Mitigation of lunar dust adhesion by surface modification

Dust has been recognized as one of the greatest hazards in continued lunar exploration due to its tenacious adhesion to everything with which it comes into contact. Unfortunately, there is little known about the mechanisms of adhesion on widely varying surface types: van der Waals and electrostatic forces are the dominant forces under consideration here. Surface energy, roughness, mechanical properties and electronic properties are all known to contribute to the adhesion characteristics. An optimal solution to mitigate dust adhesion would be to identify the dominant components of the adhesive force and to reduce that force by surface modification. In this study, an ion beam process was used to modify (treat) the surfaces of three dramatically different materials spanning the range of conductor (black Kapton), semiconductor (silicon), and insulator (quartz). Adhesive forces between less than JSC-1 lunar simulants and these virgin/treated surfaces were measured in vacuum using a centrifugal force detachment method. We found that JSC-1 particles adhered less to treated silicon and quartz surfaces, correlated with a reduction in van der Waals force due to a reduced surface energy. The large reduction in adhesion for treated black Kapton is mainly due to the large decrease in the electrostatic (image) force that results from reduced contact charging. Materials in space and on the lunar surface will be directly exposed to high-energy ultraviolet radiation prior to being covered by dust, so the UV irradiation effects on surface adhesion were also examined. Both virgin and treated quartz surfaces are most affected by the UV-irradiation, showing dramatically increased adhesion.     

Zircon U-Pb geochronology and geochemistry of Late Devonian–Carboniferous granitoids in NW Iran: implications for the opening of Paleo-Tethys

ABSTRACT

We present zircon U-Pb crystallization ages combined with bulk rock major and trace element geochemistry and Sr-Nd-Pb and zircon in-situ Hf isotopic compositions of the Amand and Moro granitoid intrusions in northwest Iran. The Amand and Moro plutons include granite and syeno-diorite with LA-ICP-MS U-Pb zircon ages of 367 ± 6.8 Ma and 351 ± 1.3 Ma, respectively, representative of Late Devonian-Early Carboniferous magmatic activity in NW Iran. Geochemical characteristics such as typical enrichments in alkalis, Nb, Zr, Ga and Y, depletion in P and Sr and fractionated REE patterns with high Ga/Al ratios and Eu negative anomalies are consistent with A-type magmatic signatures. The granitoids are classified as A₂-type and within-plate granitoids. The bulk rock geochemistry (enrichments in Th, Nb and, high Th/Yb, Zr/Y ratios) along with low variation of ¹⁴³Nd/¹⁴⁴Nd_(i) and ⁸⁷Sr/⁸⁶Sr_(i) ratios and positive zircon εHf_(t) support the role of a mantle plume component for the evolution of the Amand and Moro A-type granitoids in an extensional tectonic environment. In fitting with wider regional knowledge, this magmatism occurred during Paleo-Tethys opening in northern Gondwana.     

Fragmentation during Rock Falls: Two Italian Case Studies of Hard and Soft Rocks

In recent years, rock fall phenomena in Italy have received considerable attention for risk mitigation through in situ observations and experimental data. This paper reports the study conducted at Camaldoli Hill, in the urban area of Naples, and at Monte Pellegrino, Palermo, Italy. The rocks involved are volcanic Neapolitan yellow tuff (NYT) in the former area and dolomitic limestone in the latter. Both rocks, even though with different strength characteristics, have shown a significant tendency towards rock fragmentation during run out. This behavior was first investigated by comparing the volumes of removable blocks on the cliff faces (V ₀) and fallen blocks on the slopes (V _f). It was assumed that the ratio V _f/V ₀ decreases with the distance (x _f) from the detachment area by an empirical law, which depends on a coefficient α, correlated with the geotechnical properties of the materials involved in the rock fall. Finally, this law was validated by observation of well-documented natural rock falls (Palermo) and by in situ full-scale tests (Naples). From the engineering perspective, consideration of fragmentation processes in rock fall modeling provides a means for designing low-cost mitigation measures.     

Distribution and source apportionments of polychlorinated biphenyls (PCBs) in mariculture sediments from the Pearl River Delta, South China

Surface and core sediments collected from six mariculture farms in the Pearl River Delta (PRD) were analyzed to evaluate contamination levels of polychlorinated biphenyls (PCBs). The ∑PCBs (37 congeners) concentrations ranged from 5.10 to 11.0 ng g(-1) (mean 7.96 ng g(-1)) in surface and 3.19 to 22.1 ng g(-1) (mean 7.75 ng g(-1)) in core sediments, respectively. The concentrations were significantly higher than that measured in the sediments of their corresponding reference sites, whereby the average enrichment percentages were 62.0% and 42.7% in surface and core sediments, respectively. Significant correlations (R2=0.77, p<0.05) of PCB homologue group proportions between fish feeds and surface mariculture sediments suggested that fish feed input was probably the main source for the enrichment of PCBs. Due to the fact that PCBs could be transferred along food chains, PCB contamination in fish feeds and mariculture sediments should not be overlooked.     

