The pelagic community of a gravel pit lake: Significance of Coleps hirtus viridis (Prostomatida) and its role as a scavenger

Coleps hirtus viridis was the dominant species of the planktonic ciliate community of Lake Fühlinger See (Germany) during the study in 1999 and 2000. Total ciliate densities ranged from 120 to 42,000 ind. l⁻¹ in 1999 and up to 8,000 ind. l⁻¹ in 2000. Coleps contributed up to 98% to both total ciliate abundance and biomass and made up an average of 64% of the total ciliate biomass. Oligotrichs (Rimostrombidium, Strobilidium) dominated the epilimnetic zone, whereas peritrich ciliates (Pelagovorticella, Vorticella) were predominantly located in the hypolimnion. The population maximum of Coleps changed locations from the epilimnion in early summer to the hypolimnion (up to 40,000 ind. l⁻¹) during stratification. High growth rates in the hypolimnion, presence of endosymbiontic algae and the ability to ingest detritus seem to be important for the success.Growth rates of Coleps in June were determined by Landry-Hassett dilution experiments in both the epilimnion and the hypolimnion. The instantaneous growth rates were similar in both layers (0.6 d⁻¹), but a distinctly higher instantaneous mortality was estimated for the epilimnion. These high loss rates may be due to grazing pressure by cladocerans.The significance of the histophagous feeding of Coleps was evaluated through an experiment using killed zooplankton. Parts of Daphnia magna were incorporated at rates of about 1,100 μm³ ind.⁻¹ h⁻¹ by Coleps without endosymbiotic algae and at rates of 500 μm³ ind.⁻¹ h⁻¹ by Coleps with endosymbionts. These high feeding rates support the conclusion that Coleps can use dead organic matter as an additional food source.     

Ambiguous Moment Tensors and Radiation Patterns in Anisotropic Media with Applications to the Modeling of Earthquake Mechanisms in W-Bohemia

Anisotropic material properties are usually neglected during inversions for source parameters of earthquakes. In general anisotropic media, however, moment tensors for pure-shear sources can exhibit significant non-double-couple components. Such effects may be erroneously interpreted as an indication for volumetric changes at the source. Here we investigate effects of anisotropy on seismic moment tensors and radiation patterns for pure-shear and tensile-type sources. Anisotropy can significantly influence the interpretation of the source mechanisms. For example, the orientation of the slip within the fault plane may affect the total seismic moment. Also, moment tensors due to pure-shear and tensile faulting can have similar characteristics depending on the orientation of the elastic tensor. Furthermore, the tensile nature of an earthquake can be obscured by near-source anisotropic properties. As an application, we consider effects of inhomogeneous anisotropic properties on the seismic moment tensor and the radiation patterns of a selected type of micro-earthquakes observed in W-Bohemia. The combined effects of near-source and along-path anisotropy cause characteristic amplitude distortions of the P, S1 and S2 waves. However, the modeling suggests that neither homogeneous nor inhomogeneous anisotropic properties alone can explain the observed large non-double-couple components.The results also indicate that a correct analysis of the source mechanism, in principle, is achievable by application of anisotropic moment tensor inversion.     

Maximum Storm Surge Curve Due to Global Warming for the European North Sea Region During the 20th–21st Century

Computations of storm surges during the 20th century needs to incorporate globalwarming of about 0.6 °C ± 0.2 °C (IPCC, 2001). In order totake this global warming into consideration, the development of all storm surgesoccurred during the 20th century have been analysed. The study comprises determiningto what degree the storm surge curve and storm surge level depend on each other. Thisfact can be used to calculate a maximum storm surge curve and each single storm surgeevent can be summarised. The tendency of the surge and wind parameters do not showthat this maximum storm surge levels in the 20th century will occur earlier than predicted, however, the global warming of 0.6 °C will extend the duration of the mean storm surge curve.     

On the variability of the flow along the Meso-American Barrier Reef system: a numerical model study of the influence of the Caribbean current and eddies

A high resolution (3–8 km grid), 3D numerical ocean model of the West Caribbean Sea (WCS) is used to investigate the variability and the forcing of flows near the Meso-American Barrier Reef System (MBRS) which runs along the coasts of Mexico, Belize, Guatemala and Honduras. Mesoscale variations in velocity and temperature along the reef were found in seasonal model simulations and in observations; these variations are associated with meandering of the Caribbean current (CC) and the propagation of Caribbean eddies. Diagnostic calculations and a simple assimilation technique are combined to infer the dynamically adjusted flow associated with particular eddies. The results demonstrate that when a cyclonic eddy (negative sea surface height anomaly (SSHA)) is found near the MBRS the CC shifts offshore, the cyclonic circulation in the Gulf of Honduras (GOH) intensifies, and a strong southward flow results along the reef. However, when an anticyclonic eddy (positive SSHA) is found near the reef, the CC moves onshore and the flow is predominantly westward across the reef. The model results help to explain how drifters are able to propagate in a direction opposite to the mean circulation when eddies cause a reversal of the coastal circulation. The effect of including the Meso-American Lagoon west of the Belize Reef in the model topography was also investigated, to show the importance of having accurate coastal topography in determining the variations of transports across the MBRS. The variations found in transports across the MBRS (on seasonal and mesoscale time scales) may have important consequences for biological activities along the reef such as spawning aggregations; better understanding the nature of these variations will help ongoing efforts in coral reef conservation and maintaining the health of the ecosystem in the region.     

