Al hematites prepared by homogeneous precipitation of oxinates: material characterization and determination of the Morin transition

A novel method for synthesis of aluminium hematites, based upon the homogeneous precipitation of Fe and Al oxinates in various proportions, is presented. The precursor precipitates are heated in air at 700?°C. X-ray diffraction, thermal analyses, BET, FTIR, optical reflection analysis, TEM and Mössbauer spectroscopy at room temperature and 80?K of the resulting products indicate that single-phase hematites are formed with structural Al substitution of up to 10 at%. Interestingly, the particle size (>100?nm) is not substantially reduced by the Al content. Although it remains difficult to obtain a homogeneously distributed Al substitution in the final hematite, this processing line offers a unique opportunity to separate the effects of grain size and Al substitution on the Morin transition temperature (T _M) of Al hematite. From the comparison between the present hematites and a series of Al-substituted hematites with lepidocrocite as precursor, it could be shown that the effect on T _M, associated with a change of a factor 10 in grain size, is about 1/3 of the effect caused by a change of 10 in the degree of substitution. Finally, it is suggested that proper thermal treatments under different conditions of the same precursors are likely to produce spinel phases.     

Bedded jaspers of the Ordovician Løkken ophiolite,Norway: seafloor deposition and diagenetic maturation of hydrothermal plume-derived silica-iron gels

Sedimentary beds of jasper (red hematitic chert) in the Ordovician Løkken ophiolite of Norway are closely associated with volcanogenic massive sulphide (VMS) deposits. The jaspers occur in the immediate hangingwall and laterally peripheral to the large Løkken (25–30 Mt) and small Høydal (0.1 Mt) VMS deposits, and are exposed discontinuously for several kilometres along strike. Massive or laminated types predominate; jasper-sulphide debris-flow deposits are also abundant near VMS deposits. The jaspers contain hematite-rich laminae showing soft-sediment deformation structures and microtextural evidence that record the presence of a colloidal precursor and an origin as gels. Early textures include: (1) straight or curved chains of hematitic filaments 3–10 µm in diameter and 20–100 µm long; (2) branching networks of 15–25 µm-thick, tubular structures surrounded by cryptocrystalline hematite and filled with quartz and euhedral hematite; (3) small (up to 10 µm) spherules composed of cryptocrystalline hematite and silica; and (4) up to 50 µm silica spherules with hematitic cores. The small filaments seem to have been deposited in varying proportions in the primary laminae, possibly together with hematitic and siliceous microspheroids. Diagenetic changes are represented by polygonal syneresis cracks, and the presence of cryptocrystalline (originally opaline) silica, chalcedony, quartz, carbonate and cryptocrystalline hematite and/or goethite forming botryoidal masses and spheroids <10 µm to 5 mm in diameter. Coarser euhedral grains of quartz, carbonate, and hematite are integral parts of these textures. Bleached, silica-rich jaspers preserve only small relics of fine-grained hematite-rich domains, and locally contain sparse pockets composed of coarse euhedral hematite±epidote. The jaspers are interpreted to record colloidal fallout from one or more hydrothermal plumes, followed by maturation (ageing) of an Si-Fe-oxyhydroxide gel, on and beneath the Ordovician sea floor. Small hematitic filaments in the jaspers reflect bacteria-catalysed oxidation of Fe ²⁺ within the plume. The larger tubular filaments resulted from either microbial activity or inorganic self-organized mineral growth of Fe-oxyhydroxide within the Si-Fe-oxyhydroxide gel after deposition on the sea floor, prior to more advanced maturation of the gel as represented by the spheroidal and botryoidal silica-hematite textures. Bleaching and hematite±epidote growth are interpreted to reflect heat and fluids generated during deposition of basaltic sheet flows on top of the gels.     