Deglacial to postglacial palaeoenvironments of the Celtic Sea: lacustrine conditions versus a continuous marine sequence

Recent work on the last glaciation of the British Isles has led to an improved understanding of the nature and timing of the retreat of the British?Irish Ice Sheet (BIIS) from its southern maximum (Isles of Scilly), northwards into the Celtic and Irish seas. However, the nature of the deglacial environments across the Celtic Sea shelf, the extent of subaerial exposure and the existence (or otherwise) of a contiguous terrestrial linkage between Britain and Ireland following ice retreat remains ambiguous. Multiproxy research, based on analysis of 12 BGS vibrocores from the Celtic Deep Basin (CDB), seeks to address these issues. CDB cores exhibit a shell‐rich upward fining sequence of Holocene marine sand above an erosional contact cut in laminated muds with infrequent lonestones. Molluscs, in situ Foraminifera and marine diatoms are absent from the basal muds, but rare damaged freshwater diatoms and foraminiferal linings occur. Dinoflagellate cysts and other non‐pollen palynomorphs evidence diverse, environmentally incompatible floras with temperate, boreal and Arctic glaciomarine taxa co‐occurring. Such multiproxy records can be interpreted as representing a retreating ice margin, with reworking of marine sediments into a lacustrine basin. Equally, the same record may be interpreted as recording similar conditions within a semi‐enclosed marine embayment dominated by meltwater export and deposition of reworked microfossils. As assemblages from these cores contrast markedly with proven glaciomarine sequences from outside the CDB, a glaciolacustrine interpretation is favoured for the laminated sequence, truncated by a Late Weichselian transgressive sequence fining upwards into fully marine conditions. Reworked rare intertidal molluscs from immediately above the regional unconformity provide a minimum date c. 13.9 cal. ka BP for commencement of widespread marine erosion. Although suggestive of glaciolacustrine conditions, the exact nature and timing of laminated sediment deposition within the CDB, and the implications this has on (pen)insularity of Ireland following deglaciation, remain elusive.     

Hercynian subduction-related processes within the metamorphic continental crust in Calabria (southern Italy)

Linking the deformation history of mylonitized continental rocks to the progress of devolatilization reactions that trigger reaction softening is critical for the understanding of crustal scale processes. We have analysed the field geometries and microstructures of deformed rocks within the southern Hercynian belt in Calabria, as well as modelled the pressure–temperature–deformation (P–T–d) trajectory of a main ductile shear zone that tectonically coupled the deeper crustal Mammola Paragneiss Unit with the upper crustal Stilo–Pazzano Phyllite Unit. P–T modelling of the mylonitic Mammola Paragneiss Unit was performed through calculation of phase equilibrium diagrams with the software thermocalc in the MnNCKFMASHTO model system. The prograde P–T–d trajectory is based on the zoning profiles of garnet porphyroblasts and their mineral inclusions, primarily barroisite and epidote. P–T modelling shows that peak metamorphic conditions of ~0.9 GPa and 585°C were reached during a D_n-1 under-thrusting event. The following exhumation during the D_n mylonitic event, and contact metamorphism during D_n+1 and D_n+2 folding events, have also been modelled because they are essential to restore the previous tectono-metamorphic history. The exhumation trajectory was modelled down to 0.3 GPa with temperatures of 440–460°C, under fluid-deficient conditions, as well as the final late Carboniferous contact metamorphism up to T_max of 680–720°C. The prograde path shows clear evidence for thermal buffering during garnet growth at the expense of chlorite, with a heating-dominated stage after chlorite breakdown. Subsequently, a rheological change associated with epidote breakdown (i.e. reaction softening) occurred, highlighted by a net steepening of the P/T trajectory towards the pressure peak. On the basis of the barroisite inclusions within garnet porphyroblasts as well as the ‘hairpin’ shape of the reconstructed P–T–d path (before contact metamorphism), we infer that the unusual low T/P gradient for the Hercynian crust exposed in the Mammola Paragneiss Unit records its involvement in the Palaeotethys–Gondwana subduction beneath Laurussia during D_n-1 under-thrusting. We present a new palaeotectonic interpretation along the southern Hercynian belt in Calabria during the Upper Mississippian–Lower Pennsylvanian, that is consistent with previous geochronology studies.     

Biogeographical drivers of ragweed pollen concentrations in Europe

Theoretical and Applied Climatology - The drivers of spatial variation in ragweed pollen concentrations, contributing to severe allergic rhinitis and asthma, are poorly quantified. We analysed the...     

Beyond headline mitigation numbers: we need more transparent and comparable NDCs to achieve the Paris Agreement on climate change

Nationally determined contributions (NDCs) were key to reaching the Paris Agreement and will be instrumental in implementing it. Research was quick to identify the ‘headline numbers’ of NDCs: if these climate action plans were fully implemented, global mean warming by 2100 would be reduced from approximately 3.6 to 2.7°C above pre-industrial levels (Höhne et al. Climate Pol 17:1–17, 2016; Rogelj et al. Nature 534:631–639, 2016). However, beyond these headline mitigation numbers, NDCs are more difficult to analyse and compare. UN climate negotiations have so far provided limited guidance on NDC formulation, which has resulted in varying scopes and contents of NDCs, often lacking details concerning ambitions. If NDCs are to become the long-term instrument for international cooperation, negotiation, and ratcheting up of ambitions to address climate change, then they need to become more transparent and comparable, both with respect to mitigation goals, and to issues such as adaptation, finance, and the way in which NDCs are aligned with national policies. Our analysis of INDCs and NDCs (Once a party ratifies the Paris Agreement, it is invited to turn its Intended Nationally Determined Contribution (INDC) into an NDC. We refer to results from our INDC analysis rather than our NDC analysis in this commentary unless otherwise stated.) shows that they omit important mitigation sectors, do not adequately provide details on costs and financing of implementation, and are poorly designed to meet assessment and review needs.