ASPHAA: A GIS‐Based Algorithm to Calculate Cell Area on a Latitude‐Longitude (Geographic) Regular Grid

One characteristic of a Geographic Information System (GIS) is that it addresses the necessity to handle a large amount of data at multiple scales. Lands span over an area greater than 15 million km² all over the globe and information types are highly variable. In addition, multi‐scale analyses involve both spatial and temporal integration of datasets deriving from different sources. The currently worldwide used system of latitude and longitude coordinates could avoid limitations in data use due to biases and approximations. In this article a fast and reliable algorithm implemented in Arc Macro Language (AML) is presented to provide an automatic computation of the surface area of the cells in a regularly spaced longitude‐latitude (geographic) grid at different resolutions. The approach is based on the well‐known approximation of the spheroidal Earth's surface to the authalic (i.e. equal‐area) sphere. After verifying the algorithm's strength by comparison with a numerical solution for the reference spheroidal model, specific case studies are introduced to evaluate the differences when switching from geographic to projected coordinate systems. This is done at different resolutions and using different formulations to calculate cell areas. Even if the percentage differences are low, they become relevant when reported in absolute terms (hectares).     

Systematically variable geometry and architecture of incised-valley fills controlled by orbital forcing: A conceptual model from the Pennsylvanian Breathitt Group (Kentucky,USA)

Incised-valley fills preserved within ancient coastal to shallow-marine successions represent important archives of environmental and sea-level change. Most current knowledge about the origin of incised valleys stems from Quaternary case studies; however, research on pre-Quaternary examples can shed light on valley formation and evolution across longer timespans. This article describes different types of incised-valley fills from Lower to Middle Pennsylvanian fluvio-deltaic successions of the Breathitt Group (eastern Kentucky), accumulated in the Central Appalachian Foreland under prevalent glacioeustatic forcing driven by Gondwanan glaciations. Based on well-established criteria for their recognition, numerous incised-valley fills were identified from outcrop and subsurface data through more than 300 m of clastic successions consisting of fourth-order stratigraphic sequences stacked into third-order composite sequences. Incised-valley fills were categorized into three archetypes based on lateral extent and aspect ratio (relatively wide versus narrow valley fills), nature of infill (fully continental versus mixed marine and continental facies associations) and relationships to underlying coal zones (truncating versus non-truncating). The systematic occurrence of each incised-valley fill type at specific stratigraphic positions within every third-order sequence suggests control by a periodic allogenic factor. Valley-fill archetypes are interpreted in terms of variable accommodation-supply ratios driven by variable duration of formative base-level cycles. For example, relatively wide incised-valley fills with alluvial infill evolved during long-lived cycles whose prolonged base-level drawdown maintained low accommodation/supply ratios. Deeper valleys with low aspect ratios and mixed marine-continental infills were generated by short-lived base-level drawdown that forced higher accommodation/supply ratios. Available chronological data for the studied successions consent to estimate base-level cycles spanning 10^4–5 years that were likely modulated by interference patterns of orbital parameters (obliquity and eccentricity) via global climate and glacioeustatic fluctuations. This conceptual model, relating incised-valley fill morphometry and internal architecture to orbital forcing patterns, provides a possible approach to predicting and interpreting incised-valley fill variability through successions accumulated during icehouse conditions.     

B.S. Daya Sagar,Qiuming Cheng and Frits Agterberg: Handbook of Mathematical Geosciences: Fifty Years of IAMG

Mathematical Geosciences -     

The role of structural inheritance in continental break-up and exhumation of Alpine Tethyan mantle(Canavese Zone,Western Alps)

The Canavese Zone(CZ)in the Western Alps represents the remnant of the distal passive margin of the Adria microplate,which was stretched and thinned during the Jurassic opening of the Alpine Tethys.Through detailed geological mapping,stratigraphic and structural analyses,we document that the continental break-up of Pangea and tectonic dismemberment of the Adria distal margin,up to mantle rocks exhumation and oceanization,did not simply result from the syn-rift Jurassic extension but was strongly favored by older structu ral inheritances(the Proto-Canavese Shear Zone),which controlled earlier lithospheric weakness.Our findings allowed to redefine in detail(i)the tectono-stratigraphic setting of the Variscan metamorphic basement and the Late Carbonife rous to Early Cretaceous CZ succession,(ii)the role played by inherited Late Carboniferous to Early Triassic structures and(iii)the significance of the CZ in the geodynamic evolution of the Alpine Tethys.The large amount of extensional displacement and crustal thinning occurred during different pulses of Late Carbonife rous-Early Triassic strike-slip tectonics is wellconsistent with the role played by long-lived regional-scale wrench faults(e.g.,the East-Variscan Shear Zone),suggesting a re-discussion of models of mantle exhumation driven by low-angle detachment faults as unique efficient mechanism in stretching and thinning continental crust.     

