Isotope evidence for quantifying river evaporation and recharge processes in the lower reaches of the Yellow River

Evaporation and recharge are important hydrological processes in the water cycle. However, accurately quantifying these two processes of river remains to be difficult due to their spatial heterogeneity and the limitations of traditional methods. In this study, a more reliable method of stable isotopes of δ ¹⁸O and δ ²H based on the Rayleigh distillation equation and mass conservation was used to estimate the evaporation and recharge of the rivers in the lower reaches of the Yellow River, North China Plain. Comprehensive sampling campaigns including 30 surface water samples from 10 rivers, 33 groundwater samples from domestic and observation wells, and two Yellow River water samples were conducted. The results showed that the evaporation proportion of the rivers based on δ ¹⁸O and δ ²H both averaged 14.4%. The evaporation proportions in each river did not completely follow a linear increasing trend along the flow path. This phenomenon could be mainly explained by the different proportions of recharge from groundwater and Yellow River water. With closer to the Yellow river, evaporation of the rivers decreased while the recharge by the Yellow River increased. Regression equations based on δ ¹⁸O, δ ²H, and their average revealed that the evaporation proportion respectively increased by 1.02, 0.79, and 0.90% with the increase in the distance to the Yellow River per 10 km. On the contrary, the recharge proportion decreased by 7.68, 5.51, and 6.59%, respectively. In addition, using δ ¹⁸O rather than δ ²H was more reliable in studying the spatial influence of the Yellow River on evaporation and recharge. Sensitivity analysis showed that the evaporation model was most sensitive to isotopic composition, rather than to air temperature or relative humidity. The results of this study provide insights into the determination of river hydrological processes and the management of water resources.     

Heavy metals distribution in agricultural topsoils in urban area

Intensive urbanisation of the Croatian capital of Zagreb has led to a situation where very good agricultural soils, developed mostly on Pleistocene eolian sediments and alluvial and proluvian Holocene sediments are entrapped within urban and suburban areas. Therefore the influence of urban and industrialised environments on the accumulation of metals in agricultural topsoils has been investigated. On an area of 860 km² of the wider Zagreb region, 331 samples were taken according to a regular 1ǵ km square mesh. Samples were dissolved in aqua regia and analysed for Cd, Cu, Fe, Mn, Ni, Pb and Zn with flame atomic aqua regia absorption spectroscopy. The following concentration ranges have been determined: Cd 0.25-3.85 mg kg^-1 (average 0.66 mg kg^-1), Cu 4.30-183 mg kg^-1 (average 20.8 mg kg^-1), Fe 5.8-51.8 g kg^-1 (average 27 g kg^-1), Mn 79.2-1282 mg kg^-1 (average 613 mg kg^-1), Ni 0.70-282 mg kg^-1 (average 49.5 mg kg^-1), Pb 1.50-139 mg kg^-1 (average 25.9 mg kg^-1), and Zn 15.2-277 mg kg^-1 (average 77.9 mg kg^-1). Visualisation of the spatial data is made by the aid of GIS, and selected maps of the heavy metal concentrations in topsoils are displayed. Statistical multivariate analysis was carried out for quantitative study and data were processed by means of R-mode factor analysis, applying the varimax-raw rotational technique. F1, which grouped Cd, Pb, Cu, Zn and partially Ni, is characterized as a factor with strongly scattered anthropogenic influence. The elements in F2, Fe, Mn and partially Ni are mainly of geogenic, i.e. pedogenic, origin. The variations in concentrations of the investigated elements are thus of both natural and anthropogenic origins. The variations in the main soil constituents, particularly Fe and Mn, are determined primarily by the composition of different regolithic substrates of the fluvial origin in recent pedogenesis. High concentrations of nickel are also related to morphogenetic characteristics of the wider region, primarily basic and ultrabasic magmatic rocks of the surrounding mountain range. It is, however, assumed that the anomalous nickel concentrations in the vicinity of the highway and the airport are of anthropogenic origin, i.e. caused by fuel combustion. Copper is characterized by strongly scattered anthropogenic influence, which is related particularly to uncontrolled solid waste disposals or discharges of liquid waste from households or agricultural enterprises. With Zn, Pb and Cd, there are two possible ways of diffuse pollution. The Sava River, which drains the area and feeds the abundant Quaternary aquifer spreading below the major part of the investigated agricultural areas, has been exposed to intensive pollution by mining, industry and cities in the recent history. The part of the area with the highest determined concentrations of Zn, Pb and Cd was repeatedly flooded as recently as the previous decade; therefore, the recent sedimentation of the river deposits exposed to pollution is a very probable cause of the accumulation of metals in this until recently inundation area. The other way is atmospheric deposition of particles from urban sources (industrial emission, traffic, waste disposals, heating plants, etc.). In addition to agricultural enterprises, several economically important, but ecologically risky, facilities are situated in the vicinity of the water-protection area. The area is intersected by a very busy ring road, while a marshalling yard, the city dump, pharmaceutical and chemical industry, the district-heating plant and the airport are all located in close proximity. The geochemical maps show a clear relationship between human activities and metal concentration gradients.     

