A laboratory study of seismic velocity and attenuation anisotropy in near-surface sedimentary rocks

The laboratory ultrasonic pulse‐echo method was used to collect accurate P‐ and S‐wave velocity (±0.3%) and attenuation (±10%) data at differential pressures of 5–50 MPa on water‐saturated core samples of sandstone, limestone and siltstone that were cut parallel and perpendicular to the vertical borehole axis. The results, when expressed in terms of the P‐ and S‐wave velocity and attenuation anisotropy parameters for weakly transversely isotropic media (ɛ, γ, ɛ_Q, γ_Q) show complex variations with pressure and lithology. In general, attenuation anisotropy is stronger and more sensitive to pressure changes than velocity anisotropy, regardless of lithology. Anisotropy is greatest (over 20% for velocity, over 70% for attenuation) in rocks with visible clay/organic matter laminations in hand specimens. Pressure sensitivities are attributed to the opening of microcracks with decreasing pressure. Changes in magnitude of velocity and attenuation anisotropy with effective pressure show similar trends, although they can show different signs (positive or negative values of ɛ, ɛ_Q, γ, γ_Q). We conclude that attenuation anisotropy in particular could prove useful to seismic monitoring of reservoir pressure changes if frequency‐dependent effects can be quantified and modelled.     

Reliability of experimental partition coefficients in carbonate systems: Evidence for inhomogeneous distribution of impurity cations

Electron spin resonance (ESR) spectroscopy, thermal analysis and X-ray diffraction (XRD) analysis are used to study the mode of incorporation of a wide range of impurity ions (up to 1% Ni²⁺, Sr²⁺, Cd²⁺, Mg²⁺, Cu²⁺, Fe²⁺, Zn²⁺, Pb²⁺, Mn²⁺ and Ba²⁺) in calcites synthesised in aqueous solutions. It is shown that when certain impurity ions are incorporated in these calcites they become concentrated, together with other trace elements such as Mn²⁺, into hitherto unsuspected trace phases. The important conclusion is drawn that unless the scavenging of trace elements by these phases can be avoided or corrected for, any calcite—liquid partition coefficients measured may have limited significance. ESR spectroscopy has revealed the intense strain common in calcites grown by different methods, whilst thermal analysis suggested that such strain may significantly alter the thermodynamic properties of these calcites. ESR spectroscopic analysis of aragonites synthesised by methods previously reported in the literature has revealed the common occurrence of trace calcite at concentrations below the XRD detection limit and proves the tendency of this calcite to scavenge trace Mn. Using ESR spectroscopy to monitor trace calcite levels and structural imperfections in synthetic aragonites, the urea hydrolysis technique is modified to provide a method for the synthesis of high-purity strain-free aragonite available for experimental studies.     

Petrologic constraints on rift-zone processes

The Puu Oo eruption in the middle of Kilauea volcano's east rift zone provides an excellent opportunity to utilize petrologic constraints to interpret rift-zone processes. Emplacement of a dike began 24 hours before the start of the eruption on 3 January 1983. Seismic and geodetic evidence indicates that the dike collided with a magma body in the rift zone. Most of the lava produced during the initial episode of the Puu Oo eruption is of hybrid composition, with petrographic and geochemical evidence of mixing magmas of highly evllved and more mafic compositions. Some olivine and plagioclase grains in the hybrid lavas show reverse zoning. Whole-rock compositional variations are linear even for normally compatible elements like Ni and Cr. Leastsquares mixing calculations yield good residuals for major and trace element analyses for magma mixing. Crystal fractionation calculations yield unsatisfactory residuals. The highly evolved magma is similar in composition to the lava from the 1977 eruption and, at one point, vents for these two eruptions are only 200 m apart. Possibly both the 1977 lava and the highly evolved component of the episode 1 Puu Oo lava were derived from a common body of rift-zone-stored magma. The more mafic mixing component may be represented by the most mafic lava from the January 1983 eruption; it shows no evidence of magma mixing. The dike that was intruded just prior to the start of the Puu Oo eruption may have acted as a hydraulic plunger causing mixing of the two rift-zone-stored magmas.     

Anomalous electrical resistivity anisotropy in clean reservoir sandstones

We report novel laboratory measurements of the full electrical resistivity tensor in reservoir analogue quartzose sandstones with clay contents less than 1.5%. We show that clean, homogeneous, visually uniform sandstone samples typically display between 15% and 25% resistivity anisotropy with minimum resistivity normal to the bedding plane. Thin‐section petrography, analysis of fabric anisotropy, and comparison to finite‐element simulations of grain pack compaction show that the observed anisotropy symmetries and magnitudes can be explained by syn‐depositional and post‐depositional compaction processes. Our findings suggest that: electrical resistivity anisotropy is likely to be present in most clastic rocks as a consequence of ballistic deposition and compaction; compaction may be deduced from measurements of electrical anisotropy; and the anisotropy observed at larger scales in well logging and controlled‐source electromagnetic data, with maximum resistivity normal to bedding, is most likely the result of meso‐scale (10^?1 m–10¹ m) periodic layering of electrically dissimilar lithologies.     

