Experimental investigation of water impact on axisymmetric bodies

The results of an elaborate experimental investigation on bottom slamming of axisymmetric objects are presented. Drop tests have been performed on a hemisphere and two conical shapes with different deadrise angles. The test setup is designed so as to prevent small rotations of the test objects which cause scatter in the measurement data. The pressure distribution and evolution as well as the body motion parameters are measured during impact. By means of a high speed camera the water uprise is visualized and the wetting factor is determined for the cones. The results are compared with a three-dimensional asymptotic theory for axisymmetric rigid bodies with constant entry velocity. The ratio between the registered peak pressures and the asymptotic theory are in accordance with comparable experiments in the literature. The asymptotic theory, however, is found to be quite conservative, since the measured peak pressure levels appear to be approximately 50% to 75% of the theoretical levels.     

High-resolution record of tectonic and sedimentary processes in growth strata

Growth strata are used to determine the kinematics of synsedimentary structures such as faults. Classical methods of analysis such as thickness versus throw plot consider that the available space created by fault slip in the hanging wall of faults is instantaneously filled up by sediments. This has lead many previous works to identify a cyclic activity for growth faults. Here we perform a careful analysis of the variation of strata thicknesses on each side of a very well documented normal growth fault in the Niger delta. We show that these thickness variations are induced by the alternation of sedimentary processes during continuous fault slip. Suspended-load processes induce either uniform or slightly variable thickness of a large majority of mudstone layers. Bedload processes result in a preferential thickening of sand layers in the hanging wall. These high quality data thus provide strong grounds for doubting the polycyclic growth diagnosed for some faults at the scale of sedimentary cycles and supports the notion that fault displacement rates can be very well behaved. Our study emphasizes the important conclusion that stable fault growth, and related displacement rates, can appear to be punctuated when viewed at the scale of sedimentary cycles. It follows that care should be taken when attempting to derive displacement rates on temporal scales equivalent to those of alternating sedimentological cycles.     

Differential reproductive strategies of two bivalves in the Dutch Wadden Sea

Cerastoderma edule and Mya arenaria are two common bivalve species in European waters. Longevity and maximum size are much greater in the latter species. Because comparison of species life-history strategies states that a long life span (i.e. high annual survival) generally goes with lower fecundity, we hypothesise that reproductive output would be lower in M. arenaria than in C. edule. In the present paper, we studied the reproductive strategies of these two species in an intertidal and a subtidal area of the western Dutch Wadden Sea, by following seasonal changes in absolute and relative weights of somatic and gonadal tissues in these bivalves. Starting of spawning was similar in the two species, around May, except for intertidal M. arenaria, which initiated spawning in August. Individual energy investment in reproduction was similar for the two species but, unlike M. arenaria, C. edule spawned completely, releasing all energy of gonadal mass in the form of gametes. Mya arenaria used the gonad not only for reproduction but also for storage. In the intertidal area, we found a trade-off between longevity and reproduction, i.e. maximum reproductive output (expressed as a proportion of body mass) was higher in C. edule than in M. arenaria. However, since body size is larger and life span longer in M. arenaria than in C. edule, mean lifetime reproductive output per individual must be higher in the first than in the latter. Based on the differences in reproductive strategies of these two species, we hypothesise that the negative effects of warming climate on bivalve population dynamics in the Wadden Sea will be stronger in C. edule than in M. arenaria.     

A protocol for classifying ecologically relevant marine zones,a statistical approach

Mapping ecologically relevant zones in the marine environment has become increasingly important. Biological data are however often scarce and alternatives are being sought in optimal classifications of abiotic variables. The concept of ‘marine landscapes’ is based on a hierarchical classification of geological, hydrographic and other physical data. This approach is however subject to many assumptions and subjective decisions.     

Barred Spirals,Double Galaxies and massive Halos1

It is shown that there is no significant dependence of the frequency with which barred spirals occur on environment. Therefore, the difference between normal and barred spirals must be largely due to initial conditions. The excess of early type galaxie (in particular ellipticals and SO's) among the statistically selected binary samples is probably caused by a contamination by cluster members and will therefore result in a systematic overestimate of the masses of binary galaxies. The large fraction of multiple first-ranked galaxies found in rich clusters of BAUTZ -MORGAN type I is surprising in view of tidal effects and dynamical friction, which should lead to the destruction of such massive binary systems on a time scale much shorter than the age of the Universe.     

Calibrating the GOCE accelerations with star sensor data and a global gravity field model

A reliable and accurate gradiometer calibration is essential for the scientific return of the gravity field and steady-state ocean circulation explorer (GOCE) mission. This paper describes a new method for external calibration of the GOCE gradiometer accelerations. A global gravity field model in combination with star sensor quaternions is used to compute reference differential accelerations, which may be used to estimate various combinations of gradiometer scale factors, internal gradiometer misalignments and misalignments between star sensor and gradiometer. In many aspects, the new method is complementary to the GOCE in-flight calibration. In contrast to the in-flight calibration, which requires a satellite-shaking phase, the new method uses data from the nominal measurement phases. The results of a simulation study show that gradiometer scale factors can be estimated on a weekly basis with accuracies better than 2 × 10⁻³ for the ultrasensitive and 10⁻² for the less sensitive axes, which is compatible with the requirements of the gravity gradient error. Based on a 58-day data set, scale factors are found that can reduce the errors of the in-flight-calibrated measurements. The elements of the complete inverse calibration matrix, representing both the internal gradiometer misalignments and scale factors, can be estimated with accuracies in general better than 10⁻³.     

