Vertical eddy diffusivity estimations in Swan river estuary

A field experiment is described in which diapycnal diffusivity is estimated by direct and indirect methods in Swan river estuary, Perth, Western Australia. The microstructure profiles were collected in a narrow and straight part of this estuary using a portable flux profiler (PFP). The profiles were segmented into stationary parts and the rate of vertical eddy diffusivity was estimated for the segments within the pycnocline. The direct measurement showed that instantaneous flux could be positive or negative with a low net rate of vertical eddy diffusivity for mass of about 6.5 × 10⁻⁸ m² s⁻¹. All the indirect methods overestimated this rate. However, within the indirect methods, the method of Osborn yielded the poorest estimate while the method of Osborn and Cox gave the closest estimate.     

The Recovery of Two Long-logged Headwaters in Temengor Reservoir,Perak,Malaysia

A study on water quality of the two long-logged and abandoned headwaters in Temengor Reservoir was conducted to determine their natural recovery.In this study,we used National Water Quality Standards for Malaysia prepared by Malaysian Department of Environment as an indicator for water quality recovery.The parameters measured were dissolved oxygen（mg/L）,water temperature（℃）,pH,conductivity（mS/cm）,total dissolved solids（mg/ L）,water velocity（m/s）,ortho-phosphate（PO₄-P）,nitrite-nitrogen（NO₂-N）,nitrate-nitrogen（NO₃,-N）and alkalinity. In general,water quality in Sungai Enam and Sungai Telang were in ClassⅠ,indicating water quality in both streams have recovered.Based on the t-test,Sungai Enam and Sungai Telang differed significantly in all parameters except for dissolved oxygen,NO₂-N and NO₃-N.In spatial analyses（upper,middle and lower reaches comparisons）, the two-way ANOVA analysis shows that there were significant differences in all studied parameters between the two rivers except for dissolved oxygen,total dissolved solids,NO₂-N and NO₃-N.Stream flow,hydrologic pathways,geomorphology,physical and environmental characteristics are essential elements in understanding the dynamics of water systems in Sungai Enam and Sungai Telang.Due to the recovery,these two headwaters are thus suitable for fish conservation and restoration sites.     

Evaluation on the two filling functions for the recovery of forest information in mountainous shadows on Landsat ETM + Image

In general,topographic shadow may reduce performance of forest mapping over mountainous regions in remotely sensed images.In this paper,information in shadow was synthesized by using two filling techniques,namely,roifill and imfill,in order to improve the accuracy of forest mapping over mountainous regions.These two methods were applied to Landsat Enhanced Thematic Mapper (ETM +) multispectral image from Dong Yang County,Zhejiang Province,China.The performance of these methods was compared with two conventi...     

The Himalayan cryosphere: A critical assessment and evaluation of glacial melt fraction in the Bhagirathi basin

The cryosphere constitutes an important subset of the hydrosphere.The Himalayan cryosphere is a significant contributor to the hydrological budget of a large river system such as the Ganges.Basic data on the cryosphere in the Himalaya is inadequate and also has large uncertainties.The data on glacial melt component in the Himalayan rivers of India also shows high variability.The Gangotri glacier which constitutes nearly a fifth of the glacierized area of the Bhagirathi basin represents one of the fastest receding,large valley glaciers in the region which has been surveyed and monitored for over sixty years.The availability of measurement over a long period and relatively small glacier-fed basin for the Bhagirathi river provides suitable constraints for the measurement of the glacial melt fraction in a Himalayan river.Pre- and post-monsoon samples reveal a decreasing trend Of depletion of δ~(18)O in the river water from glacier snout(Gaumukh) to the confluence of the Bhagirathi river with the Alaknanda river near Devprayag.Calculations of existing glacial melt fraction(~ 30%at Rishikesh) are not consistent with the reported glacial thinning rates.It is contended that the choice of unsuitable end-members in the three component mixing model causes the overestimation of glacial melt component in the river discharge.Careful selection of end members provides results(~11%at Devprayag) that are consistent with the expected thinning rates.     