火山碎屑岩储层特征及敏感性——以塔木察格盆地塔南凹陷为例

为了研究火山碎屑岩的储层特征及储层敏感性机理,以塔木察格盆地塔南凹陷铜钵庙组)南屯组火山碎屑岩为对象,运用普通薄片、铸体薄片和扫描电镜等技术,结合储层敏感性实验资料,根据《储层敏感性流动实验评价方法》(SY/T5358-2002),分析火山碎屑岩储层特征及其水敏、盐敏、速敏、碱敏、酸敏的特征和形成机理.结果表明:岩石类型包括凝灰岩、沉凝灰岩和凝灰质砂(砾)岩,主要敏感性黏土矿物有蒙脱石、伊利石、高岭石、绿泥石和伊/蒙混层,属于中低孔特低渗型储层;水敏性强弱与岩石类型关系密切,凝灰质砂(砾)岩水敏为中等偏强)强,凝灰岩和沉凝灰岩水敏为中等偏弱)中等偏强;盐敏程度绝大多数为中等偏强,临界盐度为5.126g/L;速敏为中等偏弱)弱速敏;碱敏为中等偏弱)中等偏强碱敏,临界碱度为7.43;酸敏程度范围较广;水敏程度与黏土矿物总量呈正相关;酸敏程度主要受绿泥石含量影响,酸敏指数与绿泥石含量呈正相关.该研究可为火山碎屑岩油气勘探提供借鉴.     

Perspectives of a visible instrument on the VLTI

In this paper we present the most promising science cases for a new generation visible instrument on the VLTI and the conceptual idea for the instrumental configuration. We also present a statistical study of the potential targets that may be accessible for the different classes of objects and for the required spectral resolutions.     

Distribution and functional response of sublittoral soft bottom assemblages to sedimentary constraints

Mollusc and annelid polychaete macrofaunal assemblages were studied in a sublittoral sandy bottom of 1.8 km² extension, along the western Calabrian coast (low Tyrrhenian Sea). The strict coupling of the local sedimentary dynamics with the benthic assemblages was investigated on a small spatial scale (patchiness), at the mesoscale depth-related gradients and at the level of functional/trophic habits. Non-metrical correlations (ρ), index of dispersion (Di) and dispersion weighted abundances, averaged per depth level highlighted the response of some characteristic species to the patchiness of sediments as well as to the predominant environmental gradients. Species habits and trophic guilds, that were assessed in terms of biomass (wet weight) and secondary “pseudo-production” (abundance × biomass), clarified the differential functional response of the assemblages at different depth levels. Polychaetes reached 84.86% abundance and showed a highly clumped distribution of sessile species (Ditrupa arietina, Aponuphis brementi, Chone acustica, Spiophanes kroyeri); to a lower extent the motile species (Hyalinoecia tubicola, Marphisa bellii, Phylo foetida) were present. Molluscs reached 15.14% abundance and only some bivalve taxa showed significant aggregated distributions (Corbula gibba, Tellina donacina, Tellina distorta), whereas gastropod species were more evenly distributed. Total biomasses were almost equal between the two taxonomic groups (46.41 g WW on average). Biotic–environmental rank matching highlighted depth, very fine sands (60–200 μm), sorting grade, skewness index and pH as being the most influential factors in the distributions of some species, followed secondarily by coarse silts (40–60 μm) and coarser sands (200–2000 μm). Within the local context of water/sediment oligotrophy, the adaptive strategies of macrofauna to a highly seasonal supply of autochthonous phytoplanktonic seston associated with imported macro debris and terrigenous components were emphasized. Evidence of such a differential nutrient supply was the clear functional differentiation of the shallower levels from the deeper ones, and the presence of an intermediate zone which was selectively dominated, in terms of abundance and biomass, by microphagous filter/suspension feeders. Moreover, the shortage of burrowing deposit feeders as well as the prevalence of motile macrophagous omnivores beyond 20 m depth may be considered as ecologically correlated aspects.     

Revised seismotectonic model of NE Italy and W Slovenia based on focal mechanism inversion

The study is focusing on the stress and strain inversions from focal mechanisms in a revised seismotectonic zonation of northeastern Italy and western Slovenia. The recent increase of monitoring capability of the local seismic network, the updated geological-structural model of the area, and the novelties emerged from studies on the spatial organization of the seismicity allowed a redefinition of the seismotectonic zones. The stress and strain tensors inversion is inferred from 203 focal mechanisms, corresponding to earthquakes occurred between 1984 and 2016 with coda-duration magnitude range from 2.0 to 5.6. The inverted stress domains reveal an articulated picture of the interaction of the Adria microplate with the Eurasian plate. A dominant strike-slip stress field characterizes the eastern part of the area, while the seismotectonic zones of the central part are undergoing to thrusting regime. The stress pattern inferred in the western part of the study area outlines a complex picture with prevailing strike-slip regime and dominant compression only in a seismotectonic zone. The comparison of stress and strain tensor orientations evidences a relative uniformity of the crustal strength in the eastern and northwestern zones of the study area. The central and western zones appear to be characterized by planes of mechanical weakness not favorably oriented for failure with respect to the stress tensor.