Screening Indian Mustard Genotypes for Phytoremediating Arsenic‐Contaminated Soils

Ten Indian mustard (Brassica juncea L.) genotypes were screened for their phytoremediation potential for arsenic (As) contaminated water under laboratory‐controlled conditions. The genotypes were grown in a hydroponic chamber for 20 days in 250‐mL beakers containing As‐contaminated water. During plant development, changes in plant growth, biomass, and total As were evaluated. Of the 10 genotypes (Pusa Agrani, BTO, Pusa Kranti, Pusa Bahar, Pusa Bold, Pusa Basant, Pusa Jai Kisan, Arka Vardhan, Varuna, and Vaibhav) Pusa Jai Kisan was the most effective in phytoremediating As‐contaminated water under hydroponic conditions. This will provide new information for Indian mustard genotypes for phytoremediating As‐contaminated soils.     

Earthquake source characteristics along the arcuate Himalayan belt: Geodynamic implications

The occurrences of moderate to large magnitude earthquakes and associated subsurface geological processes were critically examined in the backdrop of Indian plate obliquity, stress obliquity, topography, and the late Tertiary regional tectonics for understanding the evolving dynamics and kinematics in the central part of the Himalayas. The higher topographic areas are likely associated with the zones of depressions, and the lower topographic areas are found around the ridges located in the frontal part of the orogen. A positive correlation between plate and stress obliquities is established for this diffuse plate boundary. We propose that the zone of sharp bending of the descending Indian lithosphere is the nodal area of major stress accumulation which is released occasionally in form of earthquakes. The lateral geometry of the Himalayas shows clusters of seismicity at an angle of ～20^° from the centre part of the arc. Such spatial distribution is interpreted in terms of compression across the arc and extension parallel to the arc. This biaxial deformation results in the development of dilational shear fractures, observed along the orogenic belt, at an angle of ～20^° from the principal compressive stress axis.     

Isotope–geochemical characterization and geothermometrical modeling of Uttarakhand geothermal field,India

Uttarakhand geothermal area, located in the central belt of the Himalayan geothermal province, is one of the important high temperature geothermal fields in India. In this study, the chemical characteristics of the thermal waters are investigated to identify the main geochemical processes affecting the composition of thermal waters during its ascent toward the surface as well as to determine the subsurface temperature of the feeding reservoir. The thermal waters are mainly Ca–Mg–HCO₃ type with moderate silica and TDS concentrations. Mineral saturation states calculated from PHREEQC geochemical code indicate that thermal waters are supersaturated with respect to calcite, dolomite, aragonite, chalcedony, quartz (SI > 0), and undersaturated with respect to gypsum, anhydrite, and amorphous silica (SI < 0). XRD study of the spring deposit samples fairly corroborates the predicted mineral saturation state of the thermal waters. Stable isotopes (δ¹⁸O, δ²H) data confirm the meteoric origin of the thermal waters with no oxygen-18 shift. The mixing phenomenon between thermal water with shallow ground water is substantiated using tritium (³H) and chemical data. The extent of dilution is quantified using tritium content of thermal springs and non-thermal waters. Classical geothermometers, mixing model, and multicomponent fluid geothermometry modeling (GeoT) have been applied to estimate the subsurface reservoir temperature. Among different classical geothermometers, only quartz geothermometer provide somewhat reliable estimation (96–140 °C) of the reservoir temperature. GeoT modeling results suggest that thermal waters have attained simultaneous equilibrium with respect to minerals like calcite, quartz, chalcedony, brucite, tridymite, cristobalite, talc, at the temperature 130 ± 5 °C which is in good agreement with the result obtained from the mixing model.     

Integrated approach of geospatial visualization and modeling for groundwater management in hard rock terrains in Nagpur Urban Area,India

Groundwater management requires complete visualization of aquifer characteristics to understand scientific aspects and hence remains a challenge, especially in hard rock terrains. In the present research paper, a comprehensive approach using 3D stratigraphic model, fence diagrams and numerical modeling has been proposed to understand the groundwater status for effective recharge. The stratigraphy, groundwater flow, and groundwater fluctuations for the period 1999–2010 were analyzed. The total volume of formations, volume of voids, storage capacity, and quantities of recharge of unconfined aquifer system in the Nagpur urban area were estimated. The steady state groundwater flow model of Basalt formation was calibrated to evaluate the subsurface system using Processing Modflow (PMWIN 5.3.2). The calibrated hydraulic head is compared with field observed head. The comparative spatial analysis presents a simple integrated approach in identifying zones with falling groundwater trends suitable for groundwater recharge in hard rock terrain in Nagpur urban area.     

Near-source strong motion database catalog for Iran

This paper discusses a newly developed high-quality integrated dataset of shallow earthquake ground motions that occurred in Iran, from 1976 to 2013. A total of 860 three-component strong motion records are processed from 183 earthquake events, moment magnitudes 5.0?≤?M _w ?≤?7.4, and rupture distances of R _RUP  ≤ 120 km. Strong motion data from Iran having special tectonic features and shallow earthquakes with depths less than 35 km are included. This paper presents a thorough procedure used to collect and to generate a database following the Next-Generation Attenuation-West research projects. This database can be used in the development and ranking of ground motion models and for seismological and engineering hazard and risk analyses. Unprocessed strong motion records are obtained from the Iranian Strong Motion Network (ISMN). The time series collected were thoroughly examined through several rounds of quality reviews. The newly generated database includes the peak ground acceleration, peak ground velocity, and pseudo-spectral acceleration for the 5% damped with periods ranging from 0.01 to 10 s. The database also includes ground motion information and source characterization and parameters. This study is the near-source compiled ground motion database that can be used for Iran, and it is consistent with standard worldwide databases.     