Changes in water quality following tidal inundation of coastal lowland acid sulfate soil landscapes

This study examines the remediation of surface water quality in a severely degraded coastal acid sulfate soil landscape. The remediation strategy consisted of partial restoration of marine tidal exchange within estuarine creeks and incremental tidal inundation of acidified soils, plus strategic liming of drainage waters. Time-series water quality and climatic data collected over 5 years were analysed to assess changes in water quality due to this remediation strategy. A time-weighted rainfall function (TWR) was generated from daily rainfall data to integrate the effects of antecedent rainfall on shallow groundwater levels in a way that was relevant to acid export dynamics. Significant increases in mean pH were evident over time at multiple monitoring sites. Regression analysis at multiple sites revealed a temporal progression of change in significant relationships between mean daily electrical conductivity (EC) vs. mean daily pH, and TWR vs. mean daily pH. These data demonstrate a substantial decrease over time in the magnitude of creek acidification per given quantity of antecedent rainfall. Data also show considerable increase in soil pH (2–3 units) in formerly acidified areas subject to tidal inundation. This coincides with a decrease in soil pe, indicating stronger reducing conditions. These observations suggest a fundamental shift has occurred in sediment geochemistry in favour of proton-consuming reductive processes. Combined, these data highlight the potential effectiveness of marine tidal inundation as a landscape-scale acid sulfate soil remediation strategy.     

Measurement of environmental trace-metal levels with transplanted mussels and diffusive gradients in thin films (DGT): a comparison of techniques

Transplanted mussels and diffusive gradients in thin films (DGT) were used to assess levels of cadmium, copper, lead and zinc at four sites situated inside and outside of two enclosed marinas, near Melbourne, Australia. Mussels accumulated all metals except cadmium. Over one year, there were large temporal differences in tissue metal levels in mussels, but differences between sites were only apparent for copper and lead. DGT showed temporal differences of the same kind as those seen in the mussels, but appeared to have more power to discriminate between sites. DGT found higher copper levels inside marinas than outside, and high levels of zinc were found inside one marina. Levels of copper and zinc were high enough to be of environmental concern for one site. The effect of fouling on DGT measurements will have to be quantified, or avoided by the use of multiple short-term exposures, if the technique is to become a widespread in situ monitoring tool.     

Lateral and vertical juxtaposition of matrix‐rich and matrix‐poor lithologies caused by particle settling in mixed mud–sand deep‐marine sediment suspensions

Sandy sedimentary rocks rich in detrital matrix (>10% silt/clay) have long been recognized in the ancient sedimentary record, and nowhere more commonly than in deep‐marine turbidite systems. Despite this, their depositional mechanisms remain poorly understood, in part because these rocks, which are enriched in fine‐grained sediment, are often poorly exposed in outcrop or are confined to observation in core. Matrix‐rich strata in the Neoproterozoic Windermere Supergroup, in contrast, are very well‐exposed and show systematic changes in lithofacies over distances of several tens to a few hundreds of metres along‐strike. Notably, these strata are observed in both basin floor and continental slope deposits, suggesting that their occurrence and systematic lithological arrangement is related to mechanistic, rather than palaeogeographic, controls. Specifically, the facies transect consists of structureless, clayey sandstone that transforms along‐strike to a two‐layer deposit with the development of an upper, planar‐based, markedly more matrix‐rich layer. Further along‐strike, the basal clayey sandstone thins and eventually pinches out, leaving only the (upper) sandy claystone layer, which in turn thins along‐strike and then pinches out. These systematic changes in lithology, but more specifically the distribution of clay, is interpreted to form a depositional continuum related to particle settling in a horizontally advecting, high concentration particle suspension formed along the margins of an avulsion‐related high‐energy turbulent suspension.     

Modelling microseismicity of a producing reservoir from coupled fluid‐flow and geomechanical simulation

In this paper, we investigate production induced microseismicity based on modelling material failure from coupled fluid‐flow and geomechanical simulation. The model is a graben style reservoir characterized by two normal faults subdividing a sandstone reservoir into three compartments. The results are analysed in terms of spatial and temporal variations in distribution of material failure. We observe that material failure and hence potentially microseismicity is sensitive to not only fault movement but also fluid movement across faults. For sealing faults, failure is confined to the volume in and around the well compartment, with shear failure localized along the boundaries of the compartment and shear‐enhanced compaction failure widespread throughout the reservoir compartment. For non‐sealing faults, failure is observed within and surrounding all three reservoir compartments as well as a significant distribution located near the surface of the overburden. All shear‐enhanced compaction failures are localized within the reservoir compartments. Fault movement leads to an increase in shear‐enhanced compaction events within the reservoir as well as shear events located within the side‐burden adjacent to the fault. We also evaluate the associated moment tensor mechanisms to estimate the pseudo scalar seismic moment of failure based on the assumption that failure is not aseismic. The shear‐enhanced compaction events display a relatively normal and tight pseudo scalar seismic moment distribution centred about 10⁶ Pa, whereas the shear events have pseudo scalar seismic moments that vary over three orders of magnitude. Overall, the results from the study indicate that it may be possible to identify compartment boundaries based on the results of microseismic monitoring.