Variability of soil moisture and its relationship with surface albedo and soil thermal parameters over the Loess Plateau

Data from July 2006 to June 2008 observed at SACOL(Semi-Arid Climate and Environment Observatory of Lanzhou University,35.946°N,104.137°E,elev.1961 m),a semi-arid site in Northwest China,are used to study seasonal variability of soil moisture,along with surface albedo and other soil thermal parameters, such as heat capacity,thermal conductivity and thermal diffusivity,and their relationships to soil moisture content.The results indicate that surface albedo decreases with increases in soil moisture content,s...     

Elemental characteristics and paleoenvironment reconstruction: a case study of the Triassic lacustrine Zhangjiatan oil shale,southern Ordos Basin,China

Using trace elements to reconstruct paleoenvironment is a current hot topic in geochemistry. Through analytical tests of oil yield, ash yield, calorific value, total sulfur, major elements, trace elements, and X-ray diffraction, the quality, mineral content, occurrence mode of elements, and paleoenvironment of the Zhangjiatan oil shale of the Triassic Yanchang Formation in the southern Ordos Basin were studied. The analyses revealed relatively high oil yield (average 6.63%) and medium quality. The mineral content in the oil shale was mainly clay minerals, quartz, feldspar, and pyrite; an illite–smectite mixed layer comprised the major proportion of clay minerals. Compared with marine oil shale in China, the Zhangjiatan oil shale had higher contents of quartz, feldspar, and clay minerals, and lower calcite content. Silica was mainly in quartz and Fe was associated with organic matter, which is different from marine oil shale. The form of calcium varied. Cluster analyses indicated that Fe, Cu, U, V, Zn, As, Cs, Cd, Mo, Ga, Pb, Co, Ni, Cr, Sc, P, and Mn are associated with organic matter while Ca, Na, Sr, Ba, Si, Zr, K, Al, B, Mg, and Ti are mostly terrigenous. Sr/Cu, Ba/Al, V/(V + Ni), U/Th, AU, and δU of oil shale samples suggest the paleoclimate was warm and humid, paleoproductivity of the lake was relatively high during deposition of the shale—which mainly occurred in fresh water—and the paleo-redox condition was dominated by reducing conditions. Fe/Ti ratios of the oil shale samples suggest clear hydrothermal influence in the eastern portion of the study area and less conspicuous hydrothermal influence in the western portion.     

Co–rich Mn crusts from the Magellan Seamount cluster: the long journey through time

The Magellan seamounts began forming as large submarine shield volcanoes south of the equator during the Cretaceous. These volcanoes formed as a cluster on the small Pacific plate in a period when tectonic stress was absent. Thermal subsidence of the seafloor led to sinking of these volcanoes and the formation of guyots as the seamounts crossed the equatorial South Pacific (10–0°S) sequentially and ocean surface temperatures became too high for calcareous organisms to survive. Guyot formation was completed between about 59 and 45 Ma and the guyots became phosphatized at about 39–34 and 27–21 Ma. Ferromanganese crusts began formation as proto-crusts on the seamounts and guyots of the Magellan Seamount cluster towards the end of the Cretaceous up to 55 Ma after the formation of the seamounts themselves. The chemical composition of these crusts evolved over time in a series of steps in response to changes in global climate and ocean circulation. The great thickness of these crusts (up to 15–20 cm) reflects their very long period of growth. The high Co contents of the outer parts of the crusts are a consequence of the increasing deep circulation of the ocean and the resulting deepening of the oxygen minimum zone with time. Growth of the Co-rich Mn crusts in the Magellan Seamount cluster can be considered to be the culmination of a long journey through time.     

