The structural inventory of a small complex impact crater: Jebel Waqf as Suwwan,Jordan

The investigation of terrestrial impact structures is crucial to gain an in‐depth understanding of impact cratering processes in the solar system. Here, we use the impact structure Jebel Waqf as Suwwan, Jordan, as a representative for crater formation into a layered sedimentary target with contrasting rheology. The complex crater is moderately eroded (300–420 m) with an apparent diameter of 6.1 km and an original rim fault diameter of 7 km. Based on extensive field work, IKONOS imagery, and geophysical surveying we present a novel geological map of the entire crater structure that provides the basis for structural analysis. Parametric scaling indicates that the structural uplift (250–350 m) and the depth of the ring syncline (<200 m) are anomalously low. The very shallow relief of the crater along with a NE vergence of the asymmetric central uplift and the enhanced deformations in the up‐range and down‐range sectors of the annular moat and crater rim suggest that the impact was most likely a very oblique one (~20°). One of the major consequences of the presence of the rheologically anisotropic target was that extensive strata buckling occurred during impact cratering both on the decameter as well as on the hundred‐meter scale. The crater rim is defined by a circumferential normal fault dipping mostly toward the crater. Footwall strata beneath the rim fault are bent‐up in the down‐range sector but appear unaffected in the up‐range sector. The hanging wall displays various synthetic and antithetic rotations in the down‐range sector but always shows antithetic block rotation in the up‐range sector. At greater depth reverse faulting or folding is indicated at the rim indicating that the rim fault was already formed during the excavation stage.     

Variations of the geomagnetic dipole magnitude over the past 400 My

The international bank of the virtual dipole moment data supplemented by the values from more recent publications is used as the basis for an analysis of the behavior of the virtual dipole moment values over the last 400 My. The results obtained revealed a positive linear trend from 4.1 × 10²² to 5.7 × 10²² A m² during the last 400 My. Against the background of the linear increase, fluctuations with a periodicity of about 40 My were observed. In the Phanerozoic time, minimums within the intervals of 340–370, 290–300, 240–270, 190–210, 165-140 (chrons M17-M43), 130-120 (chrons M2-M10), 100–110 (chron 34), 75–85 (chron C33 and the beginning of chron C34), 70-60 (chrons C31-C27), and 40-15 (chrons C18-C5AD) My B.P. are found. The distribution of the virtual dipole moment is strictly related to the distribution of the ancient geomagnetic field and may be taken into consideration when modeling the magnetization of the inversive magnetic layer of the ocean.     

Health risk assessment of trace elements in drinking water from Najran City,southwestern Saudi Arabia

The concentrations of 16 trace elements (Ag, Al, As, B, Ba, Cd, Cr, Cu, Hg, Mn, Ni, Pb, Se, Ti, U, and Zn) in drinking water from Najran City, Saudi Arabia, were determined by inductively coupled plasma-mass spectrometry (ICP-MS) and compared with local, regional, and international guidelines. Water samples from 22 water treatment plants and 13 commercial bottled water brands were analyzed. Except for B and U, the trace element concentrations were below the permitted limits defined in SASO, GSO, and WHO drinking water quality guidelines. The B concentrations in three brands of bottled water were 533.19, 602.29, and 1471.96 μg/L, which were all higher than the GSO and SASO limit (500 μg/L). The U concentrations were higher than the SASO limits for drinking water in two samples; one in treatment plant (2.39 μg/L) and another in foreign bottled water (2.17 μg/L). The median As, Ba, Cu, Ni, U, and Zn concentrations were statistically significantly higher in the treatment plant water samples than those in the bottled water samples, and conversely, the B concentrations were higher in the bottled water samples. The Cd, Hg, and Ti concentrations were below the detection limits of ICP-MS in all of the water samples. Apart from few exceptions, trace element concentrations in drinking water of Najran City were all within limits permitted in the national, regional, and international drinking water quality guideline values.     

