomaly and convex tetrad effect variations at pH 3.8, which was consistent with previous works using synthetic Mn oxide. The positive Ce anomaly was caused by oxidation of Ce(III) to Ce(IV) by the biogenic Mn oxide, which was confirmed by analysis of the Ce L_III-edge XANES spectra. With increasing pH, the positive Ce anomaly and convex tetrad effects became less pronounced. Furthermore, negative Ce anomalies were observed at a pH of more than 6.5, suggesting that Ce(IV) was stabilized in the solution (<0.2 μm) phase, although Ce(III) oxidation to Ce(IV) on the biogenic Mn oxide was confirmed by XANES analysis. It was demonstrated that no Ce(III) oxidation occurred during sorption on the hyphae of strain KR21-2 by the K_d(REE) patterns and XANES analysis. The analysis of size exclusion HPLC-ICP-MS showed that some fractions of REEs in the filtrates (<0.2 μm) after sorption experiments were bound to organic molecules (40 and <670 kDa fractions), which were possibly released from hyphae. A line of our data indicates that the negative Ce anomalies under circumneutral pH conditions arose from Ce(III) oxidation on the biogenic Mn oxide and subsequent complexation of Ce(IV) with organic ligands. The suppression of tetrad effects is also explained by the complexation of REEs with organic ligands. The results of this study demonstrate that the coexistence of the biogenic Mn oxide and hyphae of strain KR21-2 produces a specific redox chemistry which cannot be explained by inorganic species.     

Evaluation of ADEOS-II GLI ocean color atmospheric correction using SIMBADA handheld radiometer data

The performance of the “version 2” Global Imager (GLI) standard atmospheric correction algorithm, which includes empirical absorptive aerosol correction and sun glint correction, was evaluated using data collected with handheld above-water SIMBADA radiometers during 23 cruises of opportunity (research vessels, merchant ships), mostly in the North Atlantic and European seas. A number of 100 match-up data sets of GLI-derived and SIMBADA-measured normalized water-leaving radiance (nL _W ) and aerosol optical thickness (AOT) were sorted out, using objective selection criteria, and analyzed. The Root-Mean-Square (RMS) difference between GLI and SIMBADA nL _W was about 0.32 μW/cm²/nm/sr for the 412 nm band, showing improvement by 30% in RMS difference with respect to the conventional “version 1” GLI atmospheric correction algorithm, and the mean difference (or bias) was reduced significantly. For AOT, the RMS difference was 0.1 between GLI estimates and SIMBADA measurements and the bias was small (a few 0.01), but the ?ngstr?m exponent was systematically underestimated, by 0.4 on average, suggesting a potential GLI calibration offset in the near infrared. The nL _W differences were not correlated to AOT, although performance was best in very clear conditions (AOT less than 0.05 in the 865 nm band). Despite the relatively large scatter between estimated and measured nL _W , the derived chlorophyll-a concentration estimates, applying the same ratio algorithm (GLI OC4V4) to GLI and SIMBADA, were consistent and highly correlated in the range of 0.05–2 μg/l. The large variability in chlorophyll-a concentration estimate for clear clean water areas (e.g. with the concentration range lower than about 0.05 μg/l) turns out to be due to the nature of the “band ratio” based in-water algorithm.     

A new formulation of the viscosity in planetary rings

We present a new formulation of the viscosity in planetary rings, where particles interact through their gravitational forces and direct collisions. In the previous studies on the viscosity in self-gravitating rings, the viscosity consists of three components, which are defined separately in different ways. The complex definitions make it difficult to evaluate the viscosity in N-body simulation of rings. In our new formulation, the viscosity is expressed in terms of changes in orbital elements of particles due to particle interactions. This makes the expression of the viscosity simple. The new formulation gives a simple way to evaluate the viscosity in N-body simulation. We find that for practical evaluation of the viscosity of planetary rings, only energy dissipation at direct inelastic collisions is needed.For tenuous particle disks (i.e., optically thin disks), we further derive a formula of the viscosity. The formula requires only a numerical coefficient that can be obtained from three-body calculation. Since planetesimal disks are also tenuous, the viscosity in planetesimal disks can be also obtained from this formula. In a subsequent paper, we will evaluate this coefficient through three-body calculation and obtain the viscosity for a wide range of parameters such as the restitution coefficient and the radial location in rings.     