Change of multifractal thermal characteristics in the western Philippine sea upper layer during internal wave-soliton propagation

The upper layer (above 140 m depth) temperature in the western Philippine Sea near Taiwan was sampled using a coastal monitoring buoy (CMB) with 15 attached thermistors during July 28–August 7, 2005. The data were collected every 10 min at 1, 3, 5, 10, 15, and 20 m using the CMB sensors, and every 15 sec at 15 different depths between 25 m and 140 m. Internal waves and solitons were identified from the time-depth plot of the temperature field. Without the internal waves and solitons, the power spectra, structure functions, and singular measures (representing the intermittency) of temperature field satisfy the power law with multi-scale characteristics at all depths. The internal waves do not change the basic characteristics of the multifractal structure. However, the internal solitons change the power exponent of the power spectra drastically, especially in the low wave number domain; they also break down the power law of the structure function and increase the intermittency parameter. The physical mechanisms causing these different effects need to be explored further.     

Mechanisms controlling the temporal variation of the sea ice edge in the Southern Ocean

This paper examines the mechanism controlling the short time-scale variation of sea ice cover over the Southern Ocean. Sea ice concentration and ice velocity datasets derived from images of the Defense Meteorological Satellite Program (DMSP) Special Sensor Microwave Imager (SSM/I) are employed to reveal this mechanism. The contribution of both dynamic and thermodynamic processes to the change in ice edge location is examined by comparing the meridional velocity of ice edge displacement and sea ice drift. In the winter expansion phase, the thermodynamic process of new ice production off the ice edge plays an important role in daily advances of ice cover, whereas daily retreats are mostly due to southward ice drift. On the other hand, both advance and retreat of ice edges in the spring contraction phase are mostly caused by the dynamic process of the ice drift. Based on the above mechanism and the linear relation between the degree of ice production at the ice edge and northward wind speed, the seasonal advance of ice cover can be roughly reproduced using the meridional velocity of ice drift at the ice edge.     

Correction method for full-depth current velocity with lowered acoustic Doppler current profiler (LADCP)

A new method is presented to process and correct full-depth current velocity data obtained from a lowered acoustic Doppler current profiler (LADCP). The analysis shows that, except near the surface, the echo intensity of a reflected sound pulse is closely correlated with the magnitude of the difference in vertical shear of velocity between downcast and upcast, indicating an error in velocity shear. The present method features the use of echo intensity for the correction of velocity shear. The correction values are determined as to fit LADCP velocity to shipboard ADCP (SADCP) and LADCP bottom-tracked velocities. The method is as follows. Initially, a profile of velocity relative to the sea surface is obtained by integrating vertical shears of velocity after low-quality data are rejected. Second, the relative velocity is fitted to the velocity at 100–800 dbar measured by SADCP to obtain an “absolute” velocity profile. Third, the velocity shear is corrected using the relationship between the errors in velocity shears and echo intensity, in order to adjust the velocity at sea bottom to the bottom-tracked velocity measured by LADCP. Finally, the velocity profile is obtained from the SADCP-fitted velocity at depths less than 800 dbar and the corrected velocity shear at depths greater than 800 dbar. This method is valid for a full-depth LADCP cast throughout which the echo intensity is relatively high (greater than 75 dB in the present analysis). Although the processed velocity may include errors of 1–2 cm s⁻¹, this method produced qualitatively good current structures in the Northeast Pacific Basin that were consistent with the deep current structures inferred from silicate distribution, and the averaged velocities were significantly different from those calculated by the Visbeck (2002) method.     

Effects of cold eddy on phytoplankton production and assemblages in Luzon strait bordering the South China Sea