Structural improvement of age-hardened gypsum-treated bauxite red mud waste using readily decomposable phyto-organics

Several years (7) after incidental lithification by added gypsum, the effect of crushing and phyto-organics on some physical properties of red mud wastes (RMW) was examined under laboratory conditions. It was hypothesized that mechanically breaking up the hardened masses would increase their permeability. However, on the contrary, crushing these rock-hard masses into <2-mm particles did not increase permeability. A phyto-organic treatment on the other hand greatly improved permeability of the crushed entities such that infiltration rates increased from 0 to 10 cm/h. After 24 weeks of incubation, the structure of the newly formed phyto-organically treated gypsum-hardened RMW aggregates was also substantially improved over that of the controls, as a >3-fold increase in resistance to disintegration during wet sieving was exhibited by the phyto-organically treated samples. The increase in water infiltration by combining crushing with phyto-organic applications was ascribed to a decrease in particle dispersion, creating more stable clay clusters, which in turn stabilized channels and pores. Conversely, it was concluded that the singular crushing of gypsum-hardened bauxite waste in the waste dumps is potentially wasteful and ineffective.     

Bias of ostracod stable isotope data caused by drying of sieve residues from water

Stable isotope analysis of ostracod shells is used routinely for palaeoenvironmental studies of ostracod-bearing records. Sample treatment usually involves the disaggregation of sediments and sieving; before the sieving residues were washed with water onto petri dishes and oven-dried. In our study, we compared δ¹⁸O and δ¹³C values of shells that were oven-dried from water and from ethanol alternatively. Large isotopic differences of up to 3‰ were determined for δ¹⁸O values, whereas differences in δ¹³C values were less pronounced with differences of up to 1.6‰. Stable isotope values of shells dried from water were lower for both oxygen and carbon as a result of calcite crystals precipitated on the shell surfaces during the drying process. Therefore, ostracod shells for stable isotope analysis should not be prepared by drying from water. Instead, shells should be dried from ethanol to obtain reliable stable isotope data; likewise freeze-drying is expected to provide trustworthy results.     

Farmers＇ vulnerability to flood risk： A case study in the Poyang Lake Region

This paper quantitatively explores farmers＇ vulnerability to flood in the Poyang Lake Region （PLR） with the supports of GIS spatial functions. The analysis consists of three major steps, which is based on the spatial unit of township. Firstly, the spatial extent and characteristics of flood risk areas were determined using a digital elevation model （DEM） derived from the 1：50,000 topographic map. Secondly, for each of the township, six indices indicating the economic activities of local farmers were calculated. These indices are： rural population proportion, cultivated land proportion, GDP per unit area, employment proportion of primary industry, net rural income per capita and agricultural income proportion. These six indices were then normalized and used for later vulnerability assessment. Thirdly, the normalized indices （as GIS data layers） were overlaid with the flood risk areas to produce the risk coefficient for each township and to calculate the overall vulnerability for each township. The analysis results show that in the PLR there are high flood risk areas where the farmers＇ livings are seriously influenced or threatened. About 55.56% of the total 180 townships in the flood risk areas have a high degree of flood vulnerability. The townships under flood risk are mainly distributed in the areas around the Poyang Lake and the areas along the ＂five rivers＂.     

