Evaluating coastal scenery using fuzzy logic: Application at selected sites in Western Black Sea coastal region of Turkey

Coastal areas of the world are under treat due to the conflicting requirements of functions such as habitation and/or recreation, which affect the strategic asset of coastal scenery itself. Coastal managers, together with planners, need coastal landscape inventories, where the quality of coastal scenery is a part of the inventory. In order to provide an evidence-based approach for sound coastal management decisions, [Ergin et al., 2004] and [Ergin et al., 2006] developed a novel technique ‘coastal scenic evaluation’ (CSE), which addresses the evaluation of coastal scenery. The CSE technique utilizes fuzzy logic to derive values obtained from a checklist of 26 physical and human parameters. The methodology enables the calculation of an evaluation index (D), which categorizes the scenic values of coastal sites into five distinct classes. Using this technique, coastal scenic evaluations were carried out at 34 selected sites on the Western Black Sea coast of Turkey. Based on the calculated D values, a five-class differentiation was obtained for the selected sites, to provide baseline information for any envisaged subsequent management plans for these areas.     

Improving strategies with constraints regarding non-Gaussian statistics in a three-dimensional variational assimilation method

We assess validity of a Gaussian error assumption, the basic assumption in data assimilation theory, and propose two kinds of constraints regarding non-Gaussian statistics. In the mixed water region (MWR) off the east coast of Japan exhibiting complicated frontal structures, a probability density function (PDF) of subsurface temperature shows double peaks corresponding to the Kuroshio and Oyashio waters. The complicated frontal structures characterized by the temperature PDF sometimes cause large innovations, bringing about a non-Gaussianity of errors. It is also revealed that assimilated results with a standard three-dimensional variational (3DVAR) scheme have some issues in MWR, arising from the non-Gaussianity of errors. The Oyashio water sometimes becomes unrealistically cold. The double peaks seen in the observed temperature PDF are too smoothed. To improve the assimilated field in MWR, we introduce two kinds of constraints, J _c1 and J _c2, which model the observed temperature PDF. The constraint J _c1 prevents the unrealistically cold Oyashio water, and J _c2 intends to reproduce the double peaks. The assimilated fields are significantly improved by using these constraints. The constraint J _c1 effectively reduces the unrealistically cold Oyashio water. The double peaks in the observed temperature PDF are successfully reproduced by J _c2. In addition, not only subsurface temperature but also whole level temperature and salinity (T–S) fields are improved by adopting J _c1 and J _c2 to a multivariate 3DVAR scheme with vertical coupled T–S empirical orthogonal function modes.     

Updated Expressions for Determining Temperatures and Emission Measures from Goes Soft X-Ray Measurements

{We investigate the conversion of the 0.5–4 and 1–8 Å soft X-ray flux measurements made by detectors on the Geostationary Operational Environmental Satellites (GOES) into temperature and emission measures of coronal plasma using modern spectral models and modern understanding of coronal abundances. In particular, the original analysis by Thomas, Starr and Crannell (1985) is updated to take into account the realization that coronal abundances may be quite different from photospheric abundances. An important result of this analysis is that the derived temperatures and emission measures depend strongly on the assumed abundances even at high temperatures where continuum rather than spectral lines dominates the Sun’s X-ray spectrum. This occurs because the higher coronal abundances mean that most of the continuum is due to free–bound emission processes, not free–free emission, and thus is abundance-dependent. We find significant differences between modern calculations of the temperature response of the flux measurements and the versions currently in use: for a typical flare, emission measures may be up to a factor of 4 smaller than the current software suggests. Derived temperatures are similar for both photospheric and coronal abundances for cool flares (e.g., 15 MK), but for hot flares (e.g., 35 MK) coronal abundances can lead to significantly (~25%) lower temperatures being derived.     