The lower marine to lower freshwater Molasse transition in the northern Alpine foreland basin (Oligocene; central Switzerland–south Germany): age and geodynamic implications

The Wilhelmine Alpe section near Immenstadt (Allgäu, south Germany), which represents one of the best continuously exposed outcrops within the northern Alpine foreland basin, has been analyzed for magnetostratigraphic and palynostratigraphic signals. The section comprises the marine-to-terrestrial transition from Lower Marine (UMM) to Lower Freshwater Molasse (USM) sediments. Based on the correlation of the local magnetic pattern with the geomagnetic polarity timescale (GPTS) and palynostratigraphic data, an age of about 31 Ma is suggested for the UMM–USM transition in the Wilhelmine Alpe section. A comparison with coeval magnetostratigraphic sections from central and eastern Switzerland indicates that the regression of the UMM sea along the southern margin of the Molasse basin occurred strongly heterochronously between 31.5 and 30 Ma. The heterochroneity is attributed to the deposition of fan-delta and alluvial fan sediments which document that the overall marine conditions during the UMM were accompanied by strong clastic input derived from the rising Alps. This clastic contribution had a much stronger influence on the depositional pattern than previously thought.     

9: Processes of tectonism, magmatism and mineralization: Lessons from Europe

Metallogenic provinces in Europe range in age from the Archaean to the Neogene. Deposit types include porphyry copper and epithermal Cu–Au, volcanic-hosted massive sulphide (VMS), orogenic gold, Fe-oxide–Cu–Au, anorthosite Fe–Ti-oxide and sediment-hosted base-metal deposits. Most of them formed during short-lived magmatic events in a wide range of tectonic settings; many can be related to specific tectonic processes such as subduction, hinge retreat, accretion of island arcs, continental collision, lithosphere delamination or slab tear. In contrast, most sediment-hosted deposits in Europe evolved in extensional, continental settings over significant periods of time. In Europe, as elsewhere, ore formation is an integral part of the geodynamic evolution of the Earth's crust and mantle. Many tectonic settings create conditions conducive to the generation of water-rich magma, but the generation of ore deposits appears to be restricted to locations and short periods of change in temperature and stress, imposed by transitory plate motions. Crustal influence is evident in the strong structural controls on the location and morphology of many ore deposits in Europe. Crustal-scale fault–fracture systems, many involving strike-slip elements, have provided the fabric for major plumbing systems. Rapid uplift, as in metamorphic core complexes, and hydraulic fracturing can generate or focus magmatic–hydrothermal fluid flow that may be active for time spans significantly less than a million years. Once a hydrologically stable flow is established, ore formation is strongly dependent on the steep temperature and pressure gradients experienced by the fluid, particularly within the upper crust. In Europe, significant fracture porosity deep in the crystalline basement (1%) is not only important for magmatic–hydrothermal systems, but allows brines to circulate down through sedimentary basins and then episodically upward, expelled seismically to produce sediment-hosted base-metal deposits and Kupferschiefer copper deposits. Emerging research, stimulated by GEODE, can improve the predicting power of numerical simulations of ore-forming processes and help discover the presence of orebodies beneath barren overburden.     

GPS monitoring of vertical ground motion in northern Ardenne–Eifel: five campaigns (1999–2003) of the HARD project

We present the HARD project of GPS monitoring of vertical ground motion in NE Ardenne and Eifel (western Europe). Its main purposes are to get a better insight into the present-day rates of vertical ground motion in intraplate settings and to identify the various causes of these motions. Since 1999, we have carried out yearly campaigns of simultaneous GPS measurements at 12 sites situated so as to sample the different tectonic subunits of the study area and especially to record potential displacements across the seismogenic Hockai fault zone. Five campaigns (1999–2003) have been processed currently. Key issues of the data processing with the Gamit software are discussed and first results are presented. Though temporally consistent in many cases, the obtained vertical motion rates are spatially highly variable. They are also much too high (several mm/year) to support a tectonic interpretation, and a long-term influence of groundwater level variations is proposed to account for the observed motions. This influence should be distinguished from seasonal variations and from inter-survey variations linked to the varying degree of soil and subsoil drying off during the successive spring surveys.     

Facies distribution and dissolution depths of surface sediment components from the Vema channel and the Rio Grande rise (southwest Atlantic Ocean)

Surface sediments from the Vema channel and from the Rio Grande rise (western extremity) contain less calcareous fossils with increasing water depth. The pteropodal (aragonite) lysocline corresponds to the 3200-m isobath. The pteropodal compensation depth is found above the lower boundary of the North Atlantic Deep Water: 3500 m. The planktonic foraminiferal lysocline (4050 m) seems to be very close to the abyssal thermocline and is therefore here the upper limit of the Antarctic Bottom Water. The foraminiferal and the coccolith compensation depths seem to coincide: 4500 m. Distribution and dissolution of calcareous sediment components are the same all around the western extremity of the Rio Grande rise (southern, western and northern flanks).