Improving the scientific assessment of carbon sinks

Abstract

The future role of carbon sinks with reference to the Kyoto Protocol depends significantly on developing an international consensus on carbon-sink assessment and carbon accounting. A clear and practical approach is needed that allows both the scientific community and policy-makers to construct a viable operational framework. This article proposes that a new strategy be developed for carbon-sink assessment based on full carbon accounting (FCA) alongside a separate political tool for carbon accounting. This approach is derived from the experience of the European critical loads (CL) concept, which seeks to quantify levels of pollutants (such as sulfur) that can be absorbed by the environment without causing ecological harm. Crucial to the implementation of such a strategy are robust institutional settings, such as an internationally coordinated monitoring system, open and fair access to the assessment processes, and international research cooperation programs for addressing associated problems of carbon-sink activities.     

Length-Scale Similarity of Turbulent Organized Structures over Surfaces with Different Roughness Types

We examine the similarity of turbulent organized structures over smooth and very rough wall flows. Turbulent flow fields in horizontal cross-sections were measured using particle image velocimetry, and the characteristics of turbulent organized structures over four types of surfaces were investigated. Measurements were conducted at several measurement heights across the internal boundary layer. The length and width of turbulence structures were quantified using a two-point correlation method. We selected two thresholds of two-point correlation coefficients to consider both large-scale and small-scale structures; the validity of these choices was examined through the analyses using proper orthogonal decomposition. For large-scale structures, the length and aspect ratios (streamwise length/spanwise width) of structures were highly correlated with the velocity gradient for each measurement height and boundary-layer thickness. This relationship was also examined in the results of previous studies, and the scaling of the aspect ratio with the non-dimensional velocity gradient again showed the importance of the velocity gradient, with slight differences found between smooth and rough surfaces. In contrast, the small-scale structures exhibited weak dependency on the velocity gradient and boundary-layer thickness. Instantaneous snapshots of turbulent organized structures at the same shear level also displayed differences in small-scale structures, but the structures of the organized motions resembled each other, as in the results of the two-point correlation method.     

Production and bacterial decomposition of dissolved organic matter in a fringing coral reef

The concentrations of dissolved organic carbon and nitrogen (DOC and DON, respectively) were measured in Shiraho fringing reef (Japan), using a high-temperature catalytic-oxidation method. When the seawater on the reef flat (shallow lagoon) was isolated from the surrounding ocean due to the low tide, the concentrations of DOC and DON on the reef flat were 66–75 and 4.8–5.7 μmol l⁻¹, respectively. The DOC and DON concentrations were higher than those of the adjacent outer ocean (57–58 and 3.8 μmol l⁻¹, respectively), suggesting that the coral reef functioned as a net source of dissolved organic matter for the surrounding ocean. In order to investigate long-term bacterial decomposition of the reef-derived DOC (RF-DOC), the seawater samples collected on the reef flat and at the adjacent ocean were incubated in the dark for 1 year. Regression analysis using an exponential curve that considered two degradability pools (labile and refractory) fitted the mineralization of the RF-DOC very well (r ² > 0.89). According to the regression analysis, the DOC produced on the reef flat was composed of the labile fraction of 63–94% (average 77%) and the refractory fraction of 6–37% (average 23%). It was concluded that some of the DOC that was produced in the coral reef ecosystem was exported to the surrounding ocean if the reef flat had a water residence time less than several months. The exported organic matter may support microbial communities in the ocean as an energy source.     

