Tectonometamorphic evolution of the Atbashi high‐P units (Kyrgyz CAOB,Tien Shan): Implications for the closure of the Turkestan Ocean and continental subduction–exhumation of the South Kazakh continental margin

The South Tien Shan (STS) belt results from the last collision event in the western Central Asian Orogenic Belt (CAOB). Understanding its formation is of prime importance in the general framework of the CAOB. The Atbashi Range preserves high‐P (HP) rocks along the STS suture, but still, its global metamorphic evolution remains poorly constrained. Several HP units have been identified: (a) a HP tectonic mélange including boudins of mafic eclogites in a sedimentary matrix, (b) a large (>100 km long) high‐P metasedimentary unit (HPMU) and (c) a lower blueschist facies accretionary prism. Raman Spectroscopy on carbonaceous material combined with phengite and chlorite multiequilibria and isochemical phase diagram modelling indicates that the HPMU recorded homogeneous P–T conditions of 23–25 kbar and 560–570°C along the whole unit. ⁴⁰Ar/³⁹Ar dating on phengite from the HPMU ranges between 328 and 319 Ma at regional scale. These ages are interpreted as (re‐) crystallization ages of phengite during T_max conditions at a pressure range of 20–25 kbar. Thermobarometry on samples from the HP tectonic mélange provides similar metamorphic peak conditions. Thermobarometry on the blueschist to lower greenschist facies accretionary prism indicates that it underwent P–T conditions of 5–6 kbar and 290–340°C, highlighting a 17–20 kbar pressure gap between the HPMU‐tectonic mélange units and the accretionary prism. Comparison with available geochronological data suggests a very short time span between the prograde path (340 Ma), HP metamorphic peak (330 Ma), the T_max (328–319 Ma) and the final exhumation of the HPMU (303–295 Ma). Extrusion of the HPMU, accommodated by a basal thrust and an upper detachment, was driven by buoyant forces from 70–75 km up to 60 km depth, which directly followed continental subduction and detachment of the HPMU. At crustal depths, extrusion was controlled by collisional tectonics up to shallow levels. Lithological homogeneity of the HPMU and its continental‐derived character from the North Tien Shan suggest this unit corresponds to the hyper‐extended continental margin of the Kazakh continent, subducted southward below the north continental active margin of the Tarim craton. Integration of the available geological data allows us to propose a general geodynamic scenario for Tien Shan during the Carboniferous with a combination of (a) N‐dipping subduction below the Kazakh margin of Middle Tien Shan until 390–340 Ma and (b) S‐dipping subduction of remaining Turkestan marginal basins between 340 and 320 Ma.     

Climatic vs. tectonic signals in a continental extensional basin (Teruel,NE Spain) from stable isotope (δ18O) and sequence stratigraphical evolution

Alluvial fans and shallow carbonate lakes interfered in the Teruel half‐graben during the Late Miocene–Pliocene. Tectonic influence is recorded in alluvial and lacustrine–palustrine successions, with long‐term climate changes being recorded in detail in the isotopic signatures of carbonates. Episodes of tectonic activity induced alluvial fan progradation and lake retraction in the whole basin. Three lacustrine stages have been identified, which support the idea that climate also exerted an important control on sedimentation. The transition between stages 1 and 2 occurred during a tectonically calm episode due to an increase in aridity in the Early Turolian; small fans with source areas next to the lake margin prograded, inducing lake‐shore retraction. The transition from stage 2 to 3 was caused by the superimposition of increasing tectonic activity and aridity effects. Our study demonstrates that discrimination of allogenic factors controlling sedimentation in continental closed basins is possible using sequence stratigraphy in combination with other techniques such as geochemistry of carbonates.     

Correction to: Spatial distribution and estimation of rainfall trends and erosivity in the Epitácio Pessoa reservoir catchment,Paraíba,Brazil

Natural Hazards - The article “Spatial distribution and estimation of rainfall trends and erosivity in the Epitácio Pessoa reservoir catchment, Paraíba, Brazil”, written by da...     

Urban forest loss using a GIS-based approach and instruments for integrated urban planning:A case study of Jo(a)o Pessoa,Brazil

Urban forests play an important role in the thermal comfort and overall life of local populations in large-and medium-sized cities.This study analyzes urban forest loss and maps land use and land cover (LULC) changes between 1991 and 2018 by evaluating the use of urban planning instruments for the mitigation of urban forest loss in Jo～o Pessoa,Brazil.For this purpose,satellite-derived LULC images from 1991,2006,2010 and 2018 and data on urban forest loss areas obtained using the Google Earth Engine were used.In addi-tion,this paper also discusses the instruments used for integrated urban planning,which are(a) the legal sector,responsibility and nature;(b) the urban expansion process;and (c) the elements of urban infrastructure.The results show a clear shift in land use in the study area.The major changes in LULC classes occurred in urban areas and herbaceous vegetation,while the greatest loss was in arboreal/shrub vegetation.Thus,an increase in the pressure to occupy zones intended for environmental preservation could be estimated.Our results showed similar accuracies with other studies and more spatial details.The characteristics of the patterns,traces,and hotspots of urban expansion and forest cover loss were explored.We highlighted the potential use of this proposed framework to be applied and validated in other parts of the world to help better understand and quantify various aspects of ur-ban-related problems such as urban forest loss mapping using instruments for integrated urban planning and low-cost approaches.     