A powder diffraction quantification method (ALJOR) for atmospheric particulate matter

The percentage calculation of crystalline phases in atmospheric particulate matter samples by means of an adiabatic approach of the matrix-flushing method with preferred preparations that avoids preferential orientations, should never be interpreted as absolute values. On the contrary, it should be seen as an indicator of the significant differences between each and every analyzed sample. Factors such as the application of constants, which are only useful for preparations of polycrystalline samples free of preferential orientation, and/or like the deficient resolution shown by the diffraction diagrams for certain phyllosilicate phases, bring a high degree of uncertainty to these percentage calculations. An alternative method of crystalline and amorphous phase quantification is presented below. Once the majority phases in the samples were identified, appropriate pure phases corresponding to each of them were selected. Then, the corresponding calibration curves were built using corundum (number 676 NIST) as a reference pattern phase. After validating the obtained calibration curves, the constants corresponding to each phase and selected spacing were calculated. The ALJOR method has been used for the quantification of five samples.     

Study of geothermal water intrusion due to groundwater exploitation in the Puebla Valley aquifer system, Mexico

Significant intrusion of geothermal water into fresh groundwater takes place in the Puebla Valley aquifer system, Mexico. The decline in the potentiometric surface due to the overexploitation of the groundwater induces this intrusion. This hydrological system comprises three aquifers located in Plio-Quaternary volcanic sediments and Mesozoic calcareous rocks. The hydraulic balance of the aquifer shows that the annual output exceeds the natural inputs by 12 million m³. Between 1973 and 2002, a drop in the potentiometric surface, with an 80 m cone of depression, was identified in a 5-km-wide area located southwest of the city of Puebla. Chemical analyses performed on water samples since 1990 have shown an increase in total dissolved solids (TDS) of more than 500 mg/L, coinciding with the region showing a cone of depression in the potentiometric surface. A three-dimensional flow and transport model, based on the hydrogeological and geophysical studies, was computed by using the MODFLOW and MT3D software. This model reproduces the evolution of the aquifer system during the last 30 years and predicts for 2010 an additional drawdown in the potentiometric surface of 15 m, and an increase in the geothermal water intrusion.     

Avalanche Risk During Backcountry Skiing – An Analysis of Risk Factors

Skier-triggered avalanches are the main cause of avalanche accidents in backcountry skiing. The risk of accidents during backcountry skiing was analysed statistically and related to factors such as elevation level, aspect, stability rating and the time of the year. The analysis is based on a database about terrain usage and avalanche accidents from a large heli-skiing operator in Canada, which makes it possible to study the conditional probability of accidents given the recorded pattern of terrain usage. This study shows that the historical risk of accidentally triggering an avalanche greater than size 1 depends highly on the stability rating, with the highest risk occurring during “poor” stability. The risk is greater at high elevations, and it is lower during the late season than earlier on. Skier risk does not depend as much on aspect as may be indicated from avalanche data alone. However, it is relatively high in the N–NE–E sector. These factors are not independent of each other and therefore analyses of combined factors were also performed. Questionnaires and interviews were used to gain knowledge about the terrain selection of professional mountain guides. These results indicate that when selecting terrain, guides first look at the overall shape and size of the terrain, but avalanche history of terrain and inclination are also important factors. Finally, remarks in avalanche reports were analysed, and common human factors identified.     

Effect of sampling and linkage on fault length and length–displacement relationship

The power-law exponent (n) in the equation: D=cL ⁿ , with D = maximum displacement and L = fault length, would be affected by deviations of fault trace length. (1) Assuming n=1, numerical simulations on the effect of sampling and linkage on fault length and length–displacement relationship are done in this paper. The results show that: (a) uniform relative deviations, which means all faults within a dataset have the same relative deviation, do not affect the value of n; (b) deviations of the fault length due to unresolved fault tip decrease the values of n and the deviations of n increase with the increasing length deviations; (c) fault linkage and observed dimensions either increase or decrease the value of n depending on the distribution of deviations within a dataset; (d) mixed deviations of the fault lengths are either negative or positive and cause the values of n to either decrease or increase; (e) a dataset combined from two or more datasets with different values of c and orders of magnitude also cause the values of n to deviate. (2) Data including 19 datasets and spanning more than eight orders of fault length magnitudes (10⁻²–10⁵ m) collected from the published literature indicate that the values of n range from 0.55 to 1.5, the average value being 1.0813, and the peak value of n _d (double regression) is 1.0–1.1. Based on above results from the simulations and published data, we propose that the relationship between the maximum displacement and fault length in a single tectonic environment with uniform mechanical properties is linear, and the value of n deviated from 1 is mainly caused by the sampling and linkage effects.     

