Woody buffer effects on water temperature: The role of spatial configuration and daily temperature fluctuations

Water temperature is a key driver for riverine biota and strongly depends on shading by woody riparian vegetation in summer. While the general effects of shading on daily maximum water temperature T_max are well understood, knowledge gaps on the role of the spatial configuration still exist. In this study, the effect of riparian buffer length, width, and canopy cover (percentage of buffer area covered by woody vegetation) on T_max was investigated during summer baseflow using data measured in seven small lowland streams in western Germany (wetted width 0.8–3.7 m). The effect of buffer length on T_max differed between downstream cooling and heating: T_max approached cooler equilibrium conditions after a distance of 0.4 km (~45 min travel-time) downstream of a sharp increase in canopy cover. In contrast, T_max continued to rise downstream of a sharp decrease in canopy cover along the whole 1.6 km stream length investigated. The effect of woody vegetation on T_max depended on buffer width, with changes in canopy cover in a 10 m wide buffer being a better predictor for changes in T_max compared to a 30 m buffer. The effect of woody vegetation on T_max was linearly related to canopy cover but also depended on daily temperature range T_range, which itself was governed by cloudiness, upstream canopy cover, and season. The derived empirical relationship indicated that T_max was reduced by −4.6°C and increased by +2.7°C downstream of a change from unshaded to fully shaded conditions and vice versa. This maximum effect was predicted for a 10 m wide buffer at sunny days in early summer, in streams with large diel fluctuations (large T_range). Therefore, even narrow woody riparian buffers may substantially reduce the increase in T_max due to climate change, especially in small shallow headwater streams with low baseflow discharge and large daily temperature fluctuations.     

Effectiveness of different types of block ramps for fish upstream movement

Rivers are worldwide highly fragmented due to human impacts. This fragmentation has a negative effect on fish movement and dispersal. Many artificial barriers such as river bed sills and small weirs are nowadays replaced by block ramps in order to reestablish longitudinal connectivity for fish in rivers and streams. We studied the upstream passage of several fish species on different types of block ramps with slopes between 3.6 and 13.4 %. We conducted translocation experiments in the field based on mark-recapture and on the use of PIT-tags. Temporal movement patterns were observed by an instream antenna. Hydraulic and morphological characteristics of block ramps were measured and compared with fish passage efficiency. Our results clearly showed that upstream passage efficiency differs between fish species, size classes and block ramps. We observed that brown trout (Salmo trutta fario) performed better than bullhead (Cottus gobio) and several cyprinid species on the same block ramps. Passage efficiency of brown trout and chub (Leuciscus cephalus) was size-selective, with small-sized individuals being less successful. For brown trout, size-selectivity became more relevant with increasing slope of ramp. We conclude that block ramps with slopes of >5 % are ineffective for the small-sized cyprinid species and that vertical drops within step-pool ramps can hinder successful upstream passage of bullhead.     

Anomalous DS-variation in equatorial latitudes during geomagnetic storms

For several storms the asymmetry of the magnetic disturbance values at equatorial latitudes has been investigated. Asymmetries were found for which the maximum and minimum depressions of the horizontal intensity occur at midnight and at noon, respectively, (anomalous DS-variation); other asymmetries, where the maximum and minimum depressions were observed in the morning and in the evening, respectively (inverse DS-variation). The DS-variation at equatorial latitudes was discussed in connection with the polar magnetic substorm and the D_st-variation.     

Full scale wake and boundary layer instrumentation feasibility study

Fluid-flow measuring devices intended for full scale use were designed and tested. One device consisted of a rake supporting different types of pitot tubes. This will be used to obtain a velocity profile of the boundary layer of a test ship. The other device was a five-hole pitot tube that was used in a wake survey. The pressure transport medium (i.e. the medium that carried the pressure signal from the pitot tube to the pressure transducer) was air instead of water. This proved to be successful, as the results indicate.     

Gorgan Bay:a microcosm for study on macrobenthos species-environment relationships in the southeastern Caspian Sea

The relationship between spatial patterns of macrobenthos community characteristics and environmental conditions(salinity, temperature, dissolved oxygen, organic matter content, sand, silt and clay) was investigated throughout the Gorgan Bay in June 2010. Principal components analysis(PCA) based on environmental data separated eastern and western stations. The maximum(4500 ind./m²) and minimum(411 ind./m²) densities were observed at Stas 1 and 6, respectively. Polychaeta was the major group and Streblospio gynobranchiata was dominant species in the bay. According to Distance Based Linear Models results, macrofaunal total density was correlated with silt percentage and salinity and these two factors explaining 64% of the variability while macrofaunal community structure just correlated with salinity(22% total variation). In general, western part of the bay showed the highest number of species and biodiversity while, the highest density was found at Sta. 1 and in the middle part of the bay. Furthermore, relationship between diversity indices and macrobenthic species with measured factors is also discussed. Our results confirm the effect of salinity as an important factor on distribution of macrobenthic fauna in south Caspian brackish waters.     