Analysis of landslide causes and associated damages in the Kashmir Himalayas of Pakistan

This article deals with the analysis of landslide causes and associated damages in the Kashmir Himalayas of Pakistan. The present study is based on Muzaffarabad, which lies in the lesser Himalayas. Geologically, the Kashmir Himalaya is the young and most dynamic system in the world. In Muzaffarabad, mostly, people live on the fragile mountain slopes, and therefore, they are highly vulnerable to the risk of landslides. To achieve the objectives of the study, data were collected both from primary and secondary sources. Primary data were obtained through intensive field work and human perception survey, while secondary data were obtained from the related line agencies. The analysis reveals that in the study area, immature geology, active seismic zone, wide range of temperature and seasonal rain are the major physical factors, whereas human interventions on the fragile slopes are intensifying factors which in effect contribute to the landslide incidence. As a result, the adverse impacts on housing, sources of livelihood earnings and human casualties are escalating day-by-day. There are several implementing agencies which are responsible for reducing the risk of landsliding. So far, these agencies have not reduced the landslide damages rather their intensity and frequency have been increased especially after 2005 Kashmir earthquake.     

Incorporation of chitosan and glass substrate for improvement in adsorption,separation, and stability of TiO<Subscript>2</Subscript> photodegradation

It is demonstrated that single titanium dioxide (TiO₂) has high potential for photodegradation of pollutants. However, it is still far from becoming an effective photocatalyst system, due to issues of adsorption process, separation, as well as dissolution. Therefore, this study highlights the high adsorption capacity, simplified separation, and the promising stability of TiO_2(SY) (synthesized via sol–gel method) photocatalyst, fabricated using chitosan–TiO_2(SY) and supported by glass substrate (Cs–TiO_2(SY)/glass substrate) photocatalysts. Chitosan (Cs), with abundant –R–NH and NH₂ groups, promotes the adsorption sites of methyl orange (MO) and OH groups for major attachment to TiO_2(SY). Meanwhile, the glass substrate increases stability and assists separation of the photocatalysts. Initially, nano-TiO_2(SY) has been characterized using high-resolution transmission electron microscope. Cs–TiO_2(SY)/glass substrate was fabricated via dip-coating. The distribution and interface between the photocatalytic components were characterized by Fourier transform infrared absorption spectroscopy, UV–Vis diffuse reflectance spectroscopy, field emission scanning electron microscopy, and energy-dispersive spectrometer. UV–Vis analysis of the multilayer photocatalyst (2, 4, 6, and 8 layers) was further carried out by the adsorption–photodegradation, with MO as model of pollutant. Seventy percent of the total removal of MO via optimized eight layers of photocatalyst was achieved within 1 h of UV irradiation. The adsorption photocatalyst achieved 50 % with no exposure to UV light for 15 min of irradiation. It is concluded that suitable photocatalytic conditions and sample parameters possessing the multilayer photocatalyst of Cs–TiO_2(SY) are beneficial toward the adsorption–photodegradation process in wastewater treatment.     

Simultaneous topology and sizing optimization of viscous dampers in seismic retrofitting of 3D irregular frame structures

A new methodology for performance‐based optimal seismic retrofitting using a limited number of size groups of viscous dampers is presented. The damping coefficient of each size group of dampers is taken as a continuous variable and is determined by the optimization algorithm. Furthermore, for each potential location, a damper of a single size group is optimally assigned, if any. Hence, the formulation presents a large step forward towards practical optimal design of dampers. The key for achieving an efficient optimization scheme is the incorporation of material interpolation techniques that were successfully applied in other structural optimization problems of discrete nature. This results in a very effective optimization methodology that is expected to be very efficient for large‐scale structures. The proposed approach is demonstrated on several example problems of 3D irregular frame structures. Copyright © 2014 John Wiley & Sons, Ltd.     

Experimental and Numerical Studies of Velocity and Turbulence Intensities for Mid-Channel Bar

Water Resources - Turbulent phenomenon in braided rivers is much more complex compared to the straight and meandering rivers. The turbulent flow structure at locations upstream and downstream of...