Progressive failure leading to the 3 December 2013 rockfall at Puigcercós scarp (Catalonia,Spain)

A detailed analysis of the pre-failure behavior of the 3 December 2013 rockfall (1,012 m³) occurred on Puigcercós pilot study area (Catalonia, Spain) is presented. The exact date of failure was obtained based on a photographic monitoring performed every 4 h. The long-term monitoring (2,217 days) of the rock slope carried out by a Terrestrial LiDAR allowed the early detection of both pre-failure deformation and precursory rockfalls preceding the final failure. By means of the analysis of the pre-failure deformation, four different deformed areas were detected and the tertiary creep phase was observed in three of them. An attempt to predict the time to failure was performed using the Fukuzono’s (1985) method. Furthermore, the temporal evolution of the precursory rockfalls occurred in those four areas during the progressive failure showed a close resemblance with the exponential pattern of the cumulated displacements at tertiary creep stage. Finally, the study of the meteorological conditions did not show any single triggering factor associated with the final failure. Reversely, the increase in the occurrence of precursory rockfalls on several areas of the slope together with the observed acceleration on the deformation pattern reinforce the role of a progressive degradation of the stability conditions, which ultimately leaded to the 3 December rockfall event.     

The role of iron and sulfur in the visual appearance of lake sediment varves

Easily discernible sediment varves (annual laminations) may be formed in temperate zone lakes, and reflect seasonal changes in the composition of the accumulating material derived from the lake and its catchment (minerogenic and organic material). The appearance of varves may also be influenced by chemical processes. We assessed the role of iron (Fe) and sulfur (S) in the appearance of varves in sediments from Lake Nylandssjön in northern Sweden. We surveyed Fe in the lake water and established whether there is internal transport of Fe within the sediment. We used a unique collection of seven stored freeze cores of varved sediment from the lake, collected from 1979 to 2004. This suite of cores made it possible to follow long-term changes in Fe and S in the sediment caused by processes that occur in the lake bottom when the sediment is ageing. We compared Fe and S concentrations using X-ray fluorescence spectroscopy (XRF) in specific years in the different cores. No diagenetic front was found in the sediment and the data do not suggest that there is substantial vertical transport of Fe and S in the sediment. We also modeled Fe and S based on thermodynamic, limnological, and sediment data from the lake. The model was limited to the five components H⁺, e^?, Fe³⁺, SO₄ ^2?, H₂CO₃ and included the formation of solid phases such as Fe(OH)₃ (amorphous), FeOOH (aged, microcrystalline), FeS and FeCO₃. Modeling showed that there are pe (redox) ranges within which either FeS or Fe(OH)₃/FeOOH is the only solid phase present and there are pe ranges within which the two solid phases co-exist, which supports the hypothesis that blackish and grey-brownish layers that occur in the varves were formed at the time of deposition. This creates new possibilities for deciphering high-temporal-resolution environmental information from varves.     

Trace elements contamination of agricultural soils affected by sulphide exploitation (Iberian Pyrite Belt,Sw Spain)

Agricultural soils of the Riotinto mining area (Iberian Pyrite Belt) have been studied to assess the degree of pollution by trace elements as a consequence of the extraction and treatment of sulphides. Fifteen soil samples were collected and analysed by ICP-OES and INAA for 51 elements. Chemical analyses showed an As–Cu–Pb–Zn association related with the mineralisation of the Iberian Pyrite Belt. Concentrations were 19–994 mg kg⁻¹ for As, 41–4,890 mg kg⁻¹ for Pb, 95–897 mg kg⁻¹ for Zn and of 27–1,160 mg kg⁻¹ for Cu. Most of the samples displayed concentrations of these elements higher than the 90th percentile of the corresponding geological dominium, which suggests an anthropogenic input besides the bedrock influence. Samples collected from sediments were more contaminated than leptosols because they were polluted by leachates or by mining spills coming from the waste rock piles. The weathering of the bedrock is responsible for high concentrations in Co, Cr and Ni, but an anthropogenic input, such as wind-blown dust, seems to be indicative of the high content of As, Cu, Pb and Zn in leptosols. The metal partitioning patterns show that most trace elements are associated with Fe amorphous oxy-hydroxides, or take part of the residual fraction. According to the results obtained, the following mobility sequence is proposed for major and minor elements: Mn, Pb, Cd, > Zn, Cu > Ni > As > Fe > Cr. The high mobility of Pb, Cu and Zn involve an environmental risk in this area, even in soils where the concentrations are not so high.     