The biochemical effects of a cold-core eddy that was shed from the Kuroshio Current at the Luzon Strait bordering the South China Sea (SCS) were studied in late spring, a relatively unproductive season in the SCS. The extent of the eddy was determined by time-series images of SeaWiFS ocean color, AVHRR sea surface temperature, and TOPEX/Jason-1 sea surface height anomaly. Nutrient budgets, nitrate-based new production, primary production, and phytoplankton assemblages were compared between the eddy and its surrounding Kuroshio and SCS waters. The enhanced productivity in the eddy was comparable to wintertime productivity in the SCS basin, which is supported by upwelled subsurface nitrate under the prevailing Northeastern Monsoon. There were more Synechococcus, pico-eucaryotes, and diatoms, but less Trichodesmium in the surface water inside the eddy than outside. Prochlorococcus and Richelia intracellularis showed no spatial differences. Water column-integrated primary production (IPP) inside the eddy was 2–3 times that outside the eddy in the SCS (1.09 vs. 0.59 g C m⁻²d⁻¹), as was nitrate-based new production (INP) (0.67 vs. 0.25 g C m⁻²d⁻¹). INP in the eddy was 6 times that in the Kuroshio (0.12 g C m⁻²d⁻¹). IPP and INP in the eddy were higher than the maximum production values ever measured in the SCS basin. Surface chlorophyll a concentration (0.40 mg m⁻³) in the eddy equaled the maximum concentration registered for the SCS basin and was higher than the wintertime average (0.29 ± 0.04 mg m⁻³). INP was 3.5 times as great and IPP was doubled in the eddy compared to the wintertime SCS basin. As cold core eddies form intermittently all year round as the Kuroshio invades the SCS, their effects on phytoplankton productivity and assemblages are likely to have important influences on the biogeochemical cycle of the region.     

Extended Finite Element Method for the Analysis of Discontinuities in Rock Masses

The strength and deformability of rock mass primarily depend on the condition of joints and their spacing and partially on the engineering properties of rock matrix. Till today, numerical analysis of discontinuities e.g. joint, fault, shear plane and others is conducted placing an interface element in between two adjacent rock matrix elements. However, the applicability of interface elements is limited in rock mechanics problems having multiple discontinuities due to its inherent numerical difficulties often leading to non-convergent solution. Recent developments in extended finite element method (XFEM) having strong discontinuity imbedded within a regular element provide an opportunity to analyze discrete discontinuities in rock masses without any numerical difficulties. This concept is based on partition of unity principle and can be used for cohesive rock joints. This paper summarizes the mathematical frameworks for the implementation of strong discontinuities in 3 and 6 nodded triangular elements and also provides numerical examples of the application of XFEM in one and two dimensional problems with single and multiple discontinuities.     

Influence of Environmental Factors on Spawning of the American Horseshoe Crab (<Emphasis Type="Italic">Limulus polyphemus</Emphasis>) in the Great Bay Estuary,New Hampshire,USA

The Great Bay Estuary, New Hampshire, USA is near the northern distribution limit of the American horseshoe crab (Limulus polyphemus). This estuary has few ideal beaches for spawning, yet it supports a modest population of horseshoe crabs. There is no organized monitoring program in the Great Bay Estuary, so it is unclear when and where spawning occurs. In this 2-year study (May through June, 2012 and 2013), >5,000 adult horseshoe crabs were counted at four sites in the estuary. The greatest densities of horseshoe crabs were observed at Great Bay sites in the upper, warmer reaches of the estuary. Peaks of spawning activity were not strongly correlated with the times of the new or full moons, and similar numbers of horseshoe crabs were observed mating during daytime and nighttime high tides. While many environmental factors are likely to influence the temporal and spatial patterns of spawning in this estuary, temperature appears to have the most profound impact.     

Dominant climate factors influencing the Arctic runoff and association between the Arctic runoff and sea ice

By using the Arctic runoff data from R-ArcticNET V4.0 and ArcticRIMS, trends of four major rivers flowing into the Arctic Ocean, whose climate factor plays an important role in determining the variability of the Arctic runoff, are investigated. The results show that for the past 30 years, the trend of the Arctic runoff is seasonally dependent. There is a significant trend in spring and winter and a significant decreasing trend in summer, leading to the reduced seasonal cycle. In spring, surface air temperature is the dominant factor influencing the four rivers. In summer, precipitation is the most important factor for Lena and Mackenzie, while snow cover is the most important factor for Yenisei and Ob. For Mackenzie, atmospheric circulation does play an important role for all the seasons, which is not the case for the Eurasian rivers. The authors further discuss the relationships between the Arctic runoff and sea ice. Significant negative correlation is found at the mouth of the rivers into the Arctic Ocean in spring, while significant positive correlation is observed just at the north of the mouths of the rivers into the Arctic in summer. In addition, each river has different relationship with sea ice in the eastern Greenland Sea.