Determination of water balance equation components in irrigated agricultural watersheds using SWAT and MODFLOW models : A case study of Samalqan plain in Iran

Increasing water demands,especially in arid and semi-arid regions,continuously exacerbate groundwater as the only reliable water resources in these regions.Samalqan watershed,Iran,is a groundwater-based irrigation watershed,so that increased aquifer extraction,has caused serious groundwater depletion.So that the catchment consists of surface water,the management of these resources is essential in order to increase the groundwater recharge.Due to the existence of rivers,the low thickness of the alluvial sediments,groundwater level fluctuations and high uncertainty in the calculation of hydrodynamic coefficients in the watershed,the SWAT and MODFLOW models were used to assess the impact of irrigation return flow on groundwater recharge and the hydrological components of the basin.For this purpose,the irrigation operation tool in the SWAT model was utilized to determine the fixed amounts and time of irrigation for each HRU(Hydrological Response Unit)on the specified day.Since the study area has pressing challenges related to water deficit and sparsely gauged,therefore,this investigation looks actual for regional scale analysis.Model evaluation criteria,RMSE and NRMSE for the simulated groundwater level were 1.8 m and 1.1%respectively.Also,the simulation of surface water flow at the basin outlet,provided satisfactory prediction(R²=0.92,NSE=0.85).Results showed that,the irrigation has affected the surface and groundwater interactions in the watershed,where agriculture heavily depends on irrigation.Annually 11.64 Mm3 water entered to the aquifer by surface recharge(precipitation,irrigation),transmission loss from river and recharge wells 5.8 Mm3 and ground water boundary flow(annually 20.5 Mm³).Water output in the watershed included ground water extraction and groundwater return flow(annually 46.4 Mm³)and ground water boundary flow(annually 0.68 Mm³).Overally,the groundwater storage has decreased by 9.14 Mm3 annually in Samalqan aquifer.This method can be applied to simulate the effects of surface water fluxes to groundwater recharge and river-aquifer interaction for areas with stressed aquifers where interaction between surface and groundwater cannot be easily assessed.     

Observations on the ichnospecies <Emphasis Type="Italic">Monomorphichnus multilineatus</Emphasis> from the Nagaur Sandstone (Cambrian Series 2-Stage 4), Marwar Supergroup,India

The Ediacaran–Cambrian Marwar Supergroup exposed in the western Rajasthan, India yielded abundant sigmoidal scratches assigned to ichnospecies Monomorphichnus multilineatus from the Nagaur Sandstone belonging to the Cambrian (Series 2-Stage 4). Nagaur M. multilineatus are recorded from the intertidal regime. It is an addition to already known depositional environments for this ichnospecies, which are known from shallow marine, wave-dominated, to non-marine or brackish water and storm-dominated sequences. Classical systematics of M. multilineatus is enriched with additional information in the paper. Its significance has been discussed regarding the palaeoecology of trace producers. Comprehensive statistical analyses help reveal its behaviour and feeding pattern of the causative organism of M. multilineatus. Hierarchical Cluster Analysis (HCA), average linkage and Pearson Correlation were performed to establish the natural grouping and behaviour of the specimens. HCA indicates that the studied Nagaur specimens belong to ichnogenera Monomorphicnus and ichnospecies, i.e., multilineatus. Pearson correlation, involving thickness and length of individual specimen, was positive. It indicates that the amount of food required by individual adult specimen was more and thereby requiring more grazing to provide enough food for survival. All the known occurrences of M. multilineatus are reviewed in the present study for their mode of preservation, depositional environment, palaeoecology and taphonomy.     

New magnitude scaling relations for earthquake early warning in the Alborz region,Iran

Rapid magnitude estimation relations for earthquake early warning systems in the Alborz region have been developed based on the initial first seconds of the P-wave arrival. For this purpose, a total of 717 accelerograms recorded by the Building and Housing Research Center in the Alborz region with the magnitude (M_w) range of 4.8–6.5 in the period between 1995 and 2013 were employed. Average ground motion period (\( \tau_{\text{c}} \)) and peak displacement (\( P_{\text{d}} \)) in different time windows from the P-wave arrival were calculated, and their relation with magnitude was examined. Four earthquakes that were excluded from the analysis process were used to validate the results, and the estimated magnitudes were found to be in good agreement with the observed ones. The results show that using the proposed relations for the Alborz region, earthquake magnitude could be estimated with acceptable accuracy even after 1 s of the P-wave arrival.     

Extracting 21 cm signal by frequency and angular filtering

Extracting the neutral hydrogen(HI) signal is a great challenge for cosmological 21 cm experiments; both the astrophysical foregrounds and receiver noise are typically several orders of magnitude greater than the 21 cm signal. However, the different properties of the 21 cm signal, foreground and noise can be exploited to separate these components. The foregrounds are generally smooth or correlated over the frequency space along a line of sight(Lo S), while both the 21 cm signal and noise vary stochastically along the same Lo S. The foreground can be removed by filtering out the smooth component in frequency space. The receiver noise is basically uncorrelated for observations at different times, hence for surveys it is also uncorrelated in different directions, while the 21 cm signal, which traces the large scale structure, is correlated up to certain scales. In this exercise, we apply Wiener filters in frequency and angular space to extract the 21 cm signals. We found that the method works well. Inaccurate knowledge about the beam could degrade the reconstruction, but the overall result is still good, showing that the method is fairly robust.