The effect of screening factors and thermonuclear reaction rates in the pre-main sequence evolution of low mass stars

In understanding the nucleosynthesis of the elements in stars, one of the most important quantities is the reaction rate and it must be evaluated in terms of the stellar temperature T, and its determination involves the knowledge of the excitation function σ(E) of the specific nuclear reaction leading to the final nucleus. In this paper, the effect of thermonuclear reaction rates to the pre-main sequence evolution of low mass stars having masses 0.7, 0.8, 0.9 and 1M_⊙ are studied by using our modified Stellar Evolutionary Program.     

A site evaluation campaign for a ground based atmospheric Cherenkov telescope in Romania

Around the world, several scientific projects share the interest of a global network of small Cherenkov telescopes for monitoring observations of the brightest blazars??the DWARF network. A small, ground based, imaging atmospheric Cherenkov telescope of last generation is intended to be installed and operated in Romania as a component of the DWARF network. To prepare the construction of the observatory, two support projects have been initiated. Within the framework of these projects, we have assessed a number of possible sites where to settle the observatory. In this paper we submit a brief report on the general characteristics of the best four sites selected after the local infrastructure, the nearby facilities and the social impact criteria have been applied.     

Oil-generation kinetics for organic facies with Type-II and -IIS kerogen in the Menilite Shales of the Polish Carpathians

The Menilite Shales (Oligocene) of the Polish Carpathians are the source of low-sulfur oils in the thrust belt and some high-sulfur oils in the Carpathian Foredeep. These oil occurrences indicate that the high-sulfur oils in the Foredeep were generated and expelled before major thrusting and the low-sulfur oils in the thrust belt were generated and expelled during or after major thrusting. Two distinct organic facies have been observed in the Menilite Shales. One organic facies has a high clastic sediment input and contains Type-II kerogen. The other organic facies has a lower clastic sediment input and contains Type-IIS kerogen. Representative samples of both organic facies were used to determine kinetic parameters for immiscible oil generation by isothermal hydrous pyrolysis and S₂ generation by non-isothermal open-system pyrolysis. The derived kinetic parameters showed that timing of S₂ generation was not as different between the Type-IIS and -II kerogen based on open-system pyrolysis as compared with immiscible oil generation based on hydrous pyrolysis. Applying these kinetic parameters to a burial history in the Skole unit showed that some expelled oil would have been generated from the organic facies with Type-IIS kerogen before major thrusting with the hydrous-pyrolysis kinetic parameters but not with the open-system pyrolysis kinetic parameters. The inability of open-system pyrolysis to determine earlier petroleum generation from Type-IIS kerogen is attributed to the large polar-rich bitumen component in S₂ generation, rapid loss of sulfur free-radical initiators in the open system, and diminished radical selectivity and rate constant differences at higher temperatures. Hydrous-pyrolysis kinetic parameters are determined in the presence of water at lower temperatures in a closed system, which allows differentiation of bitumen and oil generation, interaction of free-radical initiators, greater radical selectivity, and more distinguishable rate constants as would occur during natural maturation. Kinetic parameters derived from hydrous pyrolysis show good correlations with one another (compensation effect) and kerogen organic-sulfur contents. These correlations allow for indirect determination of hydrous-pyrolysis kinetic parameters on the basis of the organic-sulfur mole fraction of an immature Type-II or -IIS kerogen.     

Discussion: “Xenoliths in ultrapotassic volcanic rocks in the Lhasa block: direct evidence for crust–mantle mixing and metamorphism in the deep crust” by Wang et al. 2016 (Contributions to Mineralogy and Petrology) 171:62

Wang et al. (Contrib Mineral Petrol 171:62, 2016a) present data on composition of xenolith from Southern Tibet and conclude that ulrapotassic melts from the region formed by melting mantle, and complex interaction with a crustal component. In this discussion we demonstrate that numerous observations presented by Wang et al. (2016a) can be explained by partial melting of crust followed by interaction between that melt and the mantle. We show that this model can explain the variability of magmas in such suits without evoking occurrence of coincidental, unrelated events. Moreover we demonstrate that our model of a crustal origin of the proto-shoshonite melts is now supported by independent lines of evidence such as geochemistry of restites after high- and ultrahigh- pressure melting and melt inclusion studies.     

