Organic carbon isotope ratios in Quaternary cores from the Gulf of Mexico

All of the major deep-water sedimentary provinces of the Gulf of Mexico were sampled with 48 piston cores, representative of the late Quaternary. The amount (per cent) and δ5C¹³ of the organic carbon in the sediment was measured at intervals within each core.Graphs of δC¹³ versus depth for each core give an indication of the sedimentological history of the Gulf. They show the extent of terrestrial influence on the Gulf during the late Pleistocene.Changes in δC¹³ of up to 6.0%.(from ~ ?19%.to ?25%. vs NBS-20) were measured across the Pleistocene-Holocene boundary in cores from the abyssal plain. These changes are consistent with a model wherein varying amounts of land-derived organic carbon were transported to the Gulf basin during glacial periods.By comparing graphs for cores from different areas, it was concluded that the major parameter affecting the δC¹³ values of organic carbon from marine sediments is the relative amount of terrestrial material present in the sediment. The maximum possible effect of the Pleistocene-Holocene temperature change in the Gulf was determined to be ~1.0%, if such an effect occurs at all.     

Challenges in global ballast water management

Ballast water management is a complex issue raising the challenge of merging international regulations, ship's specific configurations along with ecological conservation. This complexity is illustrated in this paper by considering ballast water volume, discharge frequency, ship safety and operational issues aligned with regional characteristics to address ecological risk for selected routes. A re-estimation of ballast water volumes gives a global annual level of 3500 Mton. Global ballast water volume discharged into open sea originating from ballast water exchange operations is estimated to approximately 2800 Mton. Risk based decision support systems coupled to databases for different ports and invasive species characteristics and distributions can allow for differentiated treatment levels while maintaining low risk levels. On certain routes, the risk is estimated to be unacceptable and some kind of ballast water treatment or management should be applied.     

Corrections for Wind-Speed Errors from Sodar and Lidar in Complex Terrain

The quality of lidar and sodar wind estimates is generally judged through comparisons with mast-mounted instruments, and the resulting regressions. Evaluation of the relative merits of lidars versus sodars is complicated by the fact that lidars are generally placed close to a mast whereas sodars are generally placed some distance from a mast so that acoustic reflections off the mast are reduced. This leads to the two technologies, lidar and sodar, not being compared in similar situations. Differences arising from the two geometries can be expected to be larger in complex terrain, where the wind regime can vary significantly spatially. The current work explores these differences in moderately complex terrain. Lidar–mast comparisons are performed with the lidar close to an 80 m mast, and sodar–mast comparisons performed with the sodar 300 m from the mast. Systematic variations in estimated wind speed are found to occur with height, consistent with predictions from a simple flow model. When the lidar was moved to the sodar location, further from the mast, there were significant changes in the estimated wind speeds and a reduction in correlation with the mast-based wind speeds, as expected. However, the correlation between collocated lidar and sodar winds was high. This finding emphasizes that any comparison of two remote sensing instruments needs to be through similar experiments, and that differences in accuracy often reported for the lidar and sodar technologies are likely to be contaminated due to poor comparison configurations. A method was devised to simulate the sodar being collocated with the mast, by using the lidar–sodar measurements and the lidar–mast measurements. It was found that there was then no statistically detectable difference between lidar–mast regressions and sodar–mast regressions for the particular lidar and sodar tested. Both remote sensing instruments were also found to be good estimators of Weibull parameters, as compared with those derived from mast data. The conclusion is that the sodar measured the winds above the sodar with a similar accuracy to the lidar measuring winds above the lidar.     

