Geochemical processes in a Mediterranean Lake: a high-resolution study of the last 4,000 years in Zoñar Lake,southern Spain

High-resolution geochemical analysis of a 6-m-long sediment core from Zoñar Lake, southern Spain, provides a detailed characterization of major changes in lake and watershed processes during the last 4,000 years. Geochemical variables were used as paleolimnological indicators and complement Zoñar Lakes’s paleoenvironmental reconstruction based on sedimentological and biological proxies, which define periods of increasing allochthonous input to the lake and periods of dominant autochthonous sedimentation. Chemical ratios identify periods of endogenic carbonate formation (higher Ca/Al, Sr/Al and Ba/Al ratios), evaporite precipitation (higher S/Al, Sr/Al ratios), and anoxic conditions (higher Mo/Al, U/Th ratios and Eu anomaly). Higher productivity is marked by elevated organic carbon content and carbonate precipitation (Mg/Ca). Hydrological reconstruction for Zoñar Lake was based on sedimentological, mineralogical and biological proxies, and shows that lower lake levels are characterized by Sr-rich sediments (a brackish lake with aragonite) and S-rich sediments (a saline lake with gypsum), while higher lake levels are characterized by sediments enriched in elements associated with alumino-silicates (Al, K, Ti, Fe, trace and rare earth elements), reflecting fresher conditions. Geochemical indicators also mark periods of higher detrital input to the lake related to human activity in the watershed: (1) during the Iberian Roman Humid Period (650 BC–AD 300), around the onset of the Little Ice Age (AD 1400), during the relatively drier Post-Roman and Middle Ages (AD 800–1400), and over the last 50 years, due to mechanized farming practices. Heavy metal enrichment in the sediments (Cu and Ni) suggests intensification of human activities during the Iberian Roman Period, and the use of fertilizers during the last 50 years.     

Delivery and deposition of organic matter in surface sediments of Lagoa do Caçó (Brazil)

Elemental and isotopic compositions of organic matter in surficial sediments from five transects across Lagoa do Caçó (Brazil) were analyzed to identify the depth-related processes that affect the production and deposition of sedimentary organic matter in this shallow tropical lake. Each of four transverse transects began at a margin dominated by aquatic macrophytes (Eleocharis), crossed the central deep part of the lake, and terminated in the opposite, macrophyte-dominated margin. In each transect, TOC concentrations, C/N ratios, and δ¹³C values decreased between 0 and 4 m, whereas δ¹⁵N values increased. The variables remained stable in sediment from 4 m water depth to the center of the lake at 10 m. The depth-related patterns reflect differences in both the delivery and the deposition of organic matter in the lake. Organic matter is produced in abundance in the marginal area by emersed and submerged macrophyte vegetation that diminishes with depth and disappears at 4 meters. After the disappearance of macrophytes, organic matter is produced at low rates principally by open-lake phytoplankton. Drawdown of dissolved oxygen is high in the lake margins, but it is low in the oligotrophic open waters of the lake. Preservation of organic matter is consequently better in sediments of the lake margins than in deep waters. The depth-related pattern of organic matter delivery and deposition in the sediments of Lagoa do Caçó, in which water levels are sensitive to groundwater fluctuations, shows that the elemental and isotopic compositions of sediment organic matter can provide a record of changes in the paleohydrology of this and other similar shallow lake systems.     

Depositional processes on oceanic island shelves – Evidence from storm‐generated Neogene deposits from the mid‐North Atlantic

Oceanic islands – such as the Azores in the mid‐North Atlantic – are periodically exposed to large storms that often remobilize and transport marine sediments along coastlines, and into deeper environments. Such disruptive events create deposits – denominated tempestites – whose characteristics reflect the highly dynamic environment in which they were formed. Tempestites from oceanic islands, however, are seldom described in the literature and little is known about storm‐related sediment dynamics affecting oceanic island shelves. Therefore, the geological record of tempestite deposits at oceanic islands can provide invaluable information on the processes of sediment remobilization, transport and deposition taking place on insular shelves during and after major storms. In Santa Maria Island (Azores), a sequence of Neogene tempestite deposits was incorporated in the island edifice by the ongoing volcanic activity (thus preserved) and later exposed through uplift and erosion. Because it was overlain by a contemporary coastal lava delta, the water depth at the time of deposition could be inferred, constituting an excellent case‐study to gain insight on the still enigmatic processes of insular shelf deposition. Sedimentological, palaeontological, petrographic and palaeo‐water depth information allowed the reconstruction of the depositional environment of these sediments. The sequence typifies the characteristics of a tempestite (or successive tempestites) formed at ca 50 m depth, in a steep, energetic open insular shelf, and with evidence for massive sediment remobilization from the nearshore to the middle or outer shelf. The authors claim that cross‐shelf transport induced by storm events is the main process of sediment deposition acting on steep and narrow shelves subjected to high‐energetic environments, such as the insular shelves of open‐sea volcanic islands.     