Capacity of soil loss control in the Loess Plateau based on soil erosion control degree

The capacity of soil and water conservation measures, defined as the maximum quantity of suitable soil and water conservation measures contained in a region, were determined for the Loess Plateau based on zones suitable for establishing terraced fields, forestland and grassland with the support of geographic information system (GIS) software. The minimum possible soil erosion modulus and actual soil erosion modulus in 2010 were calculated using the revised universal soil loss equation (RUSLE), and the ratio of the minimum possible soil erosion modulus under the capacity of soil and water conservation measures to the actual soil erosion modulus was defined as the soil erosion control degree. The control potential of soil erosion and water loss in the Loess Plateau was studied using this concept. Results showed that the actual soil erosion modulus was 3355 t?km^-2?a^-1, the minimum possible soil erosion modulus was 1921 t?km^-2?a^-1, and the soil erosion control degree was 0.57 (medium level) in the Loess Plateau in 2010. In terms of zoning, the control degree was relatively high in the river valley-plain area, soil-rocky mountainous area, and windy-sandy area, but relatively low in the soil-rocky hilly-forested area, hilly-gully area and plateau-gully area. The rate of erosion areas with a soil erosion modulus of less than 1000 t?km^-2?a^-1 increased from 50.48% to 57.71%, forest and grass coverage rose from 56.74% to 69.15%, rate of terraced fields increased from 4.36% to 19.03%, and per capita grain available rose from 418 kg?a^-1 to 459 kg?a^-1 under the capacity of soil and water conservation measures compared with actual conditions. These research results are of some guiding significance for soil and water loss control in the Loess Plateau.     

淮河流域水文随机方法的径流图化(英文)

Theoretical difficulties for mapping and for estimating river regime characteristics in a large-scale basin remain because of the nature of the variable under study: river flows are related to a specific area, i.e. the drainage basin, and are hierarchically organized in space through the river network with upstream-downstream dependencies. Another limitation is there are not enough gauge stations in developing countries. This presentation aims at de-veloping the hydro-stochastic approach for producing choropleth maps of average annual runoff and computing mean discharge along the main river network for a large-scale basin. The approach applied to mean annual runoff is based on geostatistical interpolation proce-dures coupled with water balance and data uncertainty analyses. It is proved by an applica-tion in the upstream at Bengbu in the Huaihe River Basin, a typical large-scale basin in China. Hydro-stochasitic approach in a first step interpolates to a regular grid net and in a second step the grid values are integrated along rivers. The interpolation scheme includes a con-straint to be able to account for the lateral water balance along the rivers. Grid runoff map with 10 km × 10 km resolution and the discharge map along the river with the 1 km basic length unit are the main results in this study. This kind of statistic approach can be widely used be-cause it avoids the complexity of hydrological models and does not depend on the meteoro-logical data.     

Coal deposits of the United States

The coal fields of the Unites States can be divided into six major provinces. The Appalachian and Interior Provinces contain dominantly bituminous coal in strata of Pennsylvanian age. The coal seams are relatively thin and are mined both by surface and underground methods. Sulfyur content is low to moderate in the Appalachian Province, generally high in the Interior province. The Gulf Coastal Plain Province, in Texas and neighboring states, contains lignite of Eocene age. The seams are 3–25 ft (0.9–7.5 m) thick and are minded in large open pits. The Northern Great Plains Province has lignite and subbituminous coal of Cretaceous, Paleocene and Eocene age. The coal, largely very low in sulfur, occurs in beds up to 100 ft (30 m) thick and is strip-mined. The Rocky Mountain Province contains a great variety of coal deposits in numerous separate intermontane basins. Most of it is low-sulfur subbituminous to bituminous coal iof Creatceous and early Tertiary age. The seams range from a few feet to over 100 ft (30 m) thick. Strip-mining dominates but underground mines are important in Utah and Colorado. The Pacific Coast Province, which includes Alaska, contains enormous cola resources but has seen little mining. The coal is highly diverse in physical character and geologic setting.     

