Detection of model voids by identifying reverberation phenomena in GPR records

In order to improve the reliability of the ground penetrating radar (GPR) method in identifying subsurface sinkholes and karst cavities, laboratory investigations have been performed. The main objective of this work was to examine the relationship between horizontal/vertical voids dimensions and wavelengths of various antennas, and the corresponding GPR responses. Emphasis was given to the investigation of the factors that cause the appearance of reverberation phenomena in the signal pattern.The tests were conducted in 5 m × 10 m area by 2-m-deep trench filled with homogenous, dry sand. The voids models (empty fiberglass cylinders in diameters of 0.6 m, 1.0 m, 1.5 m and 2.4 m, with various heights) were buried vertically with their tops at depths of between 0.7 and 1.5 m. Investigations were performed for the various model conditions by towing 500, 300 and 100 MHz antennas along a pre-established grid, for the various model conditions.The GPR data collected using the 500 MHz bistatic antenna above the 1.0-m- and the 1.5-m-diameter cylinders, and using the 300 MHz bistatic antenna above the 1.5-m-diameter cylinder, confirmed the presence of a reverberation phenomenon, i.e. a strong convex signal pattern, containing a series of high amplitude extending oscillations with reduced frequency.Based on past practical GPR experience of void detection and presently obtained experimental data, two rules of thumbs may be adopted for the prediction of the appearance of resonant radar pictures:

1. The void diameter larger than the wavelength in air of the antenna used.

2. The vertical size of the empty void not significantly smaller than its horizontal dimension.

The strong reverberations generated by the inner surface of the void targets were found to approximate standing waves generated in cylindrical waveguides and waveguide resonators. The theoretical, experimental and practical results obtained concur.     

Complex exposure histories of chert clasts in the late Pleistocene shorelines of Lake Lisan,southern Israel

Activities of ²⁶Al and ¹⁰Be in five chert clasts sampled from two beach ridges of late Pleistocene Lake Lisan, precursor of the Dead Sea in southern Israel, indicate low rates of chert bedrock erosion and complex exposure, burial, and by inference, transport histories. The chert clasts were derived from the Senonian Mishash Formation, a chert‐bearing chalk, which is widely exposed in the Nahal Zin drainage basin, the drainage system that supplied most of the material to the beach ridges. Simple exposure ages, assuming only exposure at the beach ridge sampling sites, range from 35 to 354 ky; using the ratio ²⁶Al/¹⁰Be, total clast histories range from 0·46 to 4·3 My, unrelated to the clasts' current position and exposure period on the late Pleistocene beach ridges, 160–177 m below sea level. Optically stimulated luminescence dating of fine sediments from the same and nearby beach ridges yielded ages of 20·0 ± 1·4 ka and 36·1 ± 3·3 ka. These ages are supported by the degree of soil development on the beach ridges and correspond well with previously determined ages of Lake Lisan, which suggest that the lake reached its highest stand around 27 000 cal. years BP . If the clasts were exposed only once and than buried beyond the range of significant cosmogenic nuclide production, then the minimum initial exposure and the total burial times before delivery to the beach ridge are in the ranges 50–1300 ky and 390–3130 ky respectively. Alternatively, the initial cosmogenic dosing could have occurred during steady erosion of the source bedrock. Back calculating such rates of rock erosion suggests values between 0·4 and 12 m My^?1. The relatively long burial periods indicate extended sediment storage as colluvium on slopes and/or as alluvial deposits in river terraces. Some clasts may have been stored for long periods in abandoned Pliocene and early Pleistocene routes of Nahal Zin to the Mediterranean before being transported again back into the Nahal Zin drainage system and washed on to the shores of Lake Lisan during the late Pleistocene. Copyright © 2003 John Wiley & Sons, Ltd.     

Detecting thermal boundary control in surface flows from numerical dynamos

The geomagnetic field and secular variation exhibit asymmetrical spatial features which are possibly originating from an heterogeneous thermal control of the Earth's lower mantle on the core. The identification of this control in magnetic data is subject to several difficulties, some of which can be alleviated by the use of core surface flow models. Using numerical dynamos driven by heterogeneous boundary heat flux, we confirm that within the parameter space accessible to simulations, time average surface flows obey a simple thermal wind equilibrium between the Coriolis and buoyancy forces, the Lorentz, inertial and viscous forces playing only a secondary role, even for Elsasser numbers significantly larger than 1. Furthermore, we average the models over the duration of three vortex turnovers, and correlate them with a longer time average which fully reveals the signature of boundary heterogeneity. This allows us to quantify the possibility of observing mantle control in core surface flows averaged over a short time period. A scaling analysis is performed in order to apply the results to the Earth's core. We find that three vortex turnovers could represent between 100 and 360 years of Earth time, and that the heat flux heterogeneity at the core-mantle boundary could be large enough to yield an observable signature of thermal mantle control in a time average core surface flow within reach of the available geomagnetic data.     

