THE INFLUENCE OF SLOPE AND RAIN INTENSITY ON RUNOFF AND INFILTRATION / L'influence de l'inclinaison de terrain et de l'intensité de pluie sur l'écoulement et l'infiltration

Abstract

The design and construction of a special-purpose laboratory catchment and rainfall simulator is described. The equipment consists of a soil catchment area that can be inclined at various angles. Additional instrumentation then measures the flow of water across the surface of, and through, the soil bed. Precipitation is provided by a unit that simulates rainfall at particular rates with uniform distribution.

The equipment was used to examine infiltration, runoff and other hydrological properties of a number of soils under different rainfall intensities and with different catchment slopes. Correlations were obtained for these variables.     

Influence of rainfall on the deformation and stability of a slope in overconsolidated clays: a case study

The behaviour of an instrumented unstable slope in a profile of weathered overconsolidated clay has been analysed. Available field investigation data and laboratory tests were integrated in a coupled hydromechanical model of the slope. Particular attention was given to the unsaturated soil conditions above the water table and to the influence of the rainfall record. Recorded pore-water pressures helped to identify the hydrogeological conditions of the slope. The coupled model was used to compute slope deformations and the variation of safety with time. Actual rainfall records were also integrated into the analysis. Comparison of measurements and calculations illustrate the nature of the slope instability and the complex relationships between mechanical and hydraulic factors. Electronic Publication     

A SIMPLE SOIL MOISTURE INDEX TO FORECAST CROP YIELDS

Neutron probe soil moisture measurements obtained biweekly during the growing season between 1982 and 1991 from multiple depths under grass-covered plots at 17 Illinois Climate Network sites are used to forecast crop yields. A Soil Moisture Index (SMIX) that combines the effect of intensity, duration, and timing of drought or excessively wet conditions was computed by integrating the quantity of available soil moisture throughout the rooting zone over the growing season. Relationships between the SMIX values and crop yields are evaluated at county, regional, and statewide scales. Coefficients of determination (r ²) for relationships between the SMIX values and maize, soybeans, and hay yields at the statewide level are 0.88, 0.74, and 0.81, respectively, when the period of integration is terminated at the end of the growing season. This new soil index can be employed to forecast yields as early as 12 weeks before harvest for the state of Illinois. However, predictions with RMSE ≤ 10% of the mean yield can be achieved only for SMIX integration periods ending 5, 9, and 6 weeks before harvest for maize, soybeans, and hay, respectively. Nomograms are presented for using the relationships between the SMIX values and crop yields to forecast Illinois's major crops well before harvest.     

Accounting of water flows used in Russian economy and estimation of the water accumulated in exported products

An input–output model was applied to analyze the used freshwater and total used water in Russian economy sectors over 2005–2010. In addition, the sectors that are the main sources of wastewater discharge are identified and the volumes of water sent abroad with exported products are calculated based on data on 2011. The compiled scheme of intersectoral flows and water use in the country can be used as a base for water resources management.     

Flood seasonality across Scandinavia—Evidence of a shifting hydrograph?

Fluvial flood events have substantial impacts on humans, both socially and economically, as well as on ecosystems (e.g., hydroecology and pollutant transport). Concurrent with climate change, the seasonality of flooding in cold environments is expected to shift from a snowmelt‐dominated to a rainfall‐dominated flow regime. This would have profound impacts on water management strategies, that is, flood risk mitigation, drinking water supply, and hydro power. In addition, cold climate hydrological systems exhibit complex interactions with catchment properties and large‐scale climate fluctuations making the manifestation of changes difficult to detect and predict. Understanding a possible change in flood seasonality and defining related key drivers therefore is essential to mitigate risk and to keep management strategies viable under a changing climate. This study explores changes in flood seasonality across near‐natural catchments in Scandinavia using circular statistics and trend tests. Results indicate strong seasonality in flooding for snowmelt‐dominated catchments with a single peak occurring in spring and early summer (March through June), whereas flood peaks are more equally distributed throughout the year for catchments located close to the Atlantic coast and in the south of the study area. Flood seasonality has changed over the past century seen as decreasing trends in summer maximum daily flows and increasing winter and spring maximum daily flows with 5–35% of the catchments showing significant changes at the 5% significance level. Seasonal mean daily flows corroborate those findings with higher percentages (5–60%) of the catchments showing statistically significant changes. Alterations in annual flood occurrence also point towards a shift in flow regime from snowmelt‐dominated to rainfall‐dominated with consistent changes towards earlier timing of the flood peak (significant for 25% of the catchments). Regionally consistent patterns suggest a first‐order climate control as well as a local second‐order catchment control, which causes inter‐seasonal variability in the streamflow response.     

Geoelectric section of the Central Tien Shan: Sequential inversion of the magnetovariational and magnetotelluric data along the Naryn Line

The paper presents the results of 2D inversion of deep magnetotelluric (MT) and magnetovariational (MV) soundings along the Naryn Line. The method of partial (sequential) inversions is used. According to this method, at the first stage, magnetovariation responses are used for the localization of deep anomalies of electrical conductivity, and then the magnetotelluric sounding data are invoked to refine the structure of the host medium and the structural details in the upper part of the section. It is shown that this approach enables one to estimate the informativeness of separate components of the electromagnetic field, to reduce the distorting influence of the near-surface geoelectric inhomogeneities, and to increase the stability of the final solution of the inverse problem.     

