Transformation relationship among different magnetic minerals within loess-paleosol sediments of the Chinese Loess Plateau

The dominant magnetic minerals and carriers of magnetic signals within the Chinese Loess Plateau are magnetite, maghemite, hematite, and goethite. In this study, we investigated the provenance and evolution of magnetic minerals during loess pedogenesis, using X-ray diffraction (XRD) and optical and electron microscopy, including field emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HRTEM). Our results reveal that single- and multiphase mineral assemblages among magnetic minerals in the loess-paleosol sequence have been formed. Partial oxidation of coarse eolian magnetite has occurred in the desert source area and the oxidation degree is enhanced after deposition of the dust upon the Chinese Loess Plateau. This mode of origin resulted in a microtexture consisting of an inner magnetite core surrounded by a hematite rim, and strongly affected the magnetic characteristics of the loess. Goethite coexists with hematite in the loess and paleosol, and nanometer-scale hematite is formed upon goethite rims via dehydration. Our study provides direct mineralogical evidence of the magnetic record and paleoclimatic implications of the loess-paleosol sequence of the Chinese Loess Plateau. Supported by National Natural Science Foundation of China (Grant Nos. 40772032 and 40573054) and National Basic Research Program (Grant No. 2007CB815603)     

Porosity and wave velocity evolution of granite after high-temperature treatment: a review

The evolution of porosity and changes in wave velocity in granite after high-temperature treatment has been experimentally investigated in different studies. Statistical analysis of the test results shows that there is a temperature threshold value that leads to variations in porosity and wave velocity. At a temperature that is less than 200 °C, the porosity of granite slowly increases with increases in temperature, while the wave velocity decreases. When the temperature is greater than 200 °C (especially between 400 and 600 °C), the porosity quickly increases, while the wave velocity substantially decreases. The temperature ranges of room temperature to 200 and 200–400 °C correspond to the undamaged state and the micro-damage state, respectively. The results confirm that there is an important link between the variations of physical and mechanical properties in response to thermal treatment. By studying the relationships among rock porosity, wave velocity and temperature, this provides the basis for solving multi-variable coupling problems under high temperatures for the thermal exploitation of petroleum and safe disposal of nuclear waste.     

Assessment of rock slope stability by probabilistic-based Slope Stability Probability Classification method along highway cut slopes in Adilcevaz-Bitlis (Turkey)

Rock slope stability is of great concern along highway routes as stability problems on cut slopes may cause fatal events as well as loss of property. In rock slope engineering, stability evaluations are commonly performed by means of analytical or numerical analyses, principally considering the factor of safety concept. As a matter of fact, the probabilistic assessment of slope stability is progressively getting popularity due to difficulties in assigning the most appropriate values to design parameters in analytical or numerical methods. Additionally, the effect of heterogeneities in rock masses and discontinuities on the analysis results is minimized through the probabilistic concept. In this study, slope stability of high and steep sedimentary rock cut slopes along a state highway in Adilcevaz-Bitlis (Turkey) was evaluated on the basis of probabilistic approach using the Slope Stability Probability Classification (SSPC) system. The probabilistic assessment indicates major slope stability problems because of discontinuity controlled and discontinuity orientation independent mass movements. Almost all studied cut slopes suffer from orientation-independent stability problems with very low stability probabilities. Additionally, the probability of planar and toppling failures is significantly high with respect to the SSPC system. The stability problems along the investigated rock slopes were also verified by field reconnaissance. Remedial measures such as slope re-design and reinforcement at the studied locations should be taken to prevent hazardous events along the highway. On the other hand, the probabilistic approach may be a useful tool during rock slope engineering to overcome numerous uncertainties when probabilistic and analytic results are compared.     

Impact of Pastoral Practices on Forest Cover and Regeneration in the Outer Fringes of Kedarnath Wildlife Sanctuary,Western Himalaya

The study reports the impact of migratory livestock in the buffer area of Kedarnath Wildlife Sanctuary. The cumulative impacts of livestock grazing, fuel wood extraction and other anthropogenic pressures on forest cover in and around camping sites have been analyzed using satellite data and field observations. Multi-date satellite data were used to map the forest cover around 16 seasonal livestock camps. An annual loss of about 7.25 ha of forest covers during 1976–1990, 13.57 ha during 1990–1999 and 11.46 ha during 1999–2005 are recorded. A loss of 108.53 ha of forestland has been estimated during 1976–1990, about 122.16 ha during 1990–1999 and 68.78 ha during 1999–2005. It is also observed that many of the isolated camping sites are now connected due to loss of vegetation. Phytosociological analysis indicates that the number of seedlings and saplings in three species of Quercus (Q. leucotrichophora, Q. floribunda and Q. semecarpifolia) as compared to mature tress is very less around cattle camping sites. The ratio of number of sapling with seedling and trees indicates that the status of sapling is nil to very poor, an indication of loss of saplings due to either trampling or grazing.     