Multifractal Analysis of Earthquakes in the Southeastern Iran-Bam Region

Earthquakes in Iran and neighbouring regions are closely connected to their position within the geologically active Alpine-Himalayan belt. Modern tectonic activity is forced by the convergent movements between two plates: The Arabian plate, including Saudi Arabia, the Persian Gulf and the Zagros Ranges of Iran, and the Eurasian plate. The intensive seismic activity in this region is recorded with shallow focal depth and magnitude rising as high as M_w = 7.8. The study region can be attributed to a highly complex geodynamic process and therefore is well suited for multifractal seismicity analysis. Multifractal analysis of earthquakes (m_b ≥ 3) occurring during 1973 – 2006 led to the detection of a clustering pattern in the narrow time span prior to all the large earthquakes: M_w = 7.8 on 16.9.1978; M_w = 6.8 on 26.12.2003; M_w = 7.7 on 10.5.97. Based on the spatio-temporal clustering pattern of events, the potential for future large events can be assessed. Spatio-temporal clustering of events apparently indicates a highly stressed region, an asperity or weak zone from which the rupture propagation eventually nucleates, causing large earthquakes. This clustering pattern analysis done on a well-constrained catalogue for most of the fault systems of known seismicity may eventually aid in the preparedness and earthquake disaster mitigation.     

Energy efficiency potentials for global climate change mitigation

Energy efficiency is one of the main options for mitigating climate change. An accurate representation of various mechanisms of energy efficiency is vital for the assessment of its realistic potential. Results of a questionnaire show that the EMF27 models collectively represent known channels of energy efficiency reasonably well, addressing issues of energy efficiency barriers and rebound effects. The majority of models, including general equilibrium models, have an explicit end-use representation for the transportation sector. All participating partial equilibrium models have some capability of reflecting the actual market behavior of consumers and firms. The EMF27 results show that energy intensity declines faster under climate policy than under a baseline scenario. With a climate policy roughly consistent with a global warming of two degrees, the median annual improvement rate of energy intensity for 2010–2030 reaches 2.3 % per year [with a full model range of 1.3–2.9 %/yr], much faster than the historical rate of 1.3 % per year. The improvement rate increases further if technology is constrained. The results suggest that the target of the United Nations’ “Sustainable Energy for All” initiative is consistent with the 2-degree climate change target, as long as there are no technology constraints. The rate of energy intensity decline varies significantly across models, with larger variations at the regional and sectoral levels. Decomposition of the transportation sector down to a service level for a subset of models reveals that to achieve energy efficiency, a general equilibrium model tends to reduce service demands while partial equilibrium models favor technical substitution.     

The Mw 7.5 2009 Coco earthquake, north Andaman region

The recent 10 August 2009 Coco earthquake (Mw 7.5), the largest aftershock of the giant 2004 Sumatra Andaman earthquake, occurred within the subducting India plate under the Burma plate. The Coco earthquake nucleated near the northwestern edge of the 2004 Sumatra-Andaman earthquake rupture under the unruptured updip segment of the plate boundary interface. The earthquake with predominant normal motion on approximately north-south to northeast-southwest oriented plane is very similar to the 27 June 2008 Little Andaman earthquake which occurred in the South Andaman region near the trench. We provide the only available estimate of coseismic offset due to the 2009 Coco earthquake at a survey-mode GPS site in the north Andaman, located about 60 km south of the Coco earthquake epicentre. The not so large coseismic displacement of about 2 cm in the ESE direction is consistent with the earthquake focal mechanism and its magnitude. We suggest that, like the 2008 Little Andaman earthquake, this earthquake too occurred on one of the approximately north-south to northeast-southwest oriented steep planes of the obliquely subducting 90°E ridge which was reactivated in normal motion after subduction, under the favourable influence of coseismic and ongoing postseismic deformation due to the 2004 Sumatra-Andaman earthquake. Another notable feature of this earthquake is its relatively low aftershock productivity. We suggest that the earthquake occurred very close to the aseismic region of the Irrawaddy frontal arc of very low seismicity where pre-existing faults are not so critically stressed and because of which the earthquake could trigger only a few aftershocks in its immediate vicinity.     

Implication of drainage basin parameters of Chhoti Gandak River,Ganga Plain,India

The drainage basin parameters of the groundwater-fed Chhoti Gandak River originating in the terai area of the Ganga Plain were analyzed using topographical sheets, satellite data, and field documentation with emphasis to its implication for flood mitigation and recharging of groundwater. The analyses indicate dominance of first order streams, gentle slope gradient, low surface run-off, low sediment production, high infiltration rate, and low value of basin relief. The low water storage capacity, spreading of water and concentration of peak discharge in the distal part of the river basin explain that whenever precipitation is high in the catchment area there is flood in the distal part of the basin. The bifurcation ratio value (4.34) of this basin describes that the drainage is carved naturally by slope and local relief and not influenced by geological structures like lineaments and faults.     

Natural hazards in the Ghaghara River area, Ganga Plain, India

The Ganga Plain is one of the most densely populated regions of the world due to its fertile soil and availability of water. The rivers of this plain are the lifeline for millions of people of this vast alluvial plain. All rivers of this plain are characterized by narrow channel confined within wide valley. Continuously increasing pressure of population on this plain has led to the intensification of settlement even into the valley of the river. This unplanned expansion has enhanced the damage due to flooding during high-discharge period and lateral erosion during low-discharge period. Flooding and lateral erosion are identified as fluvial hazards in the Ghaghara River area. Extensive studies have been carried out on flooding, but not much attention has been paid to the phenomenon of lateral erosion. However, it has been observed that lateral erosion is an independent fluvial hazard that operates during low-discharge period. Low degree of compaction due to the presence of sandy and silty facies in the river valley deposits, mass movement, palaeocurrent pattern, and fractures initiates and enhances the lateral erosion. The present paper deals with the fluvial hazards in the Ghaghara River area.