Flow separation at the inner (convex) and outer (concave) banks of constant‐width and widening open‐channel bends

There is a paucity of data and insight in the mechanisms of, and controls on flow separation and recirculation at natural sharply‐curved river bends. Herein we report on successful laboratory experiments that elucidate flow structure in one constant‐width bend and a second bend with an outer‐bank widening. The experiments were performed with both a flat immobile gravel bed and mobile sand bed with dominant bedload sediment transport. In the constant‐width bend with immobile bed, a zone of mainly horizontal flow separation (vertical rotational axis) formed at the inner bank that did not contain detectable flow recirculation, and an outer‐bank cell of secondary flow with streamwise oriented rotational axis. Surprisingly, the bend with widening at the outer bank and immobile bed did not lead to a transverse expansion of the flow. Rather, flow in the outer‐bank widening weakly recirculated around a vertical axis and hardly interacted with the inner part of the bend, which behaved as a constant‐width bend. In the mobile bed experiment, downstream of the bend apex a pronounced depositional bar developed at the inside of the bend and pronounced scour occurred at the outside. Moreover the deformed bed promoted flow separation over the bar, including return currents. In the constant‐width bend, the topographic steering impeded the generation of an outer‐bank cell of secondary flow. In the bend with outer‐bank widening, the topographic steering induced an outward expansion of the flow, whereby the major part of the discharge was conveyed in the central part of the widening section. Flow in the outer‐bank widening was highly three dimensional and included return currents near the bottom. In conclusion, the experiments elucidated three distinct processes of flow separation common in sharp bends: flow separation at the inner bank, an outer‐bank cell of secondary flow, and flow separation and recirculation in an outer‐bank widening. Copyright © 2012 John Wiley & Sons, Ltd.     

Ejection behavior characteristics in experimental cratering in sandstone targets

Abstract– Within the frame of the MEMIN research unit (Multidisciplinary Experimental and Numerical Impact Research Network), impact experiments on sandstone targets were carried out to systematically study the influence of projectile mass, velocity, and target water saturation on the cratering and ejection processes. The projectiles were accelerated with two‐stage light‐gas guns (Ernst‐Mach‐Institute) onto fine‐grained targets (Seeberger sandstone) with about 23% porosity. Collection of the ejecta on custom‐designed catchers allowed determination of particle shape, size distribution, ejection angle, and microstructures. Mapping of the ejecta imprints on the catcher surface enabled linking of the different patterns to ejection stages observed on high‐speed videos. The increase in projectile mass from 0.067 to 7.1 g correlates with an increase in the total ejected mass; ejecta angles, however, are similar in range for all experiments. The increase in projectile velocity from 2.5 to 5.1 km s^?1 correlates with a total ejecta mass increase as well as in an increase in comminution efficiency, and a widening of the ejecta cone. A higher degree of water saturation of the target yields an increase in total ejecta mass up to 400% with respect to dry targets, higher ejecta velocity, and a steeper cone. These data, in turn, suggest that the reduced impedance contrast between the quartz grains of the target and the pores plays a primary role in the ejecta mass increase, while vaporization of water determines the ejecta behavior concerning ejecta velocity and particle distribution.     

Approach service type D evaluation of the DLR GBAS testbed

Ground-based augmentation systems (GBAS) for satellite navigation are intended to replace the instrument landing system for precision approach of aircraft into an airport in the near future. Here, we show an evaluation of data collected during flight trials with the GBAS testbed of the German aerospace center with respect to requirements for the GBAS approach service type D. This service will permit approach and landing down to the zero visibility conditions of category IIIc approaches. We show output of all airborne monitors and the results of an integrity analysis. During all flight trials, the system performed within the required criteria for integrity, continuity, and availability.     

Local perspectives on a global phenomenon—Climate change in Eastern Tibetan villages

Tibetan villagers’ perceptions of climate change and its impacts are very detailed and can give important insights into local concerns and processes of climate change. Perceived climate changes and impacts differed significantly even within a small geographic area. Furthermore, climate change was seen as a moral and spiritual issue. These interpretations affect how people deal with climate change and its impacts and which solutions are regarded as relevant. In order to effectively address climate change impacts at the local scale and to enable the process of adaptation, it is necessary to address a combination of perceptions, local variations, moral and spiritual interpretations, and locally relevant solutions.     