U–Pb geochronology of the southern Brasília belt (SE-Brazil): sedimentary provenance, Neoproterozoic orogeny and assembly of West Gondwana

The Brasília belt borders the western margin of the São Francisco Craton and records the history of ocean opening and closing related to the formation of West Gondwana. This study reports new U–Pb data from the southern sector of the belt in order to provide temporal limits for the deposition and ages of provenance of sediments accumulated in passive margin successions around the south and southwestern margins of the São Francisco Craton, and date the orogenic events leading to the amalgamation of West Gondwana.Ages of detrital zircons (by ID–TIMS and LA-MC-ICPMS) were obtained from metasedimentary units of the passive margin of the São Francisco Craton from the main tectonic domains of the belt: the internal allochthons (Araxá Group in the Áraxá and Passos Nappes), the external allochthons (Canastra Group, Serra da Boa Esperança Metasedimentary Sequence and Andrelândia Group) and the autochthonous or Cratonic Domain (Andrelândia Group). The patterns of provenance ages for these units are uniform and are characterised as follows: Archean–Paleoproterozoic ages (3.4–3.3, 3.1–2.7, and 2.5–2.4 Ga); Paleoproterozoic ages attributed to the Transamazonian event (2.3–1.9 Ga, with a peak at ca. 2.15 Ga) and to the ca. 1.75 Ga Espinhaço rifting of the São Francisco Craton; ages between 1.6 and 1.2 Ga, with a peak at 1.3 Ga, revealing an unexpected variety of Mesoproterozoic sources, still undetected in the São Francisco Craton; and ages between 0.9 and 1.0 Ga related to the rifting event that led to the individualisation of the São Francisco paleo-continent and formation of its passive margins. An amphibolite intercalation in the Araxá Group yields a rutile age of ca. 0.9 Ga and documents the occurrence of mafic magmatism coeval with sedimentation in the marginal basin.Detrital zircons from the autochthonous and parautochthonous Andrelândia Group, deposited on the southern margin of the São Francisco Craton, yielded a provenance pattern similar to that of the allochthonous units. This result implies that 1.6–1.2 Ga source rocks must be present in the São Francisco Craton. They could be located either in the cratonic area, which is mostly covered by the Neoproterozoic epicontinental deposits of the Bambuí Group, or in the outer paleo-continental margin, buried under the allochthonous units of the Brasília belt.Crustal melting and generation of syntectonic crustal granites and migmatisation at ca. 630 Ma mark the orogenic event that started with westward subduction of the São Francisco plate and ended with continental collision against the Paraná block (and Goiás terrane). Continuing collision led to the exhumation and cooling of the Araxá and Passos metamorphic nappes, as indicated by monazite ages of ca. 605 Ma and mark the final stages of tectonometamorphic activity in the southern Brasília belt.Whilst continent–continent collision was proceeding on the western margin of the São Francisco Craton along the southern Brasília belt, eastward subduction in the East was generating the 634–599 Ma Rio Negro magmatic arc which collided with the eastern São Francisco margin at 595–560 Ma, much later than in the Brasília belt. Thus, the tectonic effects of the Ribeira belt reached the southernmost sector of the Brasília belt creating a zone of superposition. The thermal front of this event affected the proximal Andrelândia Group at ca. 588 Ma, as indicated by monazite age.The participation of the Amazonian craton in the assembly of western Gondwana occurred at 545–500 Ma in the Paraguay belt and ca. 500 Ma in the Araguaia belt. This, together with the results presented in this work lead to the conclusion that the collision between the Paraná block and Goiás terrane with the São Francisco Craton along the Brasília belt preceded the accretion of the Amazonian craton by 50–100 million years.     

Upper Cretaceous marine‐continental transition (Leonese Area,NW Spain) defined from integrated outcrop and seismic stratigraphy

The Upper Cretaceous succession of the Leonese Area (NW Spain) comprises mixed clastic and carbonate sediments. This succession is divided into two lithostratigraphic units, the Voznuevo Member and the Boñar Formation, which represent fluvial, shoreface, intertidal, subtidal and open‐shelf sedimentary environments. Regional seismic interpretation and sequence stratigraphic analysis have allowed the study of lateral and vertical changes in the sedimentary record and the definition of third‐order levels of stratigraphic cyclicity. On the basis of these data, the succession can be divided into two second‐order depositional sequences (DS‐1 and DS‐2), incorporating three system tracts in a lowstand to transgressive to highstand system tract succession (LST–TST–HST). These sequences are composed of fluvial systems at the base with palaeocurrents that flowed westward and south‐westward. The upper part of DS‐1 (Late Albian–Middle Turonian) shows evidence of intertidal to subtidal and offshore deposits. DS‐2 (Late Turonian–Campanian) comprises intertidal to subtidal, tidal flat, shallow marine and lacustrine deposits and interbedded fluvial deposits. Two regressive–transgressive cycles occurred in the area related to eustatic controls. The evolution of the basin can be explained by base‐level changes and associated shifts in depositional trends of successive retrogradational episodes. By using isobath and isopach maps, the main palaeogeographic features of DS‐1 and DS‐2 were constrained, namely coastline positions, the existence and orientation of corridors through which fluvial networks were channelled and the location of the main depocentres of the basin. Sedimentation on the Upper Cretaceous marine platform was mainly controlled by (i) oscillations of sea level and (ii) the orientation of Mesozoic faults, which induced sedimentation along depocentres. Copyright © 2013 John Wiley & Sons, Ltd.     

Les composantes du déplacement séculaire du pôle d'inertie de la Terre

After homogenizing the declination systems of the ILS Catalogue, the secular motion of the mean pole is studied. Our analyses leads to two components of this motion: a progressive component (already known) and an elliptical one.     