Petrogenetic links between lepidolite-subtype aplite-pegmatite,aplite veins and associated granites at Segura (central Portugal)

In the Segura area, Variscan S-type granites, aplite veins and lepidolite-subtype granitic aplite-pegmatite veins intruded the Cambrian schist-metagraywacke complex. The granites are syn D3. Aplite veins also intruded the granites. Two-mica granite and muscovite granite have similar ages of 311.0 ± 0.5 Ma and 312.9 ± 2.0 Ma but are not genetically related, as indicated by their geochemical characteristics and (⁸⁷Sr/⁸⁶Sr)₃₁₁ values. They correspond to distinct pulses of magma derived by partial melting of heterogeneous metapelitic rocks. Major and trace elements suggest fractionation trends for: (a) muscovite granite and aplite veins; (b) two-mica granite and lepidolite-subtype aplite-pegmatite veins, but with a gap in most of these trends. Least square analysis for major elements, and modeling of trace elements, indicate that the aplite veins were derived from the muscovite granite magma by fractional crystallization of quartz, plagioclase, K-feldspar and ilmenite. This is supported by the similar (⁸⁷Sr/⁸⁶Sr)₃₁₁ and δ¹⁸O values and the behavior of P₂O₅ in K-feldspar and albite. The decrease in (⁸⁷Sr/⁸⁶Sr)₃₁₁ and strong increase (1.6‰) in δ¹⁸O from two-mica granite to lepidolite-subtype aplite-pegmatite veins, and the behaviors of Ca, Mn and F of hydroxylapatite indicate that these veins are not related to the two-mica granite.     

Impact of the 11 March 2011, Great East Japan earthquake and tsunami on the chemical industry

The Great East Japan earthquake and tsunami damaged or destroyed many industrial facilities housing or processing hazardous substances, such as refineries, petrochemical facilities and other types of chemical industry. This showed that also generally well prepared countries are at risk of suffering natural hazard triggered technological (Natech) accidents. An analysis of data collected from open sources and through interviews with authorities was performed to understand the main reasons for the industrial damage and downtime as well as the extent of hazardous-materials releases and the associated impact on society. The analysis of the data set confirmed the findings from other studies with respect to main damage and failure modes, as well as hazardous-materials release paths. In addition, gaps in Natech risk management were identified. Based on the data analysis and interviews lessons learned in support of a more far-reaching Natech risk management are presented.     

Surface changes on crystalline stones due to salt crystallisation

This study assesses the changes on the surface of crystalline stones due to salt crystallisation. Efflorescence was forced to grow on the surface of granite and marbles through 60 cycles of salt crystallisation with sodium sulphate. Changes on surface roughness, gloss and colour were measured every 15 cycles and the specimens were examined with naked eye and SEM. Sodium sulphate produces damage which depends on mineral composition. Results show that granites experience a mechanical decay with an increase in roughness. Peaks of mica can be observed on the surface and cracks widen and grow deeper. Colour and gloss do not show any significant change, although gloss decreases with an increase in surface roughness. In marbles, the decay is mainly chemical. Surface roughness increases due to dissolution of the calcite. White marbles exhibit yellowing. Gloss decreases during the first cycles—as grain boundaries become more visible—but tends to regain almost its initial value as the number of cycles increases. In this case, gloss does not show any relation with surface roughness.     