Estimated travel time for walking trails in natural areas

An increase in walking or hiking activities in natural areas requires improvements in information and advice about trails, including their difficulty, available services and estimated travel time. Comparative studies show remarkable differences between measured and calculated travel times obtained by available predictive procedures (Naismith’s rule, Tobler’s hiking function or MIDE). A new procedure has been designed by combining pre-existing methods (Tobler’s and MIDE), and travel times have been calculated for 21 trails located in different protected natural areas of Spain. Times obtained are compared with travel times measured by individual users and uploaded into specialized walking-hiking websites (Wikiloc). Results show that the new procedure (Modified Tobler) reduces differences between calculated and measured travel times, which makes it suitable not only for trail managers to estimate travel times but also as a key part of pedestrian transport analysis in trail networks.     

Cretaceous deformation of the southern Central Andes: synorogenic growth strata in the Neuquén Group (35° 30′–37° S)

The Neuquén Group is an Upper Cretaceous continental sedimentary unit exhumed during the latest Miocene contractional phase occurred in the southern Central Andes, allowing a direct field observation and study of the depositional geometries. The identification of growth strata on these units surrounding the structures of the frontal parts of the Andes, sedimentological analyses and U–Pb dating of detrital components, allowed the definition of a synorogenic unit that coexisted with the uplift of the early Andean orogen since ca. 100 Ma, maximum age obtained in this work, compatible with previous assignments and constrained in the top by the deposition of the Malargüe Group, in the Maastrichtian (ca. 72 Ma). The definition of a wedge top area in this foreland basin system, where growth strata were described, permitted to identify a Late Cretaceous orogenic front and foredeep area, whose location and amplitude contrast with previous hypotheses. This wedge top area was mostly fed from the paleo‐Andes with small populations coming from sources in the cratonic area that are interpreted as a recycling in Jurassic and Lower Cretaceous sections, which contrasts with other analyses performed at the foredeep zone that have mixed sources. In particular, Permian sources are interpreted as coming directly from the cores of the basement structures, where Neopaleozoic sections are exposed, next to the synorogenic sedimentation, implying a strong incision in Late Cretaceous times with an exhumation structural level similar to the present. The maximum recognised advance for this Late Cretaceous deformation in the study area is approximately 500 km east of the Pacific trench, which constitutes an anomaly compared with neighbour segments where Late Cretaceous deformations were found considerably retracted. The geodynamic context of the sedimentation of this unit is interpreted as produced under the westward fast moving of South America, colliding with two consecutive mid‐ocean ridges during a period of important plate reorganisation. The subduction of young, anhydrous, buoyant lithosphere would have produced changes in the subduction geometry, reflected first by an arc waning/gap and subsequently by an arc migration that coexisted with synorogenic sedimentation. These magmatic and deformational processes would be the product of a shallow subduction regime, following previous proposals, which occurred in Late Cretaceous times, synchronous to the sedimentation of the Neuquén Group.     

Subsidence and thermal history of an inverted Late Jurassic‐Early Cretaceous extensional basin (Cameros,North‐central Spain) affected by very low‐ to low‐grade metamorphism

The Cameros Basin (North Spain) is a Late Jurassic‐Early Cretaceous extensional basin, which was inverted during the Cenozoic. It underwent a remarkable thermal evolution, as indicated by the record of anomalous high temperatures in its deposits. In this study, the subsidence and thermal history of the basin is reconstructed, using subsidence analysis and 2D thermal modelling. Tectonic subsidence curves provide evidence of the occurrence of two rapid subsidence phases during the syn‐extensional stage. In the first phase (Tithonian‐Early Berriasian), the largest accommodation space was formed in the central sector of the basin, whereas in the second (Early Barremian‐Early Albian), it was formed in the northern sector. These rapid subsidence phases could correspond to relevant tectonic events affecting the Iberian Plate at that time. By distinguishing between the initial and thermal subsidence and defining their relative magnitudes, Royden's (1986) method was used to estimate the heat flow at the end of the extensional stage. A maximum heat flow of 60–65 mW/m² is estimated, implying only a minor thermal disturbance associated with extension. In contrast with these data, very high vitrinite reflectance, anomalously distributed in some case with respect to the typical depth‐vitrinite reflectance relation, was measured in the central‐northern sector of the basin. Burial and thermal data are used to construct a 2D thermal basin model, to elucidate the role of the processes involved in sediment heating. Calibration of the thermal model with the vitrinite reflectance (%Ro) and fluid inclusion (FI) data indicates that in the central and northern sectors of the basin, an extra heat source, other than a typical rift, is required to explain the observed thermal anomalies. The distribution of the %Ro and FI values in these sectors suggests that the high temperatures and their distribution are related to the circulation of hot fluids. Hot fluids were attributed to the hydrothermal metamorphic events affecting the area during the early post‐extensional and inversion stages of the basin.     

An expanded surface-water palaeotemperature inference model for use with fossil midges from eastern Canada

Using an expanded surface sample data set, representing lakes distributed across a transect from southernmost Canada to the Canadian High Arctic, a revised midge-palaeotemperature inference model was developed for eastern Canada. Modelling trials with weighted averaging (with classical and inverse deshrinking; with and without tolerance downweighting) and weighted averaging partial least squares (WA-PLS) regression, with and without square-root transformation of the species data, were used to identify the best model. Comparison of measured and predicted temperatures revealed that a 2 component WA-PLS model for square-root transformed percentage species data provided the model with the highest explained variance (r =0.88) and the lowest error estimate (RMSEP _jack =2.26 °C). Comparison of temperature inferences based on the new and old models indicates that the original model may have seriously under-estimated the magnitude of late-glacial temperature oscillations in Atlantic Canada. The new inferences suggest that summer surface water temperatures in Splan Pond, New Brunswick were approximately 10 to 12 °C immediately following deglaciation and during the Younger Dryas. During the Allerod and early Holocene, surface water temperatures of 20 to 24 °C were attained. The new model thus provides the basis for more accurate palaeotemperature reconstructions throughout easternmost Canada.