Arsenic mobility in alteration products of sulfide-rich, arsenopyrite-bearing mine wastes, Snow Lake, Manitoba, Canada

The Arsenopyrite Residue Stockpile (ARS) in Snow Lake, Manitoba contains approximately 250,000 tons of cyanide treated, refractory arsenopyrite ore concentrate. The residue was deposited between 1950 and 1959 in an open waste rock impoundment, and remained exposed until 2000, when the pile was capped with layers of waste rock and clay. During the time when the ARS was exposed to the atmosphere, arsenopyrite, pyrrhotite, pyrite and chalcopyrite were oxidized producing scorodite, jarosite and two generations of amorphous Fe sulfo-arsenates (AISA). These secondary phases attenuated some of the As released to pore water during oxidation in the upper layers of the ARS. The imposition of the cap prevented further oxidation. The secondary As minerals are not stable in the reduced environment that currently dominates the pile. Therefore, As currently is being released into the groundwater. Water in an adjacent monitoring well has concentrations of >20 mg/L total As with relative predominance of As(III).     

Lithostratigraphic position and petrographic characteristics of R.A.T. (“Roches Argilo-Talqueuses”) Subgroup, Neoproterozoic Katangan Belt (Congo)

The Neoproterozoic Katangan R.A.T. (“Roches Argilo-Talqueuses”) Subgroup is a sedimentary sequence composed of red massive to irregularly bedded terrigenous-dolomitic rocks occurring at the base of the Katangan succession in Congo. Red R.A.T. is rarely exposed in a continuous section because it was affected by a major layer-parallel décollement during the Lufilian thrusting. However, in a number of thrust sheets, Red R.A.T. is in conformable sedimentary contact with Grey R.A.T which forms the base of the Mines Subgroup. Apart from the colour difference reflecting distinct depositional redox conditions, lithological, petrographical and geochemical features of Red and Grey R.A.T. are similar. A continuous sedimentary transition between these two lithological units is shown by the occurrence of variegated to yellowish R.A.T. The D. Strat. “Dolomies Stratifiées” formation of the Mines Subgroup conformably overlies the Grey R.A.T. In addition, a transitional gradation between Grey R.A.T. and D. Strat. occurs in most Cu–Co mines in Katanga and is marked by interbedding of Grey R.A.T.-type and D. Strat.-type layers or by a progressive petrographic and lithologic transition from R.A.T. to D. Strat. Thus, there is an unquestionable sedimentary transition between Grey R.A.T. and D. Strat. and between Grey R.A.T. and Red R.A.T.The R.A.T. Subgroup stratigraphically underlies the Mines Subgroup and therefore R.A.T. cannot be comprised of syn-orogenic sediments deposited upon the Kundelungu (formerly “Upper Kundelungu”) Group as suggested by Wendorff (2000). As a consequence, the Grey R.A.T. Cu–Co mineralisation definitely is part of the Mines Subgroup Lower Orebody, and does not represent a distinct generation of stratiform Cu–Co sulphide mineralisation younger than the Roan orebodies.     

Preliminary data on chemical changes in the Aral Sea during low-level periods from the last 9000 years

The withdrawal of the Aral Sea tributaries (Amu and Syr Daria) for cultures has led to significant falls of its level and an important increase in its salinity. During the Holocene, a succession of low and high water inputs occurred. Silty deposits correspond to the high levels and carbonates to the low levels. This study makes a distinction between the Syr Daria and the Amu Daria water inputs during low-level periods by using mineralogical and chemical compositions of the carbonates deposits. Waters from the Syr Daria are more sulphatic and have a low iron content in comparison with that of the Amu Daria. The Syr Daria was the major tributary around 7500, 4956 and 970 yr?BP, whereas around 6200 and 3610 yr?BP, inflow also from the Amu Daria is observed. To cite this article: L. Le Callonnec et al., C. R. Geoscience 337 (2005).     