A case study of the internal structures of gossans and weathering processes in the Iberian Pyrite Belt using magnetic fabrics and paleomagnetic dating

In the Rio Tinto district of the Iberian Pryrite Belt of South Spain, the weathering of massive sulfide bodies form iron caps, i.e., true gossans and their subsequent alteration and re-sedimentation has resulted in iron terraces, i.e., displaced gossans. To study the stucture and evolution of both types of gossans, magnetic investigations have been carried out with two foci: (1) the characterisation and spatial distribution of magnetic fabrics in different mineralised settings, including massive sulfides, gossans, and terraces, and (2) paleomagnetic dating. Hematite has been identified as the suceptibility carrier in all sites and magnetic fabric investigation of four gossans reveals a vertical variation from top to bottom, with: (1) a horizontal foliation refered to as “mature” fabric in the uppermost part of the primary gossans, (2) highly inclined or vertical foliation interpreted as “immature” fabric between the uppermost and lowermost parts, and (3) a vertical foliation interpreted to be inherited from Hercynian deformation in the lowermost part of the profiles. In terraces, a horizontal foliation dominates and is interpreted to be a “sedimentary” fabric. Rock magnetic studies of gossan samples have identified goethite as the magnetic remanence carrier for the low-temperature component, showing either a single direction close to the present Earth field (PEF) direction or random directions. Maghemite, hematite, and occasionally magnetite are the remanence carriers for the stable high-temperature component that is characterized by non PEF directions with both normal and reversed magnetic polarities. No reliable conclusion can be yet be drawn on the timing of terrace magnetization due to the small number of samples. In gossans, the polarity is reversed in the upper part and normal in the lower part. This vertical distribution with a negative reversal test suggests remanence formation during two distinct periods. Remanence in the upper parts of the gossans is older than in the lower parts, indicating that the alteration proceeded from top to bottom of the profiles. In the upper part, the older age and the horizontal “mature” fabric is interpreted to be a high maturation stage of massive sulfides’ alteration. In the lower part, the age is younger and the inherited “imature” vertical Hercynian fabric indicates a weak maturation stage. These two distinct periods may reflect changes of paleoclimate, erosion, and/or tectonic motion.     

Observation of hydrogen peroxide concentrations in a Japanese red pine forest

In order to study the concentrations of hydrogen peroxide (H₂O₂) and the factors controlling its concentrations, we monitored concentrations of H₂O₂ and other gases such as sulfur dioxide, ozone, and NO _x as well as meteorological factors such as air temperature, relative humidity, and wind direction/speed during eight measurement periods from 2000 to 2002 in a Japanese red pine forest in Japan. The H₂O₂ concentrations ranged from below 0.01 to 1.64 ppb, and analysis of the diurnal variation in H₂O₂ concentration showed high concentrations around noon, and low concentrations in the morning and late afternoon. The H₂O₂ concentrations were high in early summer, when O₃ concentration, temperature, and solar radiation were high, and were low in fall, when O₃ concentration, temperature, and solar radiation were low. We propose that O₃ concentration affects the production of H₂O₂ in the monitored region during the period under study, but that high H₂O₂ concentrations were sometimes caused by the transport of polluted air from urban regions. H₂O₂ concentrations decreased remarkably when SO₂ concentrations increased by transported volcanic emission on Miyake Island. In the absence of the effects of SO₂, H₂O₂ concentrations increased with increasing O₃ concentration and temperature.     

