Analytical prediction of the collapse earthquake for R/C buildings: Case studies

An analytical methodology for estimating the values of behaviour factors (q-factors), suggested in a companion paper, is applied to two typical reinforced concrete structures, a frame and a dual system, designed according to current European trends in seismic design. The two case studies clearly indicated the need to consider both local and overall collapse criteria, since either one can be critical for the determination of the behaviour factor, depending on the type of the structure. The calculated values of q-factors were close to, but higher than those specified by modern seismic codes, the larger discrepancy occurring in the case of the dual system.     

On the influence of the physico-chemical properties of aerosols on the life cycle of radiation fogs

A one-dimensional model of radiation fog with detailed microphysics is presented. Aerosols and cloud droplets are treated in a joint two-dimensional size distribution. Radiative fluxes are calculated as functions of the radiative properties of the time-dependent particle spectra. The droplet growth equation is solved by considering radiative effects. Turbulence is treated by means of a higher order closure model. The interaction between the atmosphere and the earth's surface is explicitly simulated.Three numerical sensitivity studies are performed to investigate the impact of the different physico-chemical properties of urban, rural and maritime aerosols on fog formation. Numerical results elucidate that depending on the aerosol type used, the resulting fog events are completely different. This is particularly true for the times of fog formation and dissipation as well as for the liquid water content and supersaturations within the fogs. In the activated part of the particle spectra, the aerosol mass is very inhomogeneously distributed. The maxima of the curves do not coincide with the maxima of the corresponding liquid water distributions.     

Small-scale heterogeneity and soil-moisture variability in the unsaturated zone

The distribution of water within a soil profile can only be partly explained by the time distribution and rate of surface-water input. Observed differences in soil moisture within the unsaturated zone result from the interaction of surface-water inputs with spatially inhomogeneous soil characteristics. Water which initially percolates vertically is differentially impeded as a result of subtle textural changes in the soil, and is then preferentially retained in such zones of transition, causing large differences in soil-water content to occur. The scale of this vertical variability is of tenths of metres, whilst lateral variability of soil moisture reflects textural changes over a few metres. The observed influence of small-scale heterogeneity on soil-water content suggests that the conventional assumptions of isotropicity and homogeneity of the textural and hydraulic properties of porous media used in drainage basin and hillslope hydrological models need scrutiny, even for single stratigraphic units.     

Thermal regime at the Upper Stillwater dam site, Uinta mountains, Utah: Implications for terrain, microclimate and structural corrections in heat flow studies

A detailed study of the subsurface thermal regime at the Upper Stillwater dam site, Uinta Mountains, northeast Utah, has been made. Temperature measurements were made in 36 drillholes located within a 1 km² area and ranging in depth from 20 to 97 m. Holes less than about 40 m deep were used only to obtain information about spatial variations in mean annual surface temperature. Several holes in or near talus slopes at the sides of the canyons have temperature minima approaching 0°C between 10 and 20 m indicating the presence of year-round ice at the base of the talus. Another set of holes show transient thermal effects of surface warming resulting from clearing of a construction site 3.5 years prior to our measurements. Most of the remaining holes show conductive behavior and have gradients ranging from 13° to 17°C km⁻¹. Measurements made on 44 core samples yield a thermal conductivity of 5.6 (std. dev. 0.35) W m⁻¹ K⁻¹ for the Precambrian quartzite present. Surface heat flow estimates for these holes range from 70 to 100 mW m⁻². However, the local disturbance of the thermal field by topography and microclimate is considerable. A finite difference method used to model these effects yielded a locally corrected Upper Stillwater heat flow of about 75 mW m⁻². A final correction to account for the effects of refraction of heat from the low conductivity sedimentary rocks in the Uinta Basin into the high conductivity quartzite at the dam site, produced a regionally corrected Upper Stillwater heat flow between 60 and 65 mW m⁻². This value is consistent with the observed heat flow of 60 mW m⁻² in the Green River Basin to the north and the Uinta Basin to the south.     

High resolution time series of lead and zinc in sediments of Lake Constance

Sediments in Lake Constance have been dated by radiometric methods and lamination counting. Investigations into the concentrations of lead and zinc in the sediments were carried out to get detailed information about environmental history. Maximum concentrations were found at the beginning of the 1960's. The lead maximum contamination occurred 3 years before the zinc maximum and has an unidentified source. The use of coal, leaded gasoline or the remobilization within the sediment could be excluded to result in the lead maximum. The fluctuations in zinc contamination could be explained with increasing and decreasing pollution (industry, coal burning, building of sewage plants). The greatest fluctuations of both metals occur during periods of great change in the economic history of Germany.     

The stratospheric quasi-biennial oscillation observed in the semidiurnal ground pressure data

Ground pressure observations made at Macao (22^○N, 113^○E) from 1953 to 1991 are analyzed and compared with the stratospheric quasi-biennial oscillation (QBO) data obtained during the same interval. The periods of the two phenomena and their time evolution are found to be close to each other. Furthermore, the time series of the stratospheric winds and the S2(p) QBO signature are highly correlated, thus confirming earlier analysis. On this basis, pressure measurements obtained at Batavia (now Djakarta: 6^○S, 107^○E) from 1870 to 1944 are used to trace back the QBO phenomenon before the advent of systematic stratospheric balloon measurements. The inferred period, which varies between 25 and 32 months, suggests that the QBO has been present in the atmosphere at least since 1870.     

Deep structure of the bohemian massif from phase velocities of Rayleigh and Love waves

Summary Phase velocities of Rayleigh and Love waves have been measured between the broadband seismic stations KHC (Kaperské Hory, South Bohemia) and KSP (Ksi, Lower Silesia), a profile that nearly coincides with the Interactional DSS Profile VII. The data for both wave types were separately inverted into models of shear-wave velocity versus depth. Novotný's model KHKS 82[1] for the DSS Profile VII was used as a start model. While the crustal section of Novotný's model is compatible with both of our data sets, our Rayleigh-wave data require smaller shear-wave velocities, on the average by 0.24 km/s, in the top 180 km of the mantle. The average difference between Novotný's model and our Love-wave model in that depth range is only 0.06 km/s. If our identification of the observed Love waves as the fundamental mode is correct, this result indicates the presence of polarization anisotropy in the uppermost mantle.

---

u a mu u a ¶rt; unu uuu mauu (an , a u) u S (, ua uu). u - S nuuum mmmm ¶rt;a¶rt; nu VII . a ¶rt; u mun m¶rt; umua ¶rt;u auumu mu nn mu. am mam¶rt;u a unaa ¶rt; S 82 m[1] ¶rt; nu VII . a am ¶rt;u m aua uu aau au ¶rt;a, ¶rt;a au ¶rt;a ¶rt; mm uu m nn — ¶rt; a 0,24 / 180 uma amuu. ¶rt;a aua ¶rt; ¶rt; m u a ¶rt; ¶rt; a m ¶rt;uanau n¶rt;mam 0,06 /. u aa u¶rt;muuau a¶rt;a a a ¶rt;ama ¶rt;a m nau, m mm mam u¶rt;ummm numuu nuau aumnuu amuu.