Discriminating residual and colluvial soils using topographic analysis in a small,forested catchment in Japan

Soil moisture plays an important role in hydrology. Understanding factors (such as topography, vegetation, and meteorological conditions) that influence spatio‐temporal variability in soil moisture, and how this influence is manifested, is important for understanding hydrological processes. A number of distributed (quasi‐)physical hydrological models have been developed to investigate this subject. Previous studies have shown that the spatial differences in the distribution of soil types (residual and colluvial soils) dominantly reflect spatio‐temporal fluctuations in soil moisture and runoff. We present a methodology for assessing the spatial distribution of residual and colluvial soils, which differ with respect to their physical characteristics, in a 0·88 km² forested catchment with complex topography and a complex land‐use history. Our method is based on penetration resistance profile data; in this data set, each data point represents soil physical characteristics within an area of about 25 m². If the spatial distribution of soils under similar meteorological, geological, historical land use, and other conditions could be characterized on the basis of similarity in topographic features, then the spatial distribution of soil could be predicted based on relationships between various topographic indices (e.g. topographic index and local slope). We tested whether our model correctly assessed the reference data. The model's results were 90·5% correct for residual soils and 87·3% correct for colluvial soils. Further studies will quantify the relationships between topographic features of land covered by residual and colluvial soils and changes in spatio‐temporal variations in the catchment (e.g. vegetation and land use) as a function of geology or meteorology. Copyright © 2007 John Wiley & Sons, Ltd.     

Aeolian dust experiment on climate impact: An overview of Japan–China joint project ADEC

The Aeolian Dust Experiment on Climate Impact (ADEC) was initiated in April 2000 as a joint five-year Japan–China project. The goal was to understand the impact of aeolian dust on climate via radiative forcing (RF). Field experiments and numerical simulations were conducted from the source regions in northwestern China to the downwind region in Japan in order to understand wind erosion processes temporal and spatial distribution of dust during their long-range transportation chemical, physical, and optical properties of dust and the direct effect of radiative forcing due to dust. For this, three intensive observation periods (IOP) were conducted from April 2002 to April 2004.The in situ and network observation results are summarized as follows: (1) In situ observations of the wind erosion process revealed that the vertical profile of moving sand has a clear size dependency with height and saltation flux and that threshold wind velocity is dependent on soil moisture. Results also demonstrated that saltation flux is strongly dependent on the parent soil size distribution of the desert surface. (2) Both lidar observations and model simulations revealed a multiple dust layer in East Asia. A numerical simulation of a chemical transport model, CFORS, illustrated the elevated dust layer from the Taklimakan Desert and the lower dust layer from the Gobi Desert. The global-scale dust model, MASINGAR, also simulated the dust layer in the middle to upper free troposphere in East Asia, which originated from North Africa and the Middle East during a dust storm in March 2003. Raman lidar observations at Tsukuba, Japan, found the ice cloud associated with the dust layer at an altitude of 6 to 9 km. Analysis from lidar and the radio-sonde observation suggested that the Asian dust acted as ice nuclei at the ice-saturated region. These results suggest the importance of dust's climate impact via the indirect effect of radiative forcing due to the activation of dust into ice nuclei. (3) Studies on the aerosol concentration indicated that size distributions of aerosols in downwind regions have bimodal peaks. One peak was in the submicron range and the other in the supermicron range. The main soluble components of the supermicron peak were Na⁺, Ca²⁺, NO₃⁻, and Cl⁻. In the downwind region in Japan, the dust, sea salt, and a mixture of the two were found to be dominant in coarse particles in the mixed boundary layer. (4) Observation of the optical properties of dust by sky-radiometer, particle shoot absorption photometer (PSAP), and Nephelometer indicated that unpolluted dust at source region has a weaker absorption than originally believed.A sensitivity experiment of direct RF by dust indicated that single scattering albedo is the most important of the optical properties of dust and that the sensitivity of instantaneous RF in the shortwave region at the top of the atmosphere to the refractive index strongly depends on surface albedo. A global scale dust model, MASINGAR, was used for evaluation of direct RF due to dust. The results indicated the global mean RF at the top and the bottom of the atmosphere were − 0.46 and − 2.13 W m^− 2 with cloud and were almost half of the RF with cloud-free condition.