Turbulence mechanisms at an agricultural site

An extensive set of turbulence data from the 3- and 12-m heights taken over an agricultural site (Marsta, Sweden) are analyzed and compared with data from ideal sites.In unstable air, Monin-Obukhov similarity is found to be valid for the non-dimensional gradients of wind, _m , temperature, _h , and humidity, _e , for (only a few data), for _T /|T _*|,/ _E /|E _*| and for the non-dimensionalized inertial subrange spectra of temperature and humidity. Where comparison is possible, the unstable data also agree with those found in the Kansas study, with one remarkable exception, the inertial subrange constant of the temperature spectrum, ₁, being only 0.39, compared to the value 0.80 found at the Kansas site.On the stable side, most similarity predictions break down, with most of the data differing systematically from the corresponding Kansas results, the only exception being . The inertial subrange constants for temperature, ₁, and for humidity, ₁ are found to have the same values, 0.39 and 0.30, respectively, as they do on the unstable side. Remarkable similarity is found for the shape of the stable u- and - and e-spectra. In addition, this shape is found to be identical with that found in Kansas. The peak wavelength of the stable u-, and -spectra is found to be about four times larger than it is for the corresponding Kansas spectra. This is interpreted to be a result of the increased macro-roughness at the Marsta site as compared with that at the Kansas site. A possible explanation for the low ₁-value is discussed, suggesting that ₁ is not a universal constant, but instead dependent on the turbulent structure.     

Fabrication of synthetic calcite–muscovite rocks with variable texture — An analogue to cataclasite fabrics?

A series of large diameter calcite–muscovite aggregates has been prepared from calcite and muscovite powders, in order to gain a better understanding of how texture develops in impure carbonate rocks. The development of the microstructure and the crystallographic preferred orientation (CPO, texture) during the preparation process is described. The synthetic rocks have been fabricated from powders of calcite and muscovite by uniaxial cold-pressing at loads up to 400 MPa and subsequent hot isostatic pressing (HIPping) at pressures of 150 to 170 MPa and a temperature of 670 °C. The resulting textures and microstructures are homogeneous throughout the samples. The calcite CPO is generated by rigid body rotation and twinning during cold-pressing and is not significantly altered by recrystallization during HIPping. Grain growth during HIPping is observed in pure calcite samples, but is inhibited through high porosity and the presence of muscovite in the mixed aggregates. The preferred orientation of the calcite c-axes is found to increase with increasing uniaxial cold pressure, and to be independent of the muscovite content. The magnetic bulk susceptibility of the starting material has been changed by the formation of ferromagnetic impurities during fabrication. Comparison of the samples to natural calcite fabrics from fault zones show the potential of the experiments and fabric analyses presented to analyze and to better understand the deformation mechanisms of fault zones.     

Soil carbon storage following road removal and timber harvesting in redwood forests

Soil carbon storage plays a key role in the global carbon cycle and is important for sustaining forest productivity. Removal of unpaved forest roads has the potential for increasing carbon storage in soils on forested terrain as treated sites revegetate and soil properties improve on the previously compacted road surfaces. We compared soil organic carbon (SOC) content at several depths on treated roads to SOC in adjacent second‐growth forests and old‐growth redwood forests in California, determined whether SOC in the upper 50 cm of soil varies with the type of road treatment, and assessed the relative importance of site‐scale and landscape‐scale variables in predicting SOC accumulation in treated road prisms and second‐growth redwood forests. Soils were sampled at 5, 20, and 50 cm depths on roads treated by two methods (decommissioning and full recontouring), and in adjacent second‐growth and old‐growth forests in north coastal California. Road treatments spanned a period of 32 years, and covered a range of geomorphic and vegetative conditions. SOC decreased with depth at all sites. Treated roads on convex sites exhibited higher SOC than on concave sites, and north aspect sites had higher SOC than south aspect sites. SOC at 5, 20, and 50 cm depths did not differ significantly between decommissioned roads (treated 18–32 years previous) and fully recontoured roads (treated 2–12 years previous). Nevertheless, stepwise multiple regression models project higher SOC developing on fully recontoured roads in the next few decades. The best predictors for SOC on treated roads and in second‐growth forest incorporated aspect, vegetation type, soil depth, lithology, distance from the ocean, years since road treatment (for the road model) and years since harvest (for the forest model). The road model explained 48% of the variation in SOC in the upper 50 cm of mineral soils and the forest model, 54%. Copyright © 2015 John Wiley & Sons, Ltd.     

The predictability of near-coastal currents using a baroclinic unstructured grid model

A limited domain, coastal ocean forecast system consisting of an unstructured grid model, a meteorological model, a regional ocean model, and a global tidal database is designed to be globally relocatable. For such a system to be viable, the predictability of coastal currents must be well understood with error sources clearly identified. To this end, the coastal forecast system is applied at the mouth of Chesapeake Bay in response to a Navy exercise. Two-day forecasts are produced for a 10-day period from 4 to 14 June 2010 and compared to real-time observations. Interplay between the temporal frequency of the regional model boundary forcing and the application of external tides to the coastal model impacts the tidal characteristics of the coastal current, even contributing a small phase error. Frequencies of at least 3 h are needed to resolve the tidal signal within the regional model; otherwise, externally applied tides from a database are needed to capture the tidal variability. Spatial resolution of the regional model (3 vs 1 km) does not impact skill of the current prediction. Tidal response of the system indicates excellent representation of the dominant M ₂ tide for water level and currents. Diurnal tides, especially K ₁, are amplified unrealistically with the application of coarse 27-km winds. Higher-resolution winds reduce current forecast error with the exception of wind originating from the SSW, SSE, and E. These winds run shore parallel and are subject to strong interaction with the shoreline that is poorly represented even by the 3-km wind fields. The vertical distribution of currents is also well predicted by the coastal model. Spatial and temporal resolution of the wind forcing including areas close to the shoreline is the most critical component for accurate current forecasts. Additionally, it is demonstrated that wind resolution plays a large role in establishing realistic thermal and density structures in upwelling prone regions.     