The Spačice eclogite: constraints on the P–T–t history of the Gföhl granulite terrane, Moldanubian Zone, Bohemian Massif

Summary In the Kutná Hora Complex, the Běstvina Formation, which is similar to Gf?hl granulite, contains eclogite that has escaped widespread retrograde recrystallization. The eclogite assemblage, garnet + omphacite + quartz + rutile ± plagioclase, yields an estimate for peak metamorphic conditions of 18–20 kbar and 835–935 °C, which is comparable to that determined from felsic granulite, 14–20 kbar and 900–1000 °C. Garnet in eclogite exhibits both prograde and retrograde compositional zoning, from which constraints on thermal history of the Gf?hl terrane can be derived by diffusion modelling. At 900 °C, a garnet grain of 800–1000 μm radius would homogenize in 7.5–11.7 million years, but the existence of compositional gradients on a length scale of 100–200 μm suggests that the duration of peak metamorphism may have been limited to ∼500,000 years. Diffusion modelling of retrograde zoning in garnet yields a cooling rate of 150–100 °C/m.y. for a radius of 800–1000 μm and initial temperature of 900 °C. The relatively brief duration of high-pressure/high-temperature metamorphism and rapid cooling and exhumation of the Gf?hl terrane may be a consequence of lithospheric delamination during Early Carboniferous collision of Bohemia (Teplá-Barrandia) and Moldanubia (Franke, 2000).     

Trends in phosphatase activity along a successional gradient of tidal freshwater marshes on the Cooper River South Carolina

Phosphatase activity was measured in sediments from tidal freshwater habitats adjacent to the Cooper River in South Carolina representing different stages of ecological succession. It was found that sediment (0–5 cm) acid phosphatase activity, alkaline phosphatase activity and phosphodiesterase activity increased with increasing successional stage and phytomass. Acid phosphatase activity in creased from 7.5±1.2 (±1 SD) in subtidal sediment from a shallow open water habitat without vegetation to 61.2±4.9 μmol g⁻¹ hr⁻¹ (μmol of p-nitrophenol released per gram of dry sediment per hour) in intertidal sediments colonized by emergent macrophytes, while alkaline phosphatase activity increased from 2.1±0.1 to 19.01±1.5 μmol g⁻¹ hr⁻¹. Phosphodiesterase activity increased from 1.8±0.1 to 20.2±2.0 μmol g⁻¹ hr⁻¹ along the same gradient. Acid phosphatase activity was highly correlated (R²=0.92, P<0.001) with the organic matter content of the sediment. A study of phosphatase kinetics showed that V_max of all phosphatases also increased along the successional gradient. Trends in phosphatase activity and V_max correlated positively with plant biomass and negatively with concentrations of soluble reactive phosphorus in porewater, sediment extractable phosphorus, and total phosphourus. The porewater N∶P atom ratio decreased along the succession gradient from 25.3 in an early stage, open water community to 13.0 in a community dominated by emergent vegetation. The data also show that the distribution of the forms of phosphorus changed with successional stage. The change in distribution and the increased biological demand for phosphorus that paralleled succession were mediated by the activity of phosphatase enzymes.     