On Tension Failure of 2-D Rock Specimens and Associated Acoustic Emission

Summary To understand the failure mechanism of quasi-brittle materials like rock under tensile stress, observations on the failure process of granite and marble plate specimens under tension are summarized and presented. Micro- and macro-failure properties of rock plates under uniaxial tension have been characterized by using an acoustic emission technique. Acoustic emission signals associated with micro-fractures are captured to locate the sources. An algorithm based on arrival time difference is developed for this purpose. The results reveal clearly the failure processes of rock which include initiation, nucleation and propagation of micro-fractures when the axial stress is close to the peak strength of rock. It is believed that the difference in heterogeneity between granite and marble specimens leads to different fracture shapes and different behaviors of associated acoustic emissions. Numerical simulation of acoustic emissions for two-dimensional tensile test is also carried out. The simulated characteristics are in good agreement with the experimental results.     

Use of in situ-produced Be in carbonate-rich environments: A first attempt

We have determined the production rate of in situ-produced ¹⁰Be in calcite through measurements of ¹⁰Be and ³⁶Cl concentrations in the same calcite samples and of ¹⁰Be concentrations in depth profiles of flint from the same erosional surface. This yields a ¹⁰Be production rate in calcite of 37.9 ± 6.0 at/g/yr at sea level and high latitude, approximately sixfold higher than production in the coexisting flint. We propose that this higher rate of production may be due to high production cross sections for C spallation by cosmic rays with energies below 50 MeV. These results also open the possibility of dating burial events in carbonate-rich environments by differential radioactive decay of ¹⁰Be and ³⁶Cl.     

The effects of solution chemistry on the sticking efficiencies of viable Enterococcus faecalis: An atomic force microscopy and modeling study

Atomic force microscopy (AFM) and Derjaguin-Landau-Verwey-Overbeek (DLVO) theory in combination with the interaction force boundary layer (IFBL) model have been used to empirically and theoretically calculate sticking efficiencies (α) of Enterococcus faecalis cells against a silica glass surface. Sticking efficiencies were calculated in solutions of varying pH and ionic strength and related to maximum distances of transport through a hypothetical soil block using colloid filtration theory.AFM measurements show that the repulsive and attractive forces between E. faecalis cells and a glass surface are a function of ionic strength but are less sensitive to changes in solution pH. Zeta (ζ)-potential measurements of the cells and glass surfaces correlate with these trends. Calculated DLVO energy profiles predict much greater sensitivity to changing solution chemistry. Sticking efficiencies derived from AFM measurements range from 9.6 × 10⁻¹⁷ to 1 in solutions of low ionic strength (IS) and from 2.6 × 10⁻³³ to 1 at higher IS. Corresponding α values determined from DLVO theory are essentially zero in all tested solutions.Sticking efficiencies calculated in this study are smaller than values determined from column and field studies in similar systems; however, α derived from AFM data and the IFBL model more closely represent field data than do values calculated from DLVO energy values. A comparison with different methods of calculating α suggests that reversible adhesion may be significant in column-scale transport studies.     

Planetesimal sulfate and aqueous alteration in CM and CI carbonaceous chondrites

Water-soluble sulfate salts extracted from six CM chondrites have oxygen isotope compositions that are consistent with an extraterrestrial origin. The Δ¹⁷O of sulfate are correlated with previously reported whole rock δ¹⁸O and with an index of meteorite alteration, and may display a correlation with the date of the fall. The enrichments and depletions for Δ¹⁷O of water-soluble sulfate from the CM chondrites relative to the terrestrial mass dependent fractionation line are consistent with sulfate formation in a rock dominated asteroidal environment, and from aqueous fluids that had undergone relatively low amounts of oxygen isotope exchange and little reaction with anhydrous components of the meteorites. It is unresolved how the oxidation of sulfide to sulfate can be reconciled with the inferred low oxidation state during the extraterrestrial alteration process. Oxygen isotope data for two CI chondrites, Orgueil and Ivuna, as well as the ungrouped C2 chondrite Essebi are indistinguishable from sulfate of terrestrial origin and may be terrestrial weathering products, consistent with previous assertions. Our oxygen isotope data, however, can not rule out a preterrestrial origin either.