Precise Seismic Substructural Model of the Eocene Chorgali Limestone in the Turkwal Oil Field,Central Potwar,Pakistan

The precise seismic substructural interpretation of the Turkwal oil field in the Central Potwar region of district Chakwal of Pakistan has been carried out. The research work was confined to the large fore-thrust that serves as an anticlinal structural trap through ten 2D seismic lines. A precise seismic substructural model of the Eocene Chorgali Limestone with precise orientation of thrust and oblique slip faults shows the presence of a huge fracture, which made this deposit a good reservoir. The abrupt surface changes in dip azimuth for the Eocene Chorgali Limestone verifies the structural trends and also the presence of structural traps in the Turkwal field. The logs of three wells (Turkwal deep X-2, Turkwal-01 and Fimkassar-01) were analyzed for petrophysical studies, well synthetic results and generation of an Amplitude Versus Offset (AVO) model for the area. The AVO model of Turkwal deep X-2 shows abrupt changes in amplitude, which depicts the presence of hydrocarbon content. Well correlation technique was used to define the overall stratigraphic setting and the thickness of the reservoir formation in two wells, Turkwal-01 and Turkwal deep X-2. The Eocene Chorgali Limestone in Turkwal-01 is an upward thrusted anticlinal structure and because of the close position of both wells to the faulted anticlinal structure, its lesser thickness differs compared to Turkwal deep X-2. The overall results confirm that the Turkwal field is comparable to several similar thrust-bound oil-bearing structures in the Potwar basin.     

Persistent rings in and around Jupiter’s anticyclones – Observations and theory

We present observations and theoretical calculations to derive the vertical structure of and secondary circulation in jovian vortices, a necessary piece of information to ultimately explain the red color in the annular ring inside Jupiter’s Oval BA. The observations were taken with the near-infrared detector NIRC2 coupled to the adaptive optics system on the 10-m W.M. Keck telescope (UT 21 July 2006; UT 11 May 2008) and with the Hubble Space Telescope at visible wavelengths (UT 24 and 25 April 2006 using ACS; UT 9 and 10 May 2008 using WFPC2). The spatial resolution in the near-IR (∼0.1–0.15″ at 1–5 μm) is comparable to that obtained at UV–visible wavelengths (∼0.05–0.1″ at 250–890 nm). At 5 μm we are sensitive to Jupiter’s thermal emission, whereas at shorter wavelengths we view the planet in reflected sunlight. These datasets are complementary, as images at 0.25–1.8 μm provide information on the clouds/hazes in the troposphere–stratosphere, while the 5-μm emission maps yield information on deeper layers in the atmosphere, in regions without clouds. At the latter wavelength numerous tiny ovals can be discerned at latitudes between ∼45°S and 60°S, which show up as rings with diameters ?1000 km surrounding small ovals visible in HST data. Several white ovals at 41°S, as well as a new red oval that was discovered to the west of the GRS, also reveal 5-μm bright rings around their peripheries, which coincide with dark/blue rings at visible wavelengths. Typical brightness temperatures in these 5-μm bright rings are 225–250 K, indicative of regions that are cloud-free down to at least the ∼4 bar level, and perhaps down to 5–7 bar, i.e., well within the water cloud.Radiative transfer modeling of the 1–2 μm observations indicates that all ovals, i.e., including the Great Red Spot (GRS), Red Oval BA, and the white ovals at 41°S, are overall very similar in vertical structure. The main distinction between the ovals is caused by variations in the particle densities in the tropospheric–stratospheric hazes (2–650 mbar). These are 5–8 times higher above the red ovals than above the white ones at 41°S. The combination of the 5-μm rings and the vertical structure derived from near-IR data suggests anticyclones to extend vertically from (at least) the water cloud (∼5 bar) up to the tropopause (∼100–200 mbar), and in some cases into the stratosphere.Based upon our observations, we propose that air is rising along the center of a vortex, and descending around the outer periphery, producing the 5-μm bright rings. Observationally, we constrain the maximum radius of these rings to be less than twice the local Rossby deformation radius, L_R. If the radius of the visible oval (i.e., the clouds that make the oval visible) is >3000 km, our observations suggest that the descending part of the secondary circulation must be within these ovals. For the Red Oval BA, we postulate that the return flow is at the location of its red annulus, which has a radius of ∼3000 km.We develop a theory for the secondary circulation, where air is (baroclinically) rising along the center of a vortex in a subadiabatic atmosphere, and descending at a distance not exceeding ∼2× the local Rossby deformation radius. Using this model, we find a timescale for mixing throughout the vortex of order several months, which suggests that the chromophores that are responsible for the red color of Oval BA’s red annulus must be produced locally, at the location of the annulus. This production most likely results from the adiabatic heating in the descending part of the secondary circulation. Such higher-than-ambient temperature causes NH₃–ice to sublime, which will expose the condensation nuclei, such as the red chromophores.     