Observations of shocked [FeII] and H2 line profiles in orion bullet wakes

Recent near-IR imaging of the Orion molecular cloud has revealed a complex of dense bullets, visible as [FeII] emitting HH-objects at the tips of H₂ wakes, ejected explosively from the cloud core. Having resolved individual bow-shock structures for the first time in this bright source, we have observed [FeII] 1.644µm velocity profiles of selected bullets and H₂ 1-0 S(1), 2.122µm velocity profiles for a series of positions along and across the corresponding bow-shock wakes. We present observed profiles for the bullet M42 HH1 and its associated wake and compare with theoretical bow-shock models.     

Ondes de surface

Résumé Le but de ce mémoire est de démontrer quelques nouvelles propriétés générales d'une classe de fonctions (les ondes de surface) très importante par son rôle en physique et en géophysique.On commence par la démontration d'un théoréme fondamental qui établit l'identité de l'ensemble des ondes de surface et de l'ensemble des fonctions pour lesquelles, à tout instantt ₀ et en tout pointA ₀ de leur domaine d'existence, on peut écrire une proportionnalité entre intervalles de temps (situés, en général asymétriquement, de part et d'autre det ₀) et rayons des domaines circulaires centrés enA ₀, telle que les moyennes temporelles et spatiales correspondantes soient égales. Ce théorème permet d'écrire, en termes finis, la solution des équations aux dérivées partielles de toute onde de surface.On applique ensuite les résultats généraux: 1° à la variation diurne de la pression lce qui permet de voir que ce phénomène peut être considéré comme une onde de surface et donne la loi fondamentale en cos³ ( latitude) pour l'amplitude de l'onde semidiurne progressive]; 2° aux ondes de variation de la pression synoptique. Pour ces ondes de variation on établit les relations qui existent entre leurs paramètres caractéristiques et on détermine finalement leur configuration théorique.

---

Summary The aim of this paper is to give the proof of some new general properties of a class of functions (the surface waves) which is very important in physics and geophysics.We first give the proof of a fundamental theorem establishing the identity of the set of all surface waves and the set of functions for which, at any momentt ₀ and at any pointA ₀ of their domain, there exists a proportionality between time intervals comprisingt ₀ (asymmetrically, in the general case) and the radius of the circular domains centered onA ₀, such that the corresponding temporal and spatial means are equal. This theorem allows to write in finite terms the solution of the partial differential equations of any surface wave.The general results are then applied: 1° to the diurnal pressure variation, showing that this phenomenon can be considered as a surface wave and giving the fundamental law cos³ ( latitude) for the amplitude of the progressive or travelling 12-hourly wave; 2° to the waves of the synoptic pressure variations. For these waves the relations between their characteristic parameters is first established and finally their theoretical spatial configuration or pattern is deduced.

---

---

Communication faite le 23 Avril 1957 à la Cinquième Assemblée de la «Società Italiana di Geofisica e Meteorologia» (Genova, 23–25 Avril 1957).     

In Situ Measurement of Pinna nobilis Shells for Age and Growth Studies: A New Device

Abstract. Pinna nobilis Linnaeus 1758 is an endemic bivalve mollusc in the Mediterranean Sea, where it inhabits seagrass meadows, especially Posidonia oceanica (L.) Delile. It is the largest bivalve in the Mediterranean, reaching lengths up to 120 cm. In its natural habitat, P. nobilis lives with the anterior part of the valve buried in the seabed, attached to Posidonia rhizomes by byssus threads.
This habit makes it impossible to measure its total length directly in situ. As the only way to determine the individual age is the relationship between age and total length, several equations have been proposed to estimate total length by relating it to the unburied parts of the shell. Such measurements are essential to ecological studies that consider age, growth, and population dynamics, and that evaluate the environmental factors that affect this species.
Accurately estimating total length depends on the accuracy and precision of the method employed to measure the unburied shell parts. In this paper, we point out the lack of precision of the instruments and methods used until now; we also demonstrate the reason for this imprecision. A new device to measure unburied parts of Pinna nobilis with a precision comparable to that obtained when measuring extracted valves is described. This device is unaffected by substratum type and reduces measurement time. The latter is a very important feature, because these procedures are usually performed whilst SCUBA diving. Finally, a growth equation has been fitted to the measurements obtained with the new device from a population located in Moraira (Alicante, western Mediterranean).     

Participation and fisheries management in Costa Rica: From theory to practice

Participatory fisheries management has been increasingly proposed as a useful management approach to address fisheries problems. However, the criteria regarding its applicability and measures of success still seem unclear. This study reviews the main concepts and theory behind two participatory resource-management approaches and compares them to the reality of fisheries management in Costa Rica. The analysis shows that while the implementation of a participatory approach in fisheries management should be encouraged, it is essential to keep in mind the possible limitations these approaches have. Furthermore, it seems important to improve institutional coordination and develop social, legal and economic policies that will allow the state, together with coastal communities, to contribute in an effective way to fisheries management.