Water diffusion in Mount Changbai peralkaline rhyolitic melt

Diffusion couple experiments with wet half (up to 4.6 wt%) and dry half were carried out at 789–1,516 K and 0.47–1.42 GPa to investigate water diffusion in a peralkaline rhyolitic melt with major oxide concentrations matching Mount Changbai rhyolite. Combining data from this work and a related study, total water diffusivity in peralkaline rhyolitic melt can be expressed as:

$ D_{{{\text{H}}_{ 2} {\text{O}}_{\text{t}} }} = D_{{{\text{H}}_{ 2} {\text{O}}_{\text{m}} }} \left( {1 - \frac{0.5 - X}{{\sqrt {[4\exp (3110/T - 1.876) - 1](X - X^{2} ) + 0.25} }}} \right), $

$ {\text{with}}\;D_{{{\text{H}}_{ 2} {\text{O}}_{\text{m}} }} = \exp \left[ { - 1 2. 7 8 9- \frac{13939}{T} - 1229.6\frac{P}{T} + ( - 27.867 + \frac{60559}{T})X} \right], $

where D is in m² s^?1, T is the temperature in K, P is the pressure in GPa, and X is the mole fraction of water and calculated as X = (C/18.015)/(C/18.015 + (100 ? C)/33.14), where C is water content in wt%. We recommend this equation in modeling bubble growth and volcanic eruption dynamics in peralkaline rhyolitic eruptions, such as the ~1,000-ad eruption of Mount Changbai in North East China. Water diffusivities in peralkaline and metaluminous rhyolitic melts are comparable within a factor of 2, in contrast with the 1.0–2.6 orders of magnitude difference in viscosities. The decoupling of diffusivity of neutral molecular species from melt viscosity, i.e., the deviation from the inversely proportional relationship predicted by the Stokes–Einstein equation, might be attributed to the small size of H₂O molecules. With distinct viscosities but similar diffusivity, bubble growth controlled by diffusion in peralkaline and metaluminous rhyolitic melts follows similar parabolic curves. However, at low confining pressure or low water content, viscosity plays a larger role and bubble growth rate in peralkaline rhyolitic melt is much faster than that in metaluminous rhyolite.

     

Diffusive transport of water in porous feldspars from granitic saprolites: In situ experiments using FTIR spectroscopy

A novel experimental cell was developed for in situ measurements of transport phenomena in porous media using Fourier-Transform Infrared (FTIR) Spectroscopy. The technique was employed at ambient pressure in the temperatures range of 11–44 °C to study the H₂O → D₂O exchange between water-saturated weathered feldspars (bulk porosity of 5–19 vol% for feldspar) from granitic saprolites and a surrounding aqueous liquid. Such measurements are an important step for understanding internal weathering reactions of feldspars in soils and aquifers. Effective diffusion coefficients D_eff for water in water-saturated porous feldspars were determined assuming one-dimensional diffusion in a quasi-homogeneous medium. The values of D_eff vary from 7.2 × 10⁻¹⁰ to 1.9 × 10⁻¹¹ m²/s and are 1–2 orders of magnitude lower than the diffusion coefficients (D) of protons and molecular H₂O in liquid water. The activation energy for the H₂O → D₂O exchange process in porous feldspars ranges from 7.8 to 18.8 kJ/mol.The results imply that the effective diffusivity of water is mainly controlled by physical properties of the feldspars like porosity, pore connectivity, pore geometry and distribution. Perthitic feldspars with homogeneous pore distribution in the albitic lamellas have diffusional tortuosity factors X = D/D_eff between 3 and 10 while alkali feldspars with inhomogeneously distributed and disconnected pores have much higher X values up to 129. Diffusion anisotropy has been verified for a vein perthite with diffusion perpendicular to the lamellas being faster by 0.3–0.5 log units than within the lamellas. It has to be emphasized that the study is based only on few selected feldspars, including perthitic feldspar, and additional work on samples with different weathering stages is needed to test the importance of the different parameters controlling diffusive transport in the pore system.     