The impact of organic pollution on the macrobenthic fauna of Dubai Creek (UAE)

Dubai Creek is a tidal marine intrusion bisecting Dubai within the United Arab Emirates (UAE). The creek extends 14km inland from its opening into the Arabian Gulf, with a narrow lower creek channel leading to a lagoon section in the upper creek. The creek contains numerous sources of organic pollution including sewage outlet flows and boat waste. A survey of the creek was performed, assessing organic pollution, water properties, and the benthic macrofaunal community. The upper creek was heavily polluted with macrofauna communities commonly associated with organic pollution and eutrophication, while the lower creek contained low pollution and relatively healthy macrofauna communities. There is little net tidal flow of water within the creek and residence time in the lagoon is high, which may account for the high organic pollution levels. However, some evidence of the pollution effect moving into the lower creek was found. The results are considered in light of current and historic organic loading within the creek and future developments in the area.     

Identification and characterization of secondary minerals formed in tungsten mine tailings using transmission electron microscopy

Secondary minerals formed in tailings derived from a W-rich deposit were investigated in detail using transmission electron microscopy (TEM). The study focused on secondary minerals that formed in the vicinity of oxidized sphalerite [ZnS] and tennantite [Cu₁₀(Fe,Zn)₂As₄S₁₃] grains. Samples for TEM analysis were prepared directly from petrographic thin sections using a focused ion beam instrument. This method insured that spatial relationships among primary grains, secondary minerals and the pore spaces were maintained. The results from this study indicate that the secondary coatings associated with sphalerite and tennantite are composed of several discrete phases. The phases identified in this study include an Fe–Zn–As–O phase, secondary sulfides, native Cu, an Fe–Si–O phase, an In–O phase, and wulfenite [PbMoO₄]. The Fe–Zn–As–O phase precipitates directly from the pore water and the nearby primary mineral grains act as a source for some of the elements (e.g., Zn from sphalerite, As from tennantite). Secondary Cu sulfides were found at the outer margins of sphalerite and roquesite [CuInS₂] grains. It is likely that these Cu sulfides form as a result of interactions between the primary grain and aqueous Cu(II) present in the pore water, similar to what occurs in supergene environments. A secondary sulfide that was composed of variable amounts of Cu, Zn, As, Fe and S was also identified along the outer margins of tennantite. Native Cu was found in association with chalcopyrite [CuFeS₂] inclusions that were present in one of the sphalerite grains and probably represents a low-temperature secondary phase. The oxidation of chalcopyrite in the presence of aqueous Si leads to the formation of a nanocrystalline or amorphous Fe–Si–O phase. Roquesite oxidation leads to the formation of a crystalline In–O phase, which is likely dzhalindite [In(OH)₃]. Wulfenite was found in the interstitial voids present in the Fe–Zn–As–O phase suggesting that it forms by direct precipitation from the local pore water. The results from this study indicate that secondary coatings consist of complex secondary phases that may only be distinguished at the nanoscale. The TEM investigations reveal details regarding mineralogical sinks and sources for aqueous components that may otherwise be overlooked.     