Strontium isotope evolution of Late Permian and Triassic seawater

The ⁸⁷Sr/⁸⁶Sr values based on brachiopods and conodonts define a nearly continuous record for the Late Permian and Triassic intervals. Minor gaps in measurements exist only for the uppermost Brahmanian, lower part of the Upper Olenekian, and Middle Norian, and only sparse data are available for the Late Permian. These 219 measurements include 67 brachiopods and 114 conodont samples from the Tethyan realm as well as 37 brachiopods and one conodont sample from the mid-European Middle Triassic Muschelkalk Sea. The Late Permian/Lower Triassic interval is characterized by a steep 1.3 × 10⁻³ rise, from 0.7070 at the base of the Dzhulfian to 0.7082 in the late Olenekian, a rate of change comparable to that in the Cenozoic. In the mid-Triassic (Anisian and Ladinian), the isotope values fall to 0.7075, followed again by a rise to 0.7081 in the Middle/Late Norian. The ⁸⁷Sr/⁸⁶Sr values decline again in the Late Norian (Sevatian) and Rhaetian to 0.7076.The sharp rise in the ⁸⁷Sr/⁸⁶Sr values during the Late Permian/Early Triassic was coincident with widespread clastic sedimentation. Because of the paucity of tectonic uplifts, the enhanced erosion may have been due to intermittent humid phases, during mainly an arid interval, coupled with the absence of a dense protective land plant cover following the mass extinction during the latest Permian. The apex of the ⁸⁷Sr/⁸⁶Sr curve at the Olenekian/Anisian boundary coincides with cessation of the large-scale clastic sedimentation and also marks the final recovery of land vegetation, as indicated by the renewed onset of coal formation in the Middle Triassic. The rising ⁸⁷Sr/⁸⁶Sr values from the Middle Carnian to the Late Norian coincide with the uplift and erosion of the Cimmeride-Indosinian orogens marking the closure of the Palaeotethys. The subsequent Rhaetian decline that continues into Jurassic (Pliensbachian/Toarcian boundary), on the other hand, coincides with the opening of the Vardar Ocean and its eastern continuation in the Izmir-Ankara Ophiolitic Belt.Samples from the Upper Muschelkalk are more radiogenic than the global trend. This may reflect separation of the basin from the open ocean. Due to strong meteoric influx from a large land mass in the north, the Germanic Basin became increasing brackish up section in the north and east, but because of the high evaporation rates, the salt content was not much reduced in the southern and central basin where a rich, but increasingly endemic, marine fauna survived.     

Finite element simulation of seawater intrusion into a quarry-site coastal aquifer,Kocaeli-Darıca,Turkey

A numerical simulation has been carried out to investigate the effects of below-sea-level (b.s.l.) excavation on the raw material quality of a cement quarry in Turkey. The model simulates variations in the hydrodynamic and hydrogeochemical mechanisms in the coastal aquifer upon BSL excavation. In this context, behavior of the seawater intrusion zone, changes in water levels, and salt concentrations have been simulated. In the development of the model, previous geological and hydrogeological reports of the quarry site and the near vicinity have been considered. Eleven new wells (BH-1,...BH-11) have been drilled to reveal hydrogeological features of the area and also for periodical observations of the water levels and hydrogeochemical monitoring. These wells were utilized to develop and calibrate the model to the field conditions. Physical and hydrogeochemical parameters used in the model have been evaluated using available hydrogeological data, the field test results and the related literature. The model has been verified using the field observations. It is based on the virgin conditions of the aquifer as well as on the data for years 1990 and 2001. An average raw material production rate for the cement factory was considered during development of the model, and for making future predictions. Two alternative production scenarios have been considered and probable effects of above-sea-level (a.s.l.) and b.s.l. excavations on seawater intrusion into the aquifer have been studied. Future prediction studies are based on these two production scenarios that assume 43 years of total production (30 years of a.s.l. and 13 years of b.s.l. production) in the quarry. The first scenario, Scenario I, assumes that starting from 2001, the next 30 years would be devoted only to ASL and then the remaining 13 years would be used for b.s.l. production. Scenario II, on the other hand, assumes simultaneous operations both at a.s.l. and b.s.l. levels for the next 43 years after 2001. Effects of b.s.l. production in the quarry site have been simulated accordingly, and seawater intrusion into the aquifer as well as water discharge rates have been predicted for –10, –20 and –30 m production levels.