Geologic hazards along part of Al-sayl–Alkabeir Al-Jammum road in Saudi Arabia

 The geological hazards along part of Al-Sayl Alkabeir Al-Jammum road, western Saudi Arabia, were studied by the use of the sterographic projection to define the types of possible failures and the magnitude of safety factor on each slope face. The studied area consists of granite and granodiorite rocks that were cut by acidic and basic dikes. There are four sets of structural discontinuities which, besides a few strike slip faults, constitute the planes of weakness that lead to a variety of possible mode failures. The stability analysis indicates that sections of the road are unstable as their cut slopes exceed the maximum safe slope angles which range between 65° and 73°. Received: 16 June 1998 · Accepted: 2 March 1999     

Effect of inertia nonlinearity on dynamic response of an asymmetric building equipped with tuned mass dampers

This study investigates the effect of nonlinear inertia on the dynamic response of an asymmetric building equipped with Tuned Mass Dampers (TMDs). In the field of structural engineering, many researchers have developed models to study the behavior of nonlinear TMDs, but the effect of nonlinear inertia has not received as much attention for asymmetric buildings. To consider nonlinear inertia, the equations of motion are derived in a local rotary coordinates system. The displacements and rotations of the modeled building and TMDs are defined by five-degree-of-freedom (5-DOFs). The equations of motion are derived by using the Lagrangian method. Also in the proposed nonlinear model, the equations of motion are different from a conventional linear model. In order to compare the response of the proposed nonlinear model and a conventional linear model, numerical examples are presented and the response of the modeled buildings are derived under harmonic and earthquake excitations. It is shown that if the nonlinear inertia is considered, the response of the modeled structures changes and the conventional linear approach cannot adequately model the dynamic behavior of the asymmetric buildings which are equipped with TMDs.     

Seasonal Short‐Term Prediction of Dissolved Oxygen in Rivers via Nature‐Inspired Algorithms

This study challenges the use of three nature‐inspired algorithms as learning frameworks of the adaptive‐neuro‐fuzzy inference system (ANFIS) machine learning model for short‐term modeling of dissolved oxygen (DO) concentrations. Particle swarm optimization (PSO), butterfly optimization algorithm (BOA), and biogeography‐based optimization (BBO) are employed for developing predictive ANFIS models using seasonal 15 min data collected from the Rock Creek River in Washington, DC. Four independent variables are used as model inputs including water temperature (T), river discharge (Q), specific conductance (SC), and pH. The Mallow's Cp and R² parameters are used for choosing the best input parameters for the models. The models are assessed by several statistics such as the coefficient of determination (R²), root‐mean‐square error (RMSE), Nash–Sutcliffe efficiency, mean absolute error, and the percent bias. The results indicate that the performance of all‐nature‐inspired algorithms is close to each other. However, based on the calculated RMSE, they enhance the accuracy of standard ANFIS in the spring, summer, fall, and winter around 13.79%, 15.94%, 6.25%, and 12.74%, respectively. Overall, the ANFIS‐PSO and ANFIS‐BOA provide slightly better results than the other ANFIS models.     

A practical approach for seismic risk assessment of underground structures: A case study of Iranian subway tunnels

Active geological and young faulted zones have made Iran’s territory one of the most seismological active areas in the world according to recent historical earthquakes. Some of the deadliest earthquakes such as Gilan 1990 and Kermanshah 2018 caused tens of thousands fatalities. If such violent earthquakes affect strategical structures of a country, indirect losses would be more concerning than direct losses. Nowadays there is no doubt about the vital role of tunnels and underground structures in urban areas. These facilities serve as nonstop functional structures for human transportation, water and sewage systems and underground pedestrian ways. Any external hazard subjected to underground spaces, such as earthquake could directly affect passenger’s lives and significantly decrease whole system reliability of public transportation. Commonly two earthquake levels of intensities, Maximum Design Earthquake (MDE) and Operating Design Earthquake (ODE) were used in seismic design of underground structures. However, uncertain nature of earthquakes in terms of frequency content, duration of strong ground motion, and level of intensity indicate that only the two levels of earthquake (ODE and MDE) cannot cover the all range of possible seismic responses of structures during a probable earthquake. It is important to evaluate the behavior of tunnel under a wide range of earthquake intensities. For this purpose, a practical risk-based approach which is obtained using the total probability rule was used. This study illustrates a framework for evaluation seismic stability of tunnels. Urban railway tunnels of Tehran, Shiraz, Ahwaz, Mashhad, Isfahan and Tabriz were considered as study cases. Nominal value of seismic risk for three main damage states, including minor, moderate and major were calculated.     

Evaluation of the effects of uncertainty on the predictions of landslide occurrences using the Shannon entropy theory and Dempster–Shafer theory

Natural Hazards - One of the requirements for planning and decision-making to develop the infrastructures is to prepare the landslide occurrence hazard map. For this purpose, in this article, the...     

Simulation of debris flow on an instrumented test slope using an updated Lagrangian continuum particle method

We present an updated Lagrangian continuum particle method based on smoothed particle hydrodynamics (SPH) for simulating debris flow on an instrumented test slope. The site is a deforested area near the village of Ruedlingen, a community in the canton of Schaffhausen in Switzerland. Artificial rainfall experiments were conducted on the slope that led to failure of the sediment in the form of a debris flow. We develop a 3D mechanistic model for this test slope and conduct numerical simulations of the flow kinematics using an SPH formulation that captures large deformation, material nonlinearity, and the complex post-failure movement of the sediment. Two main simulations explore the impact of changes in the mechanical properties of the sediment on the ensuing kinematics of the flow. The first simulation models the sