A new design of the LAPS land surface scheme for use over and through heterogeneous and non-heterogeneous surfaces: Numerical simulations and tests

Numerical simulations and tests with the recently redesigned land–air parameterization scheme (LAPS) are presented. In all experiments, supported either by one-point micrometeorological, 1D or 3D simulations, the attention has been directed to: (1) comparison of simulation outputs, expressing the energy transfer over and through heterogeneous and non-heterogeneous surfaces, versus observations and (2) analysis of uncertainties occurring in the solution of the energy balance equation at the land–air interface. To check the proposed method for aggregation of albedo, “propagating hole” sensitivity tests with LAPS over a sandstone rock grid cell have been performed with the forcing meteorological data for July 17, 1999 in Baxter site, Philadelphia (USA). Micrometeorological and biophysical measurements from the surface experiments conducted over crops and apple orchard in Serbia, Poland, Austria and France were used to test the operation of LAPS in calculating surface fluxes and canopy environment temperatures within and above plant covers of different densities. In addition, sensitivity tests with single canopy covers over the Central Europe region and comparison against the observations taken from SYNOP data using 3D simulations were made. Validation of LAPS performances over a solid surface has been done by comparison of 2 m air temperature observations against 5-day simulations over the Sahara Desert rocky ground using 3D model. To examine how realistically the LAPS simulates surface processes over a heterogeneous surface, we compared the air temperature measured at 2 m and that predicted by the 1D model with the LAPS as the surface scheme. Finally, the scheme behaviour over urban surface was tested by runs over different parts of a hypothetical urban area. The corresponding 1D simulations were carried out with an imposed meteorological dataset collected during HAPEX-MOBILHY experiment at Caumont (France). The quantities predicted by the LAPS compare well with the observations and the various subcomponents of the scheme appear to operate realistically.     

Changes in heat wave characteristics over Extremadura (SW Spain)

Theoretical and Applied Climatology - Heat wave (HW) events are becoming more frequent, and they have important consequences because of the negative effects they can have not only on the human...     

Combining climate with other influential factors for modelling the impact of climate change on species distribution

We tested two approaches to forecast species distributions while balancing the impact of climate change against the inertia promoted by other influential factors that have been forecast as not changing. Given that mountain species are presumed to be more at risk due to climate warming, we selected an amphibian, a reptile, a bird, and a mammal species present in the Spanish mountains, to model their distributional response to climate change during this century. The climatic forecasts were made according to the general circulation models CGCM2 and ECHAM4 and to the A2 and B2 emission scenarios. We modelled the response of the species to spatial, topographic, human, and climatic variables separately. In our first approach, we compared each of these single-factor models using the Akaike Information Criterion, and produced a combined model weighting each factor (spatial, topographic, human, and climatic) according to Akaike weights. This procedure overestimated the best model, and the other factors were neglected in the combined model output. In our second approach, we produced a combined model using stepwise selection of the variables previously selected within each factor. In this way every factor was effectively represented in the combined explanatory model of the distributional response of the species to environmental conditions. This enabled the construction of models that combined climate with the other explanatory factors, to be later extrapolated to the future by replacing current climatic and human values with those expected from each emission and socio-economic scenario, while preserving spatial and topographic variables in the model.     

Land use dynamics in Brazilian La Plata Basin and anthropogenic climate change

The La Plata Basin (LPB) is one of the most important regions for agriculture and livestock production in South America, playing a central role in the world food production and food security. Within its borders is also located the whole Brazilian Pantanal region. Identifying the most important land use sectors in LPB as well as the changes observed in the past years is fundamental to recognize which areas of the basin might be more vulnerable to climate change in order to design adaptation strategies. A general characterization of land use and livestock production of Brazilian LPB was done by using the System of Automatic Retrieving (SIDRA) of Brazilian Institute of Geography and Statistics (IBGE) platform as the major source of data. It was observed expressive increases in land areas used for temporary crops, such as soybean, sugarcane, and maize, as well as increases in poultry and swine production. These important changes in agricultural land use and livestock production are currently associated to non-climatic drivers, but this dynamic might be strongly affected by the consequences of climate change and variability, with negative socio-economic impacts for the whole region.     

Winter-to-spring temperature dynamics in Turkey derived from tree rings since AD 1125

In the eastern Mediterranean in general and in Turkey in particular, temperature reconstructions based on tree rings have not been achieved so far. Furthermore, centennial-long chronologies of stable isotopes are generally also missing. Recent studies have identified the tree species Juniperus excelsa as one of the most promising tree species in Turkey for developing long climate sensitive stable carbon isotope chronologies because this species is long-living and thus has the ability to capture low-frequency climate signals. We were able to develop a statistically robust, precisely dated and annually resolved chronology back to AD 1125. We proved that variability of δ¹³C in tree rings of J. excelsa is mainly dependent on winter-to-spring temperatures (January–May). Low-frequency trends, which were associated with the medieval warm period and the little ice age, were identified in the winter-to-spring temperature reconstruction, however, the twentieth century warming trend found elsewhere could not be identified in our proxy record, nor was it found in the corresponding meteorological data used for our study. Comparisons with other northern-hemispherical proxy data showed that similar low-frequency signals are present until the beginning of the twentieth century when the other proxies derived from further north indicate a significant warming while the winter-to-spring temperature proxy from SW-Turkey does not. Correlation analyses including our temperature reconstruction and seven well-known climate indices suggest that various atmospheric oscillation patterns are capable of influencing the temperature variations in SW-Turkey.     

Moisture transport and intraseasonal variability in the South America monsoon system

This paper examines moisture transport on intraseasonal timescales over the continent and over the South Atlantic convergence zone (SACZ) during the South America (SA) summer monsoon. Combined Empirical Orthogonal Function analysis (EOFc) of Global Precipitation Climatology Project pentad precipitation, specific humidity, air temperature, zonal and meridional winds at 850?hPa (NCEP/NCAR reanalysis) are performed to identify the large-scale variability of the South America monsoon system and the SACZ. The first EOFc was used as a large-scale index for the South American monsoon (LISAM), whereas the second EOFc characterized the SACZ. LISAM (SACZ) index showed spectral variance on 30?C90 (15?C20) days and were both band filtered (10?C100?days). Intraseasonal wet anomalies were defined when LISAM and SACZ anomalies were above the 75th percentile of their respective distribution. LISAM and SACZ wet events were examined independently of each other and when they occur simultaneously. LISAM wet events were observed with the amplification of wave activity in the Northern Hemisphere and the enhancement of northwesterly cross-equatorial moisture transport over tropical continental SA. Enhanced SACZ was observed with moisture transport from the extratropics of the Southern Hemisphere. Simultaneous LISAM and SACZ wet events are associated with cross-equatorial moisture transport along with moisture transport from Subtropical Southwestern Atlantic.     

Amazon forest biomass density maps: tackling the uncertainty in carbon emission estimates

As land use change (LUC), including deforestation, is a patchy process, estimating the impact of LUC on carbon emissions requires spatially accurate underlying data on biomass distribution and change. The methods currently adopted to estimate the spatial variation of above- and below-ground biomass in tropical forests, in particular the Brazilian Amazon, are usually based on remote sensing analyses coupled with field datasets, which tend to be relatively scarce and often limited in their spatial distribution. There are notable differences among the resulting biomass maps found in the literature. These differences subsequently result in relatively high uncertainties in the carbon emissions calculated from land use change, and have a larger impact when biomass maps are coded into biomass classes referring to specific ranges of biomass values. In this paper we analyze the differences among recently-published biomass maps of the Amazon region, including the official information used by the Brazilian government for its communication to the United Nation Framework on Climate Change Convention of the United Nations. The estimated average pre-deforestation biomass in the four maps, for the areas of the Amazon region that had been deforested during the 1990–2009 period, varied from 205?±?32 Mg ha^?1 during 1990–1999, to 216?±?31 Mg ha^?1 during 2000–2009. The biomass values of the deforested areas in 2011 were between 7 and 24 % higher than for the average deforested areas during 1990–1999, suggesting that although there was variation in the mean value, deforestation was tending to occur in increasingly carbon-dense areas, with consequences for carbon emissions. To summarize, our key findings were: (i) the current maps of Amazonian biomass show substantial variation in both total biomass and its spatial distribution; (ii) carbon emissions estimates from deforestation are highly dependent on the spatial distribution of biomass as determined by any single biomass map, and on the deforestation process itself; (iii) future deforestation in the Brazilian Amazon is likely to affect forests with higher biomass than those deforested in the past, resulting in smaller reductions in carbon dioxide emissions than expected purely from the recent reductions in deforestation rates; and (iv) the current official estimate of carbon emissions from Amazonian deforestation is probably overestimated, because the recent loss of higher-biomass forests has not been taken into account.     

On-the-fly server-based aerial imagery management system

Aerial images are valuable products when dealing with both geospatial and geotemporal analysis. Nowadays, they are widely used for many different purposes and by an extensive public, including private companies, official administrations and individual users. Although in the past few years there has been an increasing interest in showing all kinds of geographical information on the World Wide Web, access to aerial imagery and its dissemination are still difficult and lack flexibility. This paper introduces an aerial imagery management system based on client–server principles, operated so as to allow users quick and efficient queries, processing and management of huge sets of photogrammetric imagery stored on raster servers. It is a novel product that is ready to provide image-based cartographic data available in public and private digital warehouses, facilitating all the required visualisations and queries, as well as geometric and radiometric processing on the fly. This paper shows the design, system architecture and various functionalities of the system in a real-life scenario.