Triassic stretching directions in Iberia and North Africa inferred from magnetic fabrics

During the Triassic, Iberia and western North Africa displayed a unique situation in relation with the Central and North Atlantic opening and westward expansion of the Tethys. Unravelling the stretching direction in Triassic deposits of the studied area can help in our understanding of this scenario. The tectonic setting is characterized by localized basins with strong thickness variations greatly influenced by previous post‐Variscan mechanical discontinuities. In this work, we revise and compile magnetic fabric data from eight Triassic depocentres in terms of defining the stretching direction (i.e. magnetic lineation), resulting from extensional deformation of this period. Data show the importance of the opening of the Atlantic rift as the leading process during the Triassic. Dextral transtension can explain the deflection of the extensional direction observed in most studied depocentres that is caused by the activity of previous major oblique faults.     

Composition and properties of the iron hydroxides-cemented lenses in Estonian sandstone of Middle Devonian age

The formation of hematite and goethite concretions in different sedimentary rocks including sandstones is an important diagenetic process in the geologic history of the Earth. Its interpretation can also contribute to understanding the diagenetic history of Martian iron hydroxide concretions. A case study of iron-rich concretions from Estonian Middle Devonian sandstones exposed in ancient river valleys in southeastern Estonia was carried out based on the results of mineralogical, petrographical, geochemical, petrophysical and magnetic analyses. It was found that the high Fe₂O₃(total) content (25.0–39.5%), high magnetic susceptibility, bulk and grain density, very low porosity, corrosion and fracturing of the quartz grains of the platy iron concretions are in contrast with properties of the Devonian host sandstones. However the ferrous iron content (measured as FeO) of iron-rich concretions was as low as in the other Devonian rocks, suggesting an oxidizing environment and arid climate during the cementation by iron-hydroxides. The fracturing of quartz grains cemented by iron hydroxides could take place at near-surface conditions including vadose and phreatic zones in arid climate with high evaporation rates. Such climatic conditions have been reported for the Baltic region during Devonian, Upper Permian and Triassic times. We have found that goethite is prevalent in the cement, replacing clay and carbonate minerals. We assume that this iron-rich cement is originated from the mobilization of iron in host sandstones by groundwater, associated with tectonic activity at the end of the Middle Devonian, evidenced by fracturing in Devonian outcrops and caves. Although this mobilization could occur under reducing conditions, precipitation of goethite and hematite for the cementation could take place in oxidizing environment along bedding planes close to the surface during short sedimentation breaks. Another possible time for the formation of iron concretions could be Permian, under the condition of both arid climate and tectonic activity.     

Macrofaunal nematodes of the deep Whittard Canyon (NE Atlantic): assemblage characteristics and comparison with polychaetes

Large nematodes form an important component of deep‐sea macrofaunal assemblages, but are often considered to be part of the meiobenthos and are rarely studied. We analysed the standing stocks, diversity, and functional group and genus‐level composition of macrofaunal nematodes at lower bathyal depths (3,500 m water depth) in the Whittard Canyon system (NE Atlantic) and on the adjacent continental slope. Five replicate sample sets were obtained using a Megacorer, at four locations (three canyon branches, one slope). Sediment samples were processed on a 500‐μm mesh to provide both nematode and polychaete data from the same samples. The dominant nematode genera included Paramesacanthion, Metacylicolaimus, Cylicolaimus and Phanodermopsis. Nematode standing stocks (density and biomass) increased significantly from slope to canyon locations. Similarly, nematode dominance increased substantially (and diversity decreased) from slope to canyon locations. Nematode feeding groups and tail shape groups also appeared to exhibit common trends across study locations. Nematode genus‐level faunal composition varied significantly between slope and canyon locations. We describe and discuss the broadly similar trends detected in the matching polychaete data, noting some differences in the polychaete density and diversity responses. We suggest that the similar trends in macrofaunal nematode and polychaete ecology across our four study locations reflect responses to both changing sedimentology and food availability.     

Overcoming disciplinary solitude: The archaeology and geology of native copper in Eastern North America

Although native copper has attracted the scholarly attention of both geologists and archaeologists since the middle of the 19th century, it is only recently that native copper studies have benefited from interdisciplinary research. This history of disciplinary solitude can be traced to the professionalization of the two fields in the early 20th century, an era in which crossdisciplinary communication began to wane. The effects of this phenomena resulted in the development of a model of aboriginal native copper procurement by archaeologists that did not take into account the geological literature, which had long identified numerous—rather than a single—source of native copper in North America. In this article, the author discusses how this disciplinary solitude developed and how it resulted in the creation of a dominant model for native copper procurement that constrained our understanding of aboriginal lifeways for generations. The author also considers how increasing collaboration between geologists and archaeologists since the 1970s has led to the reevaluation of an old model of native copper procurement that has been uncritically accepted by most archaeologists for over a century and a half. © 2007 Wiley Periodicals, Inc.