Occurrence of copepod carcasses in the lower Chesapeake Bay and their decomposition by ambient microbes

We tested and refined the Neutral Red staining method for separating live and dead copepods in natural samples. Live copepods were stained red whereas dead copepods remained unstained. The staining results were not affected by method of killing, time of death or staining time. Tow duration had no significant effect on the percent dead copepods collected. The Neutral Red staining method was applied to study the occurrence of dead copepods along the York River and the Hampton River in the lower Chesapeake Bay during June–July, 2005. The zooplankton community was dominated by copepods; on average 29% of the copepod population appeared dead. Recovery of percent dead copepods did not differ between horizontal tows and vertical tows, suggesting that dead copepods were homogenously distributed in the water column. No significant relationship was found between the percent dead copepods and surface water temperature, salinity, Secchi depth or chlorophyll concentration. In laboratory experiments, dead copepods were decomposed by ambient bacteria and the rate of decomposition was temperature-dependent. Combining field and laboratory results we estimated that the non-consumptive mortality (mortality not due to predation) of copepods in the lower Chesapeake Bay was 0.12 d⁻¹ under steady-state condition, which is within the global average of copepod mortality rate.     

Electro-magnetic earthquake bursts and critical rupture of peroxy bond networks in rocks

We propose a mechanism for the low frequency electromagnetic emissions and other electromagnetic and electric phenomena which have been associated with earthquakes. The mechanism combines the critical earthquake concept and the concept of crust acting as a charging electric battery under increasing stress. The electric charges are released by activation of dormant charge carriers in the oxygen anion sublattice, called peroxy bonds or positive hole pairs (PHP), where a PHP represents an O₃X/^OO YO₃ with X,Y = Si⁴⁺,Al³⁺,…, i.e. O⁻ in a matrix of O²⁻ of silicates. We propose that PHP are activated by plastic deformations during the slow cooperative build-up of stress and the increasingly correlated damage culminating in a large “critical” earthquake. Recent laboratory experiments indeed show that stressed rocks form electric batteries which can release their charge when a conducting path closes the equivalent electric circuit. We conjecture that the intermittent and erratic occurrences of EM signals are a consequence of the progressive build-up of the battery charges in the Earth crust and of their release when crack networks percolate through the stressed rock volumes, providing a conductive pathway for the battery currents to discharge. EM signals are thus expected close to the rupture, either slightly before or after, that is, when percolation is most favored. The proposed mechanism should be relevant for the broader understanding of fractoemissions.     

Routine analysis of sediment pore water of high ionic strength

Pore water of sediments plays an important role in aquatic systems as mediator and as the reactive zone between the sediment and surface water. Sediment pore waters with high ionic strength from acidified pit lakes were investigated to obtain information about the influence on the lake water quality. The analysis of soluble reactive phosphorus, nitrate, ammonium, silica, dissolved organic carbon, ferrous iron, sulfate, chloride, sodium, potassium, calcium, magnesium, manganese, and total dissolved iron was predetermined as the dataset required for evaluation of water quality. The data collection procedure was optimised by designing a methodology for stabilisation, dilution of pore water samples and adaptation of analytical methods. The developed methodology was evaluated with respect to the effort required in the laboratory under routine conditions. In the first round of analyses, 72% of 638 individual analyses from a random selection of pore water profiles were found to be within the calibration ranges. Remedial actions to handle the remaining 28% of invalid analytical results are exemplified. Differences between comparative analyses of some ions by continuous flow analysis, ion chromatography, and atomic emission spectroscopy were evaluated. The majority of results measured by ion chromatography differed on a highly significant level from results measured by atomic emission spectroscopy. Possible reasons, originating from the extreme sample matrix, are discussed. Finally, the designed methodology and the results of the method comparison are used to recommend the selection of analytical methods under specific conditions.     

Submillimetre continuum images of the NGC 2024 star-forming ridge

We present 450- and 800-μm images, made with the James Clerk Maxwell Telescope, of the NGC 2024 molecular ridge. The seven previously known compact cores, FIR1–7, have been detected, and FIR5 has been resolved into a compact object and an associated extended source to the east. The estimated masses of the dense cores vary between 1.6 and 5.1 M⊙ per 14-arcsec beam, assuming a dust temperature of 30 K and a dust opacity of κ_800 μm = 0.002 m² kg⁻¹. A spectral index map made from the 450- and 800-μm images shows spatial variations, with the spectral index, α ( F _ν ∝ ν^α), being systematically lower towards the dense cores. We interpret this as evidence for a lower value of the frequency dependence of the dust opacity, β, towards the denser cores relative to the surrounding molecular material. This may indicate that grain growth is occurring in the cores, prior to planetesimal formation. By comparing the high-resolution 450-μm image with interferometer maps of the integrated CS(2–1) emission, the previously reported discrepancy between dust continuum emission and molecular line emission is found to be very localized. Depletion and temperature variations are discussed as possible explanations.