Misconceptions about the Hubble recession law

Almost all astronomers now believe that the Hubble recession law was directly inferred from astronomical observations. It turns out that this common belief is completely false. Those models advocating the idea of an expanding universe are ill-founded on observational grounds. This means that the Hubble recession law is really a working hypothesis. One alternative to the Hubble recession law is the tired-light hypothesis originally proposed by Zwicky (Proc. Nat. Acad. Sci. 15:773, 1929). This hypothesis leads to a universe that is an eternal cosmos continually evolving without beginning or end. Such a universe exists in a dynamical state of virial equilibrium. Observational studies of the redshift-magnitude relation for Type Ia supernovae in distant galaxies might provide the best observational test for a tired-light cosmology. The present study shows that the model Hubble diagram for a tired-light cosmology gives good agreement with the supernovae data for redshifts in the range 0<z<2. This observational test of a static cosmology shows that the real universe is not necessarily undergoing expansion nor acceleration. An erratum to this article can be found at     

Seismic clusters and their characteristics at the Arabian Sea Triple Junction: Supportive evidences for plate margin deformations

The plate margin features defining the Arabian Sea Triple Junction (ASTJ) are: the Aden Ridge (AR), Sheba Ridge (SR) with their intervening Alula-Fartak Transform (AFT), Carlsberg Ridge (CR) and Owen Fracture Zone (OFZ). Exact nature of ASTJ is presently debated: whether it is RRF (ridge-ridge-fault) or RRR (ridge-ridge-ridge) type. A revised seismicity map for ASTJ is given here using data for a period little more than a century. “Point density spatial statistical criterion” is applied to short-listed 742 earthquakes (mb ≥ 4.3), 10 numbers of spatio-temporal seismic clusters are identified for ASTJ and its arms. Relocated hypocentres help better constraining the cluster identification wherever such data exist. Seismic clusters actually diagnose the most intense zones of strain accumulation due to far field as well as the local stress operating at ASTJ. An earthquake swarm emanating from a prominent seismic cluster below SR provides an opportunity to investigate the pore pressure diffusion process (due to the active source) by means of “r-t plot”. Stress and faulting pattern in the active zones are deduced from 43 CMT solutions. While normal or lateral faulting is characteristic for these arms, an anomalous thrust earthquake occurs in the triangular ‘Wheatley Deep’ deformation zone proximal to ASTJ. The latter appears to have formed due to a shift of the deformational front from OFZ towards a transform that offsets SR. Though ASTJ is still in the process of evolution, available data favour that this RRF triple junction may eventually be converted to a more stable RRR type.     

A comparative study of sequential minimal optimization-based support vector machines,vote feature intervals,and logistic regression in landslide susceptibility assessment using GIS

Landslide susceptibility assessment using GIS has been done for part of Uttarakhand region of Himalaya (India) with the objective of comparing the predictive capability of three different machine learning methods, namely sequential minimal optimization-based support vector machines (SMOSVM), vote feature intervals (VFI), and logistic regression (LR) for spatial prediction of landslide occurrence. Out of these three methods, the SMOSVM and VFI are state-of-the-art methods for binary classification problems but have not been applied for landslide prediction, whereas the LR is known as a popular method for landslide susceptibility assessment. In the study, a total of 430 historical landslide polygons and 11 landslide affecting factors such as slope angle, slope aspect, elevation, curvature, lithology, soil, land cover, distance to roads, distance to rivers, distance to lineaments, and rainfall were selected for landslide analysis. For validation and comparison, statistical index-based methods and the receiver operating characteristic curve have been used. Analysis results show that all these models have good performance for landslide spatial prediction but the SMOSVM model has the highest predictive capability, followed by the VFI model, and the LR model, respectively. Thus, SMOSVM is a better model for landslide prediction and can be used for landslide susceptibility mapping of landslide-prone areas.     

Uncertainty representation of ocean fronts based on fuzzy-rough set theory

Analysis of ocean fronts' uncertainties indicates that they result from indiseemibility of their spatial position and fuzzi-ness of their intensity. In view of this, a flow hierarchy for uncertainty representation of ocean fronts is proposed on the basis of fuzzy-rough set theory. Firstly, raster scanning and blurring are carried out on an ocean front, and the upper and lower approximate sets, the indiscernible relation in fuzzy-rough theories and related operators in fuzzy set theories are adopted to represent its uncer-tainties, then they are classified into three sets: with members one hundred pereent belonging to the ocean front, belonging to the ocean front's edge and definitely not belonging to the ocean front. Finally, the approximate precision and roughness degree are util-ized to evaluate the ocean front's degree of uncertainties and the precision of the representation. It has been proven that the method is not only capable of representing ocean fronts' uncertainties, but also provides a new theory and method for uncertainty representation of other oceanic phenomena.