Geochemical characteristics of crude oils from Well Zheng-1 in the Junggar Basin, Xinjiang, China

Well Zheng-1 is located in the combined area of the central uplift and the north Tianshan piedmont depression in the Junggar Basin. Two oil-bearing beds are recognized at 4788–4797 m of the Lower Cretaceous Tugulu Formation (K1tg) and 4808.5–4812.5 m of the Lower Jurassic Sangonghe Formation (J1s). The geochemical characteristics of family composition, carbon isotopic composition, saturated hydrocarbons, sterane and terpane biomarkers and carotane of two crude oils are described in this paper. The results show that the geochemical characteristics of the two crude oils are basically similar to each other, indicating they were all derived mainly from the high mature, brine, algae-rich lake facies sediments. Oil-source correlation revealed that crude oils of the two beds were derived mainly from the source rocks of Permian and mixed by the oil derived from the source rocks of Jurassic and Triassic. This is consistent with the geological background with several sets of source rocks in the area studied.     

An 8.1Ma calcite record of Asian summer monsoon evolution on the Chinese central Loess Plateau

Carbonates in loess-red clay sequences consist mainly of calcite and dolomite. The EDTA analysis of carbonates in different size fractions and magnetic susceptibility reveal that calcite is a sensitive index of summer monsoon. The chemical analysis of carbonates and calcite from an 8.1 Ma loess-red clay sequence at Chaona on the Chinese central Loess Plateau shows that the evolution of the Asian summer monsoon experienced four stages, namely 8.1―5.5 Ma, 5.5―2.8 Ma, 2.8―1.5 Ma and 1.5―0 Ma, with increasing intensification and fluctuation, suggesting a possible combining impacts of uplift of the Tibetan Plateau and global changes on the Asian summer monsoon.     

Chronology of an oyster reef on the coast of Bohai Bay, China: Constraints from optical dating using different luminescence signals from fine quartz and polymineral fine grains of coastal sediments

Fossil oyster reefs are indicators of past sea levels, and their formation is usually dated by means of radiocarbon. However, radiocarbon dating of the shells from coastal areas may be complicated by the varying sources of carbon. Here we applied optical dating methods to date the samples from above and below a fossil oyster bed in a section on the coast of Bohai Bay, China. The optical ages of the sediments were used to constrain the oyster bed. Single-aliquot regenerative-dose procedures using the OSL signal from fine grain quartz, the IRSL and post-IR OSL signals from polymineral fine grains were employed to determine equivalent dose (D_e). The behaviors of the different luminescence signals from quartz and polymineral grains during D_e measurements were examined. The results showed that the quartz OSL signal is more reliable than the polymineral IRSL and post-IR OSL signals with respect to dating for these coastal samples. The optical ages indicated that the oyster reef formed between ca. 6.2 and 5.0 ka.     

Mineral Components, Texture, and Forming Conditions of Hydrothermal Chimney on the East Pacific Rise at 9°-10°N

To characterize the hydrothermal processes of East Pacific rise at 9°-10°N, sulfide mineral compositions, textural, and geochemical features of chimney ores were studied using ore microscope,scanning electron microscope, X-ray diffraction analysis, and electron microprobe techniques. Results show that there are three mineral assemblages for the hydrothermal chimney ores, namely：（i） anhydrite ＋ marcasite ＋ pyrite, （ii） pyrite ＋ sphalerite ＋ chalcopyrite, and （iii） chalcopyrite ＋ bornite ＋ digenite ＋ covellite. Mineral assemblages, zonational features, and geochemical characteristics of the ore minerals indicate that ore fluid temperature changed from low to high then to low with a maximum temperature up to 400 ℃. The chimney is a typical black smoker. The initial structure of the chimney was formed by the precipitation of anhydrites, and later the sulfides began to precipitate in the inner wall.     

覆膜态Fe（OH）3在厌氧条件下生物降解苯和甲苯的初探

天然条件下氯代烃的污染经常会与石油烃的污染共存,对于这种混合污染羽的治理,第一步采用粒状铁还原氯代烃,后续利用微生物和第一步产生的副产物生物降解石油烃。苯系物是石油烃中毒性较大、存留时间较长的污染物,本文利用批实验的方法研究了厌氧条件下用Fe(OH)3覆膜于石英砂表面的Fe(Ⅲ)作为电子受体降解苯和甲苯。结果表明,Fe(Ⅲ)作为电子受体时苯和甲苯能够发生厌氧生物降解,经过驯化后苯和甲苯的降解速度明显加快。降解实验表明甲苯的降解速度比苯的降解速度快,苯降解的半衰期是4.02d,甲苯降解的半衰期是3.81d。     

南昌市城区暴雨积水的数值模拟

论述了南昌市城市暴雨积水仿真系统的数学原理和开发成果,并应用实况降水对该系统的模拟精度进行测试。结果表明:大多数(62.6%)模拟计算结果的绝对误差在10 cm以内,只有极少数(2.4%)实际积水与模拟结果的误差超过30 cm。暴雨积水等级试验结果表明,中度以上暴雨积水地段的预报准确率达98%,轻度积水和无积水地段的预报准确率达92%。总体来看,暴雨积水趋势(等级)预报基本准确,定量(积水深度)预报有误差,平均相对误差为6%,模型的预测结果与实况基本相符。通过人工给定不同强度的雨量来模拟南昌市两个重点积水地段的积水过程,得到结论:当降水强度达到20 mm/h时,开始产生积水,降水强度超过30 mm/h时将产生严重积水;两个积水点因排水条件不一样,退水时间差异较大。排水条件差的地段,中—大雨需要15 h退完,暴雨需要24 h以上才能退完;在不同降水强度和排水条件下,最大积水深度出现的时间有明显区别;在暴雨情况下,绝大部分(76%)积水点的最大积水深度出现在2~3 h内。此外,讨论了模拟误差产生的原因。     

基于地性线的不规则三角网优化构建算法

提出了利用自动增加特征点消除平三角形的方法，并通过重构等高线验证了构网算法的实用性和有效性。实验表明，本文算法能很好地消除不合理的平三角形，优化三角网结构。     

测绘档案管理现代化的若干问题分析

在测绘科技快速发展的今天,建立现代化的测绘科技档案势在必行,但是目前测绘档案管理的方法和机制相对落后于测绘科技的发展。本文分析了测绘档案管理的现状和发展方向,在此基础上,指出了测绘档案管理的主要任务,以及测绘档案管理机构转型的必要性。     

一种基于网格的空间聚类方法在区域划分中的应用

区域划分是依据人口和社会经济指标将行政统计单元或其他地理实体划分成若干个不同水平或类别的集合。由于大多数的人口和社会经济指标来源于面状数据-行政统计单元,常用的区域划分的空间聚类方法是基于面状数据的,本文通过分析现有面状数据的聚类算法特点和不足,进而提出一种新的算法,该方法提出将面状统计单元进行网格划分,引入基于网格密度聚类算法的思想,克服现有面状聚类的诸多缺点,打破行政区划的限制,更好地发现潜在信息。     

中国萤石产业资源现状及发展建议

萤石是中国重要的战略性矿产资源。本文通过分析萤石资源现状、供需格局、产业发展以及近年来萤石行业发展面临的新形势和特点,为保障中国萤石产业可持续发展提出加大勘查投入、提高资源保障程度、合理有效开发、促进产业升级等建议。