Spatial assessment of salinity and nitrate pollution in Amman Zarqa Basin: a case study

Intensive use of land resources in arid and semi-arid regions exert serious pressures on groundwater resources and jeopardize further socio-economical developments. The Amman-Zarqa Basin (AZB), the most vital basin in Jordan, is facing recent groundwater deterioration due to a very large increase in water demands for domestic, agricultural, and industrial uses. The objectives of this paper were to quantify the degree of contamination in the basin by evaluating the characteristics, distribution and seasonal variations of two pollution indicators (nitrate concentration and salinity) and to determine the impacts of human activities (land use) on groundwater quality. Based upon long-term data (1970–2005) of groundwater samples collected from 538 wells across the AZB, spatial analyses indicated that both indicators have a strong spatial dependence and are anisotropically distributed. Prediction maps of Ordinary Kriging and Indicator Kriging provided detailed indications of the major and minor sources of pollution in the basin. Inefficient wastewater treatment plants, industrial activities and agricultural practices were responsible for 91, 85, and 25% salinization of nearby wells, respectively. Nitrate pollution had reached 73% above threshold (50 mg/L) in some cases. The temporal analyses estimated the salinity buildup rate to be around 8 × 10⁻² μS/cm per day, while nitrate buildup rate was estimated to be around 6 × 10⁻² mg/L per day. Remote sensing and spatial analyses helped greatly in groundwater quality assessment not only in providing the environmental status of the AZB but also in delineating the potential of contamination risk zones and their correlation to human activities. Furthermore, the paper suggests some environmental protection strategies that should be adopted to protect the vital groundwater resources of the basin from further deterioration.     

Improving Short- and Long-term Stability of Underground Gypsum Mine Using Partial and Total Backfill

The stability of underground mines represents a key issue for active and abandoned mines. Over the last few years, several collapses of underground mines in France have affected existing buildings and infrastructures. Many factors are generally identified as the cause of failures: pillar ageing, fractures, and pillars’ height to width ratio, etc. Among the treatment techniques available to prevent instability and reduce the deterioration of pillars, backfill is the most frequently used. A research programme, supported by the French Ministry of the Environment, was developed to study the operability of partial and total backfill using waste material in the Livry-Gargan gypsum mine (near Paris, France), where pillar height is 17 m. The paper focuses on: (1) the characterisation of the gypsum and fill material (laboratory and in situ tests), (2) the in situ measurements, involving 5 pillars equipped with 19 pressure cells, since 1999, (3) and numerical modelling of fractured pillars performed in order to improve understanding of the effects of backfill on the stability of room-and-pillar mines. The study clearly shows the operability and the advantages of partial and total backfill for short-term pillar stability. The induced horizontal pressure generated by backfill can reach 200 kPa. The use of numerical modelling also shows the effect of backfill on fractures and that backfill reduces indicatively the shear displacement and the opening of fractures. Numerical modelling helps in identifying the mechanisms of backfill and in a better understanding of the behaviour of backfilled mines.     

High‐frequency streamflow acquisition and bed level/flow angle estimates in a mountainous river using shallow‐water acoustic tomography

The acquisition of reliable discharge estimates is crucial in hydrological studies. This study demonstrates a promising acoustic method for measuring streamflow at high sampling rate for a long period using the fluvial acoustic tomography system (FATS). The FATS recently emerged as an innovative technique for continuous measurements of streamflow. In contrast to the traditional point/transect measurements of discharge, the FATS enables the depth‐averaged and range‐averaged flow velocity along the ray path to be measured in a fraction of a second. The field test was conducted in a shallow gravel‐bed river (0.9 m deep under low‐flow conditions, 115 m wide) for 1 month. The parameters (stream direction and bottom elevation) required for calculating the streamflow were deduced by a nonlinear regression to the discharge data from the well‐established rating curve. The cross‐sectional average velocities were automatically calculated from the acoustic data, which were collected on both riverbanks every 30 s. The FATS was connected to the internet so that the real‐time flow data could be obtained. The FATS captured discharge variations at a cut‐off frequency of approximately 70 day^?1. The stream exhibited temporal discharge changes at multiple time scales ranging from a few tens of minutes to days. Copyright © 2016 John Wiley & Sons, Ltd.