Stability of phlogopite in ultrapotassic kimberlite-like systems at 5.5–7.5 GPa

Hydrous K-rich kimberlite-like systems are studied experimentally at 5.5–7.5 GPa and 1200–1450?°C in terms of phase relations and conditions for formation and stability of phlogopite. The starting samples are phlogopite–carbonatite–phlogopite sandwiches and harzburgite–carbonatite mixtures consisting of Ol?+?Grt?+?Cpx?+?L (±Opx), according to the previous experimental results obtained at the same P–T parameters but in water-free systems. Carbonatite is represented by a K- and Ca-rich composition that may form at the top of a slab. In the presence of carbonatitic melt, phlogopite can partly melt in a peritectic reaction at 5.5 GPa and 1200–1350?°C, as well as at 6.3–7.0 GPa and 1200?°C: 2Phl?+?CaCO₃ (L)?Cpx?+?Ol?+?Grt?+?K₂CO₃ (L)?+?2H₂O (L). Synthesis of phlogopite at 5.5 GPa and 1200–1350?°C, with an initial mixture of H₂O-bearing harzburgite and carbonatite, demonstrates experimentally that equilibrium in this reaction can be shifted from right to left. Therefore, phlogopite can equilibrate with ultrapotassic carbonate–silicate melts in a?≥?150?°C region between 1200 and 1350?°C at 5.5 GPa. On the other hand, it can exist but cannot nucleate spontaneously and crystallize in the presence of such melts in quite a large pressure range in experiments at 6.3–7.0 GPa and 1200?°C. Thus, phlogopite can result from metasomatism of peridotite at the base of continental lithospheric mantle (CLM) by ultrapotassic carbonatite agents at depths shallower than 180–195 km, which creates a mechanism of water retaining in CLM. Kimberlite formation can begin at 5.5 GPa and 1350?°C in a phlogopite-bearing peridotite source generating a hydrous carbonate–silicate melt with 10–15 wt% SiO₂, Ca# from 45 to 60, and high K enrichment. Upon further heating to 1450?°C due to the effect of a mantle plume at the CLM base, phlogopite disappears and a kimberlite-like melt forms with SiO₂ to 20 wt% and Ca#?=?35–40.     

Crystallization conditions of peraluminous charnockites: constraints from mineral thermometry and thermodynamic modelling

Most igneous charnockites are interpreted to have crystallized at hot and dry conditions, i.e. at >800?°C and <3 wt.% H₂O and with an important CO₂ component in the system. These charnockites are metaluminous to weakly peraluminous and their formation involves a significant mantle-derived component. This study, in contrast, investigates the crystallization conditions of strongly peraluminous, metasediment-sourced charnockites from the Qinzhou Bay Granitic Complex, South China. To constrain the temperature-melt H₂O crystallization paths for the studied peraluminous charnockites, petrographic characterization was combined with fluid inclusion compositional data, mineral thermometry, and thermodynamic modelling. The uncertainties of the thermodynamic modelling in reconstructing the crystallization conditions of the granitic magmas have been evaluated by comparison between modelled and experimental phase relations for a moderately evolved, peraluminous granite (~70 wt.% SiO₂). The comparison suggests that the modelling reproduces the experimentally derived phase saturation boundaries with uncertainties of 20–60?°C and 0.5–1 wt.% H₂O for systems with ≤1–2 wt.% initial melt H₂O at ~0.2 GPa. For the investigated natural systems, the thermometric estimates and modelling indicate that orthopyroxene crystallized at relatively low temperature (750–790?±?30?°C) and moderately high to high melt H₂O content (3.5–5.6?±?0.5 wt.%). The charnockites finally solidified at relatively “cold” and “wet” conditions. This suggests that thermodynamic modelling affords a possible approach to constrain charnockite crystallization as tested here for peraluminous, moderately low pressure (≤0.3 GPa), and overall H₂O-poor systems (≤1–2 wt.% H₂O total), but yields results with increasing uncertainty for high-pressure or H₂O-rich granitic systems.