Concentration of Ciprofloxacin in Brazilian Hospital Effluent and Preliminary Risk Assessment: A Case Study

This study was carried out to evaluate the occurrence of the fluoroquinolone antimicrobial agent ciprofloxacin (CIP) in the effluent of the Hospital of the Federal University of Santa Maria (HUSM). Measured environmental concentrations (MECs) of CIP in the hospital wastewater, both before (P1) and after (P2) cesspit/filter system treatment (CFTS), were determined by means of solid phase extraction and reversed‐phase liquid chromatography with fluorescence detection (LC‐FLD) and reversed‐phase liquid chromatography with mass spectrometric detection (LC‐MS/MS). The MECs (n = 7 daily composed samples) were 19 to 155 μg L^–1 (average: 54 ± 21 μg L^–1) and 32 to 99 μg L^–1 (average: 65 ± 45 μg L^–1) in P1 and P2, respectively. No relevant removal was observed from P1 to P2. In a worst case scenario, the final effluent was regarded as MECs of surface water. These MECs were generally 5 to 20,000‐fold higher than what was previously known. If the present data is drawn on to form a model of the situation in developing countries, the picture provides a first rough indication that the environmental risk associated with the use and emission of pharmaceuticals into the environment in developing countries might be higher than in developed countries.     

Comparison of Large-Eddy Simulation Data with Spatially Averaged Measurements Obtained by Acoustic Tomography – Presuppositions and First Results

An attempt is made to compare results oflarge-eddy simulation (LES) in a convective boundarylayer using the model PALM with experimental data obtained from acoustic travel time tomography.This method provides two-dimensional data arrays, which are considered as more suitable forLES-validation than classical local orline-integrated measurements, because the tomographic data are area- or volume-averaged.For a quantitative comparison with experimental data in general, some prerequisites have to be considered: First of all, the initial and boundary conditions of the LES model have to be provided correctly by the experiment. Considering measurement errors, a sensitivity study was performed to investigate the influence of inaccurate initial and boundary conditions on the simulation results.This showed that for determining some boundary conditions, such as the surface temperature and the roughness length, high measurement accuracies are necessary, which are difficult to reach or which at least require considerable extra measurement efforts.The initial and boundary conditions provided by the Lindenberg experiment in 1999 turned out to be of insufficient accuracy to allow quantitative comparisons.However, a qualitative comparison was performed instead to investigate if the acoustic tomography method is a proper method for comparisons with LES models in general.It showed a good qualitative agreement with some quantitative differences. These differences can partly be explained by the sensitivity of the LES to initial and boundary conditions and by the limitations of the acoustic tomography.     

Organizing earth observation data inside a spatial data infrastructure

Scientists as well public institutions dealing with geospatial data often work with a large amount of heterogeneous data deriving from different sources. Without a well-defined, organized structure they face problems in finding and reusing existing data, and as consequence this may cause data inconsistency and storage problems. A catalog system based on the metadata of spatial data facilitates the management of large amount of data and offers service to retrieve, discover and exchange geographic data in an quick and easy fashion. Currently, most online catalogs are more focusing on the geographic data and there has been only few interests in catalogizing Earth observation data, in which in addition the acquisition information matters. This article presents an automatic metadata extraction approach that creates from different optical data deriving from various satellite missions of scientific interest (i.e. MODIS, LANDSAT, RapidEye, Suomi-NPP VIIRS, Sentinel-1A, Sentinel-2A) metadata information, based on an extended model of the standard ISO 19115. The XML schema ISO 19139-2 with the support of gridded and imagery information defined in ISO 19115-2 was examined, and based on the requirements of experts working in the research field of Earth observation the schema was extended. The XML schema ISO 19139-2 and its extension has been deployed as a new schema plugin in the spatial catalog Geonetwork Open Source in order to store all relevant metadata information about satellite data and the appropriate acquisition and processing information in an online catalog. A real-world scenario that is productively used in the EURAC research group institute for Applied Remote Sensing illustrates a workflow management for Earth observation data including data processing, metadata extraction, generation and distribution.