Quaternary evolution of the Gulf of İzmit (NW Turkey): a sedimentary basin under control of the North Anatolian Fault Zone

The Quaternary evolution of the Gulf of İzmit, situated on the tectonically active North Anatolian Fault Zone (NAFZ), was investigated using seismic reflection, paleontologic, and sediment textural data. On the basis of seismic stratigraphic and sedimentologic-paleontologic interpretations, four depositional units were distinguished within the Plio-Quaternary sequence of the Gulf of İzmit. According to these data, Plio-Quaternary deposits supplied from the northern terrestrial area started to accumulate during a progradational phase, in a south-facing half-graben. A coarse-grained sedimentary unit prograding into the gulf from the south since 200 ka b.p. indicates a dramatic variation in the evolution of the gulf, with the initiation of a new strike-slip fault of the NAFZ and a corresponding uplift of the Armutlu Peninsula in the south of the gulf. During the evolution of this fault from a wide shear zone consisting of right-stepped strike-slip faults and pull-apart basins to a localized principal fault zone, sediments were deposited under the influence of northerly prograding terrestrial and shallow-marine conditions due to relative sea-level fluctuations in the Marmara Sea. During this period, the Gulf of İzmit was invaded mainly by Mediterranean and partly by Black Sea waters. In the latest glacial period, shallow areas in the gulf became subaerially exposed, whereas the central and western sub-basins of the gulf turned into lakes. The present evolution of the Gulf of İzmit is controlled by the after effects of the new rupture of the NAFZ and the estuarine nature of the gulf environment.     

The effects of vehicular and pedestrian traffic on dune vegetation in South Africa

The effects of varying intensities of off-road vehicle and pedestrian traffic on vegetation height and percent-cover were investigated at two sites representing pioneer and climax dune shrubland communities in South African dune systems. In all cases, a decreasing trend in vegetation height and percentage cover subsequent to application of the treatments was evident, although this was more clear in the shrub than in the pioneer community. The impact on vegetation variables increased with increasing intensity of vehicle and pedestrian treatments. Vehicles driven along a curved path resulted in greater vegetation destruction than those driven along a straight path. High intensity (single application) treatments resulted in an initial decrease in vegetation height and cover immediately after the impact, which was followed by a further decline over the next 3 months. This two-step response was attributed to the subsequent gradual death of the vegetation which was not evident immediately following the impact. Due to their faster growth rate, pioneer dune communities appear to have the capacity to recover following impacts, while dune shrub communities tend to be more vulnerable, exhibiting signs of damage for longer periods. The results of this study have value for managers of coastal dune systems, particularly those impacted by human recreational activities.     

Sublethal effects of oiled sediment on the sand worm, Nereis (neanthes) virens: Induced changes in burrowing and emergence

The burrowing and emergence behavior of sand worms, Nereis (Neanthes) virens Sars, in sediment contaminated with sublethal concentrations of Prudhoe Bay crude oil ranging from 74 to 5222 ppm, was studied in the laboratory. Initial burrowing in oiled sediment did not differ from that observed in unoiled sediment. Emergence of exposed worms was related to the oil concentration and the extent of weathering of oiled sediment. Sand worms buried in unoiled sediment did not emerge. Worms dug from oiled sediment after 12 hours' exposure and placed on unoiled sediment were impaired, resulting in a significant increase in time to burrow. However, after 12h, they recovered and burrowed at normal rates. Worms held in oiled sediment for 96 h also recovered. Possible causes for recovery are discussed. Results suggest that oil-induced aberrations may increase vulnerability to predation.     

Trace metal composition of colloidal organic material in marine environments

Marine colloidal material (1 kDa–0.2 μm) was isolated by cross-flow ultrafiltration followed by diafiltration and freeze-drying from surface waters of the Gulf of Mexico and the Middle Atlantic Bight (MAB), as well as from estuarine waters of Galveston Bay. Elemental characterization of isolated colloidal material included organic carbon (OC) and selected trace metal (Cu, Pb, Zn, Cd, Co, Ni, Cr, Be, Fe, Al, Mn, V, Ba, and Ti) determinations. It was found that levels of these metals in marine colloids ranged from <0.1 to 50 μg/g colloidal matter, except for Fe which generally had a concentration >120 μg/g. Most metals (Cu, Pb, Zn, Ni, Al, Mn, V, and Ti) had an average concentration >1 μg/g while concentrations of Cd, Co and Be were usually <1 μg/g. Metal concentrations (μg/g) in isolated colloids were, in general, higher in Galveston Bay than in the Gulf of Mexico, suggesting either high abundance of trace metals in estuarine waters or differences in organic matter composition. Higher colloidal metal concentrations in the MAB than in the Gulf of Mexico might be due to higher terrestrial inputs in the MAB. Colloidal metal concentrations (μg/g) were generally lower than those in average soils, continental crust and suspended particles. However, metal/aluminum ratios (Me/Al) in isolated marine colloids were significantly higher than those for average soils and continental crust. Most importantly, colloids had a metal composition and metal/OC ratio (Me/C) similar to humic substances and marine plankton, suggesting that marine colloids largely originate from planktonic sources and are composed of predominately organic components. The Me/C ratios of Galveston Bay colloids followed the sequence of Cu>Ni, Cr, Zn>Mn>Co>Pb, Cd, which is similar to the Irving–Williams order except for Mn, suggesting that the interaction of metals with marine colloids is determined by the affinity of metals for specific organic ligands.     

Optimum design of a servo-controlled breathing regulator for underwater divers

This article deals with the analysis, synthesis and performance evaluation of the flow and dynamic characteristics of the new class of servo-controlled breathing regulators for underwater divers.Emphasis on such a class of regulators has been stimulated by their tremendous potential in extending the dive depth and duration because they reduce the diver breathing effort to a great extent. This would eliminate the unnecessary exhaustion of the diver under such extreme diving conditions and accordingly improve his work efficiency underwater.The study aims at developing rational design procedures and guides that would enable the regulator designers to select the optimal design parameters of this class of regulators. Such design guides are based on the analysis of the flow and dynamic characteristics of the servo-controlled regulator as well as the basic principle of the theory of optimum control.The study presents also experimental evaluation techniques of the dynamic characteristics of this class of regulators in order to provide common quantitative means for comparison with the conventional regulator designs.The presented results emphasize the merits and the potential of the servo-controlled regulators as essential tools of supporting the life of divers underwater.     

Semisubmersible response to transient ice forces

The paper presents an analytical and experimental study on the transient response of semisubmersibles to bergybit impact and the strength of bergybit ice to high strain-rate loadings. Two approaches have been proposed for the solution of the semisubmersible-bergybit interaction problem, one using the energy approach and the other using the conventional structural dynamics approach with initial velocity conditions. In addition the local behaviour of the impacted regions have been analysed for deformation and failure. Numerical results have been given for local behaviour of an impacted column and global behaviour of semisubmersible-bergybit system. Experimental study has been reported on the impact strength of iceberg ice at strain rates of 10⁻³, 10⁻² and 10⁻¹; the indentation impact strength of ice is found to be 3–4 times the unaixial compressive strength, at the same strain rate.     

Production of the Crab Elamenopsis kempiHymenosomatidae in the Garmat-Ali Region, Basrah, Iraq

Abstract. The production of the hymenosomatid crab Elamenopsis kempi was calculated for a period of 18 months from a subtidal area of the Garmat-Ali river, southern Iraq. The highest average individual somatic energy was attained in spring. Maximum population biomass and production were attained by the summer cohort and the minimum values were exhibited by the overwintering cohort. The fluctuations of the average population biomass were followed throughout the sampling period. Average total annual population production was 13.2 g DW · m^-2· a^-1 and the P/B ratio was 5.9. These values were compared with those of the most common crustaceans in the region.     

Dissolved aluminium and the silicon cycle in the Arctic Ocean

Concentrations of dissolved (0.2 µm filtered) aluminium (Al) have been determined for the first time in the Eurasian part of the Arctic Ocean over the entire water column during expedition ARK XXII/2 aboard R.V. Polarstern (2007). An unprecedented number of 666 samples was analysed for 44 stations along 5 ocean transects. Dissolved Al in surface layer water (SLW) was very low, close to 1 nM, with lowest SLW concentrations towards the Canadian part of the Arctic Ocean and higher values adjacent to and in the shelf seas. The low SLW concentrations indicate no or little influence from aeolian dust input. Dissolved Al showed a nutrient-type increase with depth up to 28 nM, but large differences existed between the different deep Arctic basins. The differences in concentrations of Al between water masses and basins could largely be related to the different origins of the water masses. In the SLW and intermediate water layers, Atlantic and Pacific inflows were of importance. Deep shelf convection appeared to influence the Al distribution in the deep Eurasian Basin. The Al distribution of the deep Makarov Basin provides evidence for Eurasian Basin water inflow into the deep Makarov Basin. A strong correlation between Al and Silicon (Si) was observed in all basins. This correlation and the nutrient-like profile indicate a strong biological influence on the cycling and distribution of Al. The biological influence can be direct by the incorporation of Al in biogenic silica, indirect by preferential scavenging of Al onto biogenic siliceous particles, or by a combination of both processes. From the slope of the overall Al–Si relationship in the intermediate water layer (AIDW; ~ 200–2000 m depth), an Al/Si ratio of 2.2 atoms Al per 1000 atoms Si was derived. This ratio is consistent with the range of previously reported Al/Si uptake ratio in biogenic opal frustules of diatoms. In the deepest waters (>2000 m depth) a steeper slope of the Al–Si relationship of 7.4 to 13 atoms Al per 1000 atoms Si likely results from entrainment of cold shelf water into the deep basins, carrying the signal of dissolution of terrigenous particles with a much higher Al:Si ratio of crustal abundance. Only a small enrichment with such crustal Al and Si component may readily account for the higher Al:Si slope in the deepest waters.     

Petroleum composition in the Cuu Long Basin (Mekong Basin) offshore southern Vietnam

The Cuu Long Basin (Mekong Basin) is a rift basin off southern Vietnam, and the most important petroleum producing basin in the country. However, information on petroleum type and characteristics has hitherto been largely unavailable to the public. This paper presents petroleum geochemical data on nine oil samples from four different producing fields in the Cuu Long Basin: the Dragon (Rong), Black Lion (Sutu-Den), Sunrise (Rang ?ong) and White Tiger (Bach Ho) Fields. The oils are highly paraffinic with bimodal normal alkane distributions and show moderate pristane to phytane ratios and a conspicuous hyperbolic decrease in abundance with increasing carbon number of hopane homologues from C₃₀ to C₃₅. The TPP-index of Holba et al. (Holba, A.G., Dzou, L.I., Wood, G.D., Ellis, L., Adam, P., Schaeffer, P., Albrecht, P., Greene, T., Hughes, W.B., 2003. Application of tetracyclic polyprenoids as indicators of input from fresh–brackish water environments. Organic Geochemistry 34, 441–469) is equal to 1 in all samples which in combination with tricyclic triperpane T26/T25 ratios >1 and the n-alkane and hopane distributions mentioned above provide a strong indication of an origin from lacustrine source rocks. This is supported by the absence of marine C₃₀ desmethyl steranes (i.e. 24-n-propylcholestanes) and marine diatom-derived norcholestanes. Based on the overall biological marker distributions, the lakes probably belonged to the overfilled or balanced-fill types defined by Bohacs et al. (Bohacs, K.M., Carroll, A.R., Neal, J.E., Mankiewicz, P.J., 2000. Lake-basin type, source potential, and hydrocarbon character. An integrated sequence-stratigraphic–geochemical framework. AAPG Studies in Geology 46, 3–34). The oils were generated from source rocks at early- to mid-oil-window maturity, presumably Oligocene lacustrine shales that are present in the syn-rift succession. Oils from individual fields may, however, be distinguished by a combination of biological marker parameters, such as the oleanane index, the gammacerane index, the relative abundance of tricyclic terpanes, the proportions of diasteranes and 28-norspergulane, complemented by other parameters. The oils of the Cuu Long Basin show an overall similarity to the B-10 oil from the Song Hong Basin off northern Vietnam, but are markedly different from the seepage oils known from Dam Thi Nai on the coast of central Vietnam.