Spinel peridotite xenoliths from the Tariat Depression, Mongolia. II: Geochemistry and Nd and Sr isotopic composition and their implications for the evolution of the subcontinental lithosphere

A suite of spinel peridotite xenoliths from the Shavaryn-Tsaram volcano, Tariat Depression (central Mongolia) represents (for major elements) fertile to moderately depleted subcontinental lithosphere. Part of the variation of moderately incompatible trace elements is ascribed to small-scale mineralogical heterogeneities caused by processes like metamorphic differentiation accompanying partial melting or by mechanical segregation. Several bulk lherzolites show a high relative enrichment of the LREE over HREE which can be traced to a grain boundary phase genetically linked to, but not directly representing, the host basanitoid. In Nd and Sr isotopic composition the anhydrous peridotites cover the field of oceanic basalts (¹⁴³Nd/¹⁴⁴Nd = 0.5128-0.5133, ⁸⁷Sr/⁸⁶Sr = 0.7020-0.7039). In contrast, a phlogopite peridotite has a high ⁸⁷Sr/⁸⁶Sr and also a less radiogenic ¹⁴³Nd/¹⁴⁴Nd. The majority of “dry” lherzolites have Nd and Sr “bulk earth” model ages around 2 Ga. They may be interpreted as dating a small-degree (< ˜5%) melting event which would not have severely affected the major element chemistry of the xenoliths. The ˜2 Ga model ages may indicate a genetic relation between the lithospheric mantle and the stabilization of the continental crust in Mongolia at that time. Alternatively, if the peridotites are unrelated to the overlying crust, they may be pieces of a young asthenospheric diapir. Coexisting ortho-and clinopyroxenes are in Nd isotopic equilibrium for Iherzolites having equilibrated at temperatures around 950°C at mantle pressures. Disequilibrium melting models of mantle rocks are not supported by our data because for medium to coarse-grained mantle spinel peridotite the Rb-Sr and Sm-Nd isotopic systems close with respect to diffusional exchange at temperatures around 900°C, as indicated by recently published diffusion experiment results and supported by our data.     

Duplex structures in the lewis thrust sheet, crowsnest pass, rocky mountains, Alberta, Canada

The Lewis thrust sheet of the southern Canadian Rocky Mountains contains many spectacular examples of small-scale duplex structures. This paper presents the results of a detailed analysis of such structures found in the Mississippian carbonates of the Banff Formation at Crowsnest Pass, southwestern Alberta.Foreland dipping, hinterland dipping and antiformal stacked duplexes are found in the hangingwall of the Lewis thrust. Out-of-sequence thrusts, back thrusts and folds that push out of the plane of the cross-section, termed lateral lobes, give rise to complex internal geometries. Dominant slip vectors are towards 080–090° but the complex fault geometries have generated significant variations in slip away from this direction. The duplex structures occur as discrete thrust fault-bounded packages with each package having different slip vectors. The panels above and below the duplex structures show consistent slip vectors towards 080–090° whereas the duplexes exhibit a wide scatter of slip vectors from 350–160°. The stacking of duplexes with many horses can be likened to the stacking of many inverted soup bowls, herein termed turtle back structures, and will involve a wide scatter of slip directions, particularly if the horses are of limited lateral extent. Such a stacking mechanism involving out-of-section movement invalidates the assumption of two-dimensional plane strain in the plane of the cross-section that contains the regional tectonic transport direction. Correctly balanced cross-sections cannot be constructed through such stacked duplex structures as described in this paper.