Degradation and Detoxification of Chlorophenols in Continuous‐Flow Fixed‐Bed Aerobic Reactors

An indigenous bacterial strain of Delftia sp. capable of degrading 2,4‐dicholorophenol and an indigenous bacterial community that degrades 2,4,6‐trichlorophenol (TCP) were employed to inoculate continuous down‐flow fixed‐bed reactors. Continuous‐reactors were constructed from PVC employing hollow PVC cylinders as support material. Synthetic wastewater was prepared by dissolving the corresponding chlorophenol in non‐sterile groundwater. Biodegradation was evaluated by spectrophotometry, chloride release, GC, and microbial growth. Detoxification was evaluated by using Daphnia magna as test organism. Delftia sp. was able to remove an average of 95.6% of DCP. Efficiency in terms of chemical oxygen demand (COD) was of 88.9%. The indigenous bacterial community that degrades TCP reached an average efficiency of 96.5 and 91.6% in terms of compound and COD removal, respectively. In both cases stoichiometric removal of chloride and detoxification was achieved. When synthetic wastewater feed was cut off for 7 days, both reactors showed a fast recovery after inflow restarting, reaching average outlet concentration values within 36 h. The promising behavior of the microorganisms and the low cost of the reactors tested allow us to suggest their possible application to remediation processes.     

A multi-proxy record of the Last Glacial Maximum and last 14,500?years of paleoenvironmental change at Lone Spruce Pond, southwestern Alaska

Sediment cores from Lone Spruce Pond (60.007°N, 159.143°W), southwestern Alaska, record paleoenvironmental changes during the global Last Glacial Maximum (LGM), and during the last 14,500 calendar years BP (14.5?cal?ka). We analyzed the abundance of organic matter, biogenic silica, carbon, and nitrogen, and the isotope ratios of C and N, magnetic susceptibility, and grain-size distribution of bulk sediment, abundance of alder shrub (Alnus) pollen, and midge (Chironomidae and Chaoboridae) assemblages in a 4.7-m-long sediment sequence from the depocenter at 22?m water depth. The basal unit contains macrofossils dating to 25?C21?cal?ka (the global LGM), and is interpreted as glacial-lacustrine sediment. The open water requires that the outlet of the Ahklun Mountain ice cap had retreated to within 6?km of the range crest. In addition to cladocerans and diatoms, the glacial-lacustrine mud contains chironomids consistent with deep, oligotrophic conditions; several taxa associated with relatively warm conditions are present, suggestive of relative warmth during the global LGM. The glacial-lacustrine unit is separated from the overlying non-glacial lake sediment by a possible disconformity, which might record a readvance of glacier ice. Non-glacial sediment began accumulating around 14.5?cal?ka, with high flux of mineral matter and fluctuating physical and biological properties through the global deglacial period, including a reversal in biogenic-silica (BSi) content during the Younger Dryas (YD). During the global deglacial interval, the ??¹³C values of lake sediment were higher relative to other periods, consistent with low C:N ratios (8), and suggesting a dominant atmospheric CO₂ source of C for phytoplankton. Concentrations of aquatic faunal remains (chironomids and Cladocera) were low throughout the deglacial interval, diversity was low and warm-indicator taxa were absent. Higher production and air temperatures are inferred following the YD, when bulk organic-matter (OM) content (LOI 550?°C) increased substantially and permanently, from 10 to 30?%, a trend paralleled by an increase in C and N abundance, an increase in C:N ratio (to about 12), and a decrease in ??¹³C of sediment. Post-YD warming is marked by a rapid shift in the midge assemblage. Between 8.9 and 8.5?cal?ka, Alnus pollen tripled (25?C75?%), followed by the near-tripling of BSi (7?C19?%) by 8.2?cal?ka, and ??¹⁵N began a steady rise, reflecting the buildup of N and an increase in denitrification in soils. Several chironomid taxa indicative of relatively warm conditions were present throughout the Holocene. Quantitative chironomid-based temperature inferences are complicated by the expansion of Alnus and resulting changes in lake nutrient status and production; these changes were associated with an abrupt increase in cladoceran abundance and persistent shift in the chironomid assemblage. During the last 2,000?years, chironomid-assemblage changes suggest cooler temperatures, and BSi and OM values were generally lower than their maximum Holocene values, with minima during the seventh and eighth centuries, and again during the eighteenth century.     

The Arabian Plate: unique fit of the earth's surface jig saw puzzle

The Arabian Plate is important and unique in many ways. The worker wants to highlight the important features characterizing the Arabian Plate. It is a unique fit of the earth's surface jig saw puzzle, different than all other lithospheric plates. It has the three known main tectonic plate boundaries, divergent, convergent and conservative ones. These boundaries are the Red Sea and Gulf of Aden, Zagros-Taurus and Dead Sea, respectively. It has three main well-defined and sharp plate boundaries, and it is surrounded by three major plates, African, Eurasian and Indian plates. The Red Sea and Gulf of Aden form the divergent boundary and spreading center. The Dead Sea Transform Fault (the Gulf of Aqaba Transform Fault) represents the conservative boundary and transform fault system. The Zagros-Taurus Thrust (Zagros-Taurus-Bitlis Thrust and Fold Belt) represents the convergent boundary and collision zone. The Arabian Plate incorporates a wide range and variety and subvariety of all three rock types, igneous, metamorphic and sedimentary rocks, this in addition to all kinds of structures. Among these are folding with major fold belts, faulting, foliation, lineation and diapirism. Transform, transcurrent, normal, graben, reverse, thrust faults are all represented one way or another. The tectonics of the Arabian shield, which forms a major part of the Arabian Plate, has long tectonic history prior to the formation of the Red Sea. After the opening and formation of the latter, the tectonics of the Arabian shield became affected and controlled by its tectonics. The Arabian Plate includes the Arabian Platform which has a relatively different setting of tectonics represented by the Central Arabian Graben. The Arabian Plate contains one of the best representative outcropped ophiolite sequences in the world. The Arabian Plate most importantly incorporates most of world oil reserve. Seismic and volcanic activities are also manifested and affected many areas in the Arabian Plate.