Application of HF radar currents to oil spill modelling

In this work, the benefits of high-frequency (HF) radar currents for oil spill modeling and trajectory analysis of floating objects are analyzed. The HF radar performance is evaluated by means of comparison between a drifter buoy trajectory and the one simulated using a Lagrangian trajectory model. A methodology to optimize the transport model performance and to calculate the search area of the predicted positions is proposed. This method is applied to data collected during the Galicia HF Radar Experience. This experiment was carried out to explore the capabilities of this technology for operational monitoring along the Spanish coast. Two long-range HF radar stations were installed and operated between November 2005 and February 2006 on the Galician coast. In addition, a drifter buoy was released inside the coverage area of the radar. The HF radar currents, as well as numerical wind data were used to simulate the buoy trajectory using the TESEO oil spill transport model. In order to evaluate the contribution of HF radar currents to trajectory analysis, two simulation alternatives were carried out. In the first one, wind data were used to simulate the motion of the buoy. In the second alternative, surface currents from the HF radar were also taken into account. For each alternative, the model was calibrated by means of the global optimization algorithm SCEM-UA (Shuffled Complex Evolution Metropolis) in order to obtain the probability density function of the model parameters. The buoy trajectory was computed for 24 h intervals using a Monte Carlo approach based on the results provided in the calibration process. A bivariate kernel estimator was applied to determine the 95% confidence areas. The analysis performed showed that simulated trajectories integrating HF radar currents are more accurate than those obtained considering only wind numerical data. After a 24 h period, the error in the final simulated position improves using HF radar currents. Averaging the information from all the simulated daily periods, the mean search and rescue area calculated using HF radar currents, is reduced by approximately a 62% in comparison with the search area calculated without these data. These results show the positive contribution of HF radar currents for trajectory analysis, and demonstrate that these data combined with atmospheric forecast models, are of value for trajectory analysis of oil spills or floating objects.     

New constraints on the HIMU mantle from neon and helium isotopic compositions of basalts from the Cook–Austral Islands

High ⁴He/³He ratios of 100 000 to 160 000 found at HIMU ocean islands (“high μ,” where μ is the U/Pb ratio) are usually attributed to the presence of recycled oceanic crust in the HIMU mantle source. However, significantly higher ⁴He/³He ratios are expected in recycled crust after residence in the mantle for periods greater than 1 Ga. In order to better understand the helium isotopic signatures in HIMU basalts, we have measured helium and neon isotopic compositions in a suite of geochemically well-characterized basalts from the Cook–Austral Islands. We observe ⁴He/³He ratios ranging from 56 000 to 141 000, suggesting the involvement of mantle reservoirs both more and less radiogenic than the mantle source for mid-ocean ridge basalts (MORBs). In addition, we find that the neon isotopic compositions of HIMU lavas extend from the MORB range to compositions less nucleogenic than MORBs. The Cook-Austral HIMU He–Ne isotopic compositions, along with Sr, Nd, Pb, and Os isotopic compositions, indicate that in addition to recycled crust, a relatively undegassed mantle end-member (e.g., FOZO) is involved in the genesis of these basalts. The association of relatively undegassed mantle material with recycled crust provides an explanation for the close geographical association between HIMU lavas and EM (enriched mantle)-type lavas from this island chain: EM-type signatures represent a higher mixing proportion of relatively undegassed mantle material. Mixing between recycled material and relatively undegassed mantle material may be a natural result of entrainment processes and convective stirring in deep mantle.     

Time dependence of negative buoyancy and the subduction of continental lithosphere

The time evolution of negative buoyancy of a subducting slab is modelled from the beginning of subduction under various kinematic conditions (dip angle and subduction velocity). The calculations take into account the thermal and density effects of the variations of the thermophysical parameters with temperature and pressure, and of phase transitions. The magnitude of the negative buoyancy increases during subduction of oceanic lithosphere, up to values in the (2–4) × 10¹³ N m⁻¹ range when the tip of the slab reaches a depth of 600–700 km. If continental material arrives at the trench and is subducted, the downward buoyancy decreases by an amount proportional to the volume of the subducted continental crust. Assuming that subduction stops when the buoyancy becomes zero, and that delamination of the continental crust or slab breakoff do not occur, the maximum downdip length of the subductable continental crust is estimated as a function of the dip angle, subduction velocity and geometry of the margin. In most cases, subduction of continental material down to depths of 100–250 km is possible, and continental subduction can continue for times up to 10–15 Ma if the velocity is low. These estimates are not significantly affected by the hypothetical occurrence of a metastable olivine wedge within the slab, and could be lower bounds if the lower continental crust is mafic and transforms to eclogite.