Estimation of nearshore groundwater discharge and its potential effects on a fringing coral reef

Radon (²²²Rn) measurements were conducted in Shiraho Reef (Okinawa, Japan) to investigate nearshore submarine groundwater discharge (SGD_nearshore) dynamics. Estimated average groundwater flux was 2-3 cm/h (maximum 7-8 cm/h). End-member radon concentration and gas transfer coefficient were identified as major factors influencing flux estimation accuracy. For the 7-km long reef, SGD_nearshore was 0.39-0.58 m³/s, less than 30% of Todoroki River’s baseflow discharge. SGD_nearshore was spatially and temporally variable, reflecting the strong influence of subsurface geology, tidal pumping, groundwater recharge, and hydraulic gradient. SGD_nearshore elevated nearshore nitrate concentrations (0.8-2.2 mg/l) to half of Todoroki River’s baseflow -N (2-4 mg/L). This increased nearshore Chl-a from 0.5-2 μg/l compared to the typically low Chl-a (<0.1-0.4 μg/l) in the moat. Diatoms and cyanobacteria concentrations exhibited an increasing trend. However, the percentage contributions of diatoms and cyanobacteria significantly decreased and increased, respectively. SGD may significantly induce the proliferation of cyanobacteria in nearshore reef areas.     

Emission metrics under the 2 °C climate stabilization target

In multi-gas climate policies such as the Kyoto Protocol one has to decide how to compare the emissions of different greenhouse gases. The choice of metric could have significant implications for mitigation priorities considered under the prospective negotiations for climate mitigation agreements. Several metrics have been proposed for this task with the Global Warming Potential (GWP) being the most common. However, these metrics have not been systematically compared to each other in the context of the 2 °C climate stabilization target. Based on a single unified modeling framework, we demonstrate that metric values span a wide range, depending on the metric structure and the treatment of the time dimension. Our finding confirms the basic salient point that metrics designed to represent different aspects of the climate and socio-economic system behave differently. Our result also reflects a complex interface between science and policy surrounding metrics. Thus, it is important to select or design a metric suitable for climate stabilization based on an interaction among practitioners, policymakers, and scientists.     

Crystallization temperature determination of Itokawa particles by plagioclase thermometry with X‐ray diffraction data obtained by a high‐resolution synchrotron Gandolfi camera

The crystallization temperatures of Itokawa surface particles recovered by the space probe Hayabusa were estimated by a plagioclase geothermometer using sodic plagioclase triclinicity. The Δ131‐index required for the thermometer, which is the difference in X‐ray diffraction peak positions between the 131 and 11 reflections of plagioclase, was obtained by a high‐resolution synchrotron Gandolfi camera developed for the third generation synchrotron radiation beamline, BL15XU at SPring‐8. Crystallization temperatures were successfully determined from the Δ131‐indices for four particles. The observed plagioclase crystallization temperatures were in a range from 655 to 660 °C. The temperatures indicate crystallization temperatures of plagioclases in the process of prograde metamorphism before the peak metamorphic stage.     

On-line sensing system of dynamic ship's attitude by use ofservo-type accelerometers

For an accurate automatic measurement of ship's attitude the paper proposes an intelligent online sensing system which uses four servo-type accelerometers and one servo-type inclinometer appropriately located on the ship. Through an adequate location of the accelerometers, the heaving, rolling, and pitching signals of the ship are separated from each other with adequate linear combinations of the four sensors' outputs. Furthermore, the inclinometer is utilized to extract a bias signal of the pitching. By introducing linear dynamic models and linear observation equations on the three signals, their online measurement is reduced to the state estimation of the linear dynamic systems. A bank of Kalman filters are used to execute the online state estimation and to overcome changes in parameters in the dynamic models with time     

Related Magma-Ice Interactions: Possible Origins of Chasmata, Chaos, and Surface Materials in Xanthe, Margaritifer, and Meridiani Terrae, Mars

We examine here the close spatial and temporal associations among several unique features of Xanthe and Margaritifer Terrae, specifically the Valles Marineris troughs or chasmata and their interior deposits, chaotic terrain, the circum-Chryse outflow channels, and the subdued cratered material that covers Xanthe, Margaritifer, and Meridiani Terrae. Though previous hypotheses have attempted to explain the origin of individual features or subsets of these, we suggest that they may all be related. All of these features taken together present a consistent scenario that includes the processes of sub-ice volcanism and other magma/ice interactions, results of intrusive events during Late Noachian to Early Amazonian times.     

A Flexible Prism used as an Image Stabilizer

An image stabilizer was constructed by making use of a flexible prism, which is widely used as an anti-vibration mechanism in handheld video cameras. The prism responds to frequencies up to 20 Hz, and can be simply inserted into existing optics. The performance of the prism has been confirmed by observing the Sun through it.     

Strain localization analysis by elasto-viscoplastic softening model for frozen sand

The aim of the present paper is to numerically analyse the behaviour of frozen sand by using a viscoplastic constitutive model with strain softening. A constitutive model has been developed introducing the stress history tensor which is a functional of the stress history, with respect to a generalized time measure. It is shown that Adachi and Oka's model is applicable to the results of triaxial tests on a frozen Toyoura sand at different strain rates. First, the instability of the model is discussed within the framework of bifurcation theory. The model is then implemented into a FEM code to numerically simulate the behaviour under plane strain conditions. From the numerical results, it is revealed that the formation of shear bands is possible and the characteristics of strain localization, such as shear banding, depend on the strain rates.     

Modern Numerical Schemes for Solving Magnetohydrodynamic Equations

In this paper several modern shock-capturing schemes for solving hydrodynamic and magnetohydrodynamic equations are reviewed. This review covers a wide range of explicit and implicit schemes as well as those in which adaptive mesh refinement methods are adopted. As these numerical schemes are based on Riemann solvers which use Godunov-type techniques, they are well suited for strong shocks and other discontinuities without oscillations in the flow variables. Some other numerical issues as grid generation, divergence cleaning, and an application of MHD schemes to several problems in coronal and interplanetary physics are discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

A near-infrared fabry-perot imager at CRL 1.5m telescope and the structure and velocity field of shocked H2 emission in orion KL region

We have developed a near-infrared Fabry-Perot imager at the Nasmyth focus of the Communications Research Laboratory (CRL) 1.5 m telescope at Tokyo. Using this wide field Fabry-Perot imager, we obtained continuum-subtracted images of the H₂ v=1–0 S(1) line for the Orion KL region.