Preprocessing of gravity gradients at the GOCE high-level processing facility

One of the products derived from the gravity field and steady-state ocean circulation explorer (GOCE) observations are the gravity gradients. These gravity gradients are provided in the gradiometer reference frame (GRF) and are calibrated in-flight using satellite shaking and star sensor data. To use these gravity gradients for application in Earth scienes and gravity field analysis, additional preprocessing needs to be done, including corrections for temporal gravity field signals to isolate the static gravity field part, screening for outliers, calibration by comparison with existing external gravity field information and error assessment. The temporal gravity gradient corrections consist of tidal and nontidal corrections. These are all generally below the gravity gradient error level, which is predicted to show a 1/f behaviour for low frequencies. In the outlier detection, the 1/f error is compensated for by subtracting a local median from the data, while the data error is assessed using the median absolute deviation. The local median acts as a high-pass filter and it is robust as is the median absolute deviation. Three different methods have been implemented for the calibration of the gravity gradients. All three methods use a high-pass filter to compensate for the 1/f gravity gradient error. The baseline method uses state-of-the-art global gravity field models and the most accurate results are obtained if star sensor misalignments are estimated along with the calibration parameters. A second calibration method uses GOCE GPS data to estimate a low-degree gravity field model as well as gravity gradient scale factors. Both methods allow to estimate gravity gradient scale factors down to the 10⁻³ level. The third calibration method uses high accurate terrestrial gravity data in selected regions to validate the gravity gradient scale factors, focussing on the measurement band. Gravity gradient scale factors may be estimated down to the 10⁻² level with this method.     

The multiple chronological techniques applied to the Lake Suigetsu SG06 sediment core,central Japan

The varved sediment of Lake Suigetsu (central Japan) provides a valuable opportunity to obtain high‐resolution, multi‐proxy palaeoenvironmental data across the last glacial/interglacial cycle. In order to maximize the potential of this archive, a well‐constrained chronology is required. This paper outlines the multiple geochronological techniques being applied – namely varve counting, radiocarbon dating, tephrochronology (including argon–argon dating) and optically stimulated luminescence (OSL) – and the approaches by which these techniques are being integrated to form a single, coherent, robust chronology. Importantly, we also describe here the linkage of the floating Lake Suigetsu (SG06) varve chronology and the absolute (IntCal09 tree‐ring) time scale, as derived using radiocarbon data from the uppermost (non‐varved) portion of the core. This tie‐point, defined as a distinct (flood) marker horizon in SG06 (event layer B‐07–08 at 1397.4 cm composite depth), is thus derived to be 11 255 to 11 222 IntCal09 cal. years BP (68.2% probability range).     

Can 234U–230Th dating be used to date large semi‐arid tufas? Challenges from a study in the Naukluft Mountains,Namibia

The large, extensive tufa deposits of the semi‐arid Naukluft Mountains, Namibia are potentially important palaeoenvironmental indicators in an area with few proxy records. Tufas are reliable indicators of increased moisture availability, and have been shown to be amenable to ²³⁴U–²³⁰Th dating, although two challenges are detrital contamination and open‐system behaviour. Densely cemented tufa facies are good candidates for dating, minimising these problems. We report attempts to date five densely‐cemented units, which are only found rarely within the Naukluft deposits. We applied a detailed methodology using multiple subsample analysis, measurement of insoluble residues, application of ‘isochron’ mixing lines, and attempted open‐systems modelling, alongside observations of micromorphology and cathodoluminescence in order to assess the validity of any obtained dates. Surprisingly, densely cemented tufas were found not always to be suitable for dating. Two units contained detrital contamination, which could not be corrected for using a single leachate correction or ‘isochron’ methods. Two units contained ‘excess ²³⁰Th’. This could result under a closed‐system if initial (²³⁴U/²³⁸U) was sufficiently high. Alternatively this may be the result of open‐system behaviour, and loss of uranium, or incorporation of initial unsupported ²³⁰Th, which render samples unsuitable for ²³⁴U–²³⁰Th dating. Micromorphological appearance and cathodoluminescence behaviour are used to explore these possibilities. This study exemplifies the need for careful sample selection, and highlights the importance of analysing multiple subsamples from any tufa sample. The detailed methodology applied proves to be a powerful tool for identifying the range of problems that can be encountered when selecting suitable candidate samples for successful dating. It also shows that semi‐arid tufa sequences may contain very little material suitable for dating. A reliable age of c 80 ka was obtained for a banded unit within a large fluvial barrage, with less reliable dates suggesting tufa deposition during times since >350 ka through to the late Holocene. Copyright © 2010 John Wiley & Sons, Ltd.     

Holocene peatland development and hydrological variability inferred from bog‐pine dendrochronology and peat stratigraphy – a case study from southern Sweden

Dendrochronological analysis was applied to subfossil remains of Scots pine (Pinus sylvestris L.) buried in a South Swedish peat deposit. In combination with peat stratigraphy, this approach was explored for its potential to provide information on the local hydrological and depositional history at the site, forming the basis for a regional palaeohydrological analysis. A 726‐year ring‐width chronology was developed and assigned an absolute age of 7233–6508 cal a BP (5284–4559 BC) through cross‐dating with German bog‐pine chronologies, whereas two short additional records of older ages were radiocarbon dated. Registration of growth positions of individual trees allowed assessment of the spatial dynamics of the pine population in response to hydrological changes and peatland ontogeny. Annually resolved growth variability patterns in the pine population reveal several establishment and degeneration phases, probably reflecting fluctuations in bog‐surface wetness. A major establishment phase at 7200–6900 cal a BP reflects the onset of a period of lowered groundwater level, also indicated by increased peat humification, and a development consistent with regional temperature and lake level reconstructions revealed from other proxies. This study demonstrates that subfossil bog‐pine populations may provide annually to decadally resolved reconstructions of local groundwater variability, which are highly relevant in a long‐term palaeoclimatic context. Copyright © 2012 John Wiley & Sons, Ltd.