Water diffusion in dacitic melt

H₂O diffusion in dacitic melt was investigated at 0.48-0.95 GPa and 786-893 K in a piston-cylinder apparatus. The diffusion couple design was used, in which a nominally dry dacitic glass makes one half and is juxtaposed with a hydrous dacitic glass containing up to ∼8 wt.% total water (H₂O_t). H₂O concentration profiles were measured on quenched glasses with infrared microspectroscopy. The H₂O diffusivity in dacite increases rapidly with water content under experimental conditions, similar to previous measurements at the same temperature but at pressure <0.15 GPa. However, compared with the low-pressure data, H₂O diffusion at high pressure is systematically slower. H₂O diffusion profiles in dacite can be modeled by assuming molecular H₂O (H₂O_m) is the diffusing species. Total H₂O diffusivity D_H2Ot within 786-1798 K, 0-1 GPa, and 0-8 wt.% H₂O_t can be expressed as: where D_H2Ot is in m²/s, T is temperature in K, P is pressure in GPa, K = exp(1.49 − 2634/T) is the equilibrium constant of speciation reaction (H₂O_m+O?2OH) in the melt, X = C/18.015/[C/18.015 + (100 − C)/33.82], C is wt.% of H₂O_t, and 18.015 and 33.82 g/mol correspond to the molar masses of H₂O and anhydrous dacite on a single oxygen basis. Compared to H₂O diffusion in rhyolite, diffusivity in dacite is lower at intermediate temperatures but higher at superliquidus temperatures. This general H₂O diffusivity expression can be applied to a broad range of geological conditions, including both magma chamber processes and volcanic eruption dynamics from conduit to the surface.     

Pressure dependence of viscosity of rhyolitic melts

Viscosity of silicate melts is a critical property for understanding volcanic and igneous processes in the Earth. We investigate the pressure effect on the viscosity of rhyolitic melts using two methods: indirect viscosity inference from hydrous species reaction in melts using a piston cylinder at pressures up to 2.8 GPa and direct viscosity measurement by parallel-plate creep viscometer in an internally-heated pressure vessel at pressures up to 0.4 GPa. Comparison of viscosities of a rhyolitic melt with 0.8 wt% water at 0.4 GPa shows that both methods give consistent results. In the indirect method, viscosities of hydrous rhyolitic melts were inferred based on the kinetics of hydrous species reaction in the melt upon cooling (i.e., the equivalence of rheologically defined glass transition temperature and chemically defined apparent equilibrium temperature). The cooling experiments were carried out in a piston-cylinder apparatus using hydrous rhyolitic samples with 0.8-4 wt% water. Cooling rates of the kinetic experiments varied from 0.1 K/s to 100 K/s; hence the range of viscosity inferred from this method covers 3 orders of magnitude. The data from this method show that viscosity increases with increasing pressure from 1 GPa to 3 GPa for hydrous rhyolitic melts with water content ?0.8 wt% in the high viscosity range. We also measured viscosity of rhyolitic melt with 0.13 wt% water using the parallel-plate viscometer at pressures 0.2 and 0.4 GPa in an internally-heated pressure vessel. The data show that viscosity of rhyolitic melt with 0.13 wt% water decreases with increasing pressure. Combining our new data with literature data, we develop a viscosity model of rhyolitic melts as a function of temperature, pressure and water content.     

Meltwater discharge during the Holocene from the Wilkes subglacial basin revealed by beryllium isotope analysis of marine sediments

Understanding Antarctic Ice Sheet dynamics related to global climate change is of scientific and societal interest as the future behaviour of the ice sheet under the currently changing climate is unknown. We present beryllium‐10 (¹⁰Be) analysis of a high‐resolution marine sediment core from the Adélie Basin near the eastern Wilkes Land margin, which is susceptible to marine ice sheet instability due to the low‐lying nature and down‐sloping trough of the Wilkes Subglacial Basin. Combined with a newly constructed age model using compound specific radiocarbon dates, the data reveal three events associated with high meteoric ¹⁰Be at ca. ~10 ka, ca. ~6.5 ka and from ca. ~4 ka. We interpret these high meteoric ¹⁰Be events to be derived from the deposition of ¹⁰Be released from the ice sheet during meltwater discharge. In particular, the shift to higher meteoric ¹⁰Be concentration at~4 ka may correspond to changes in climate patterns at this time. Copyright © 2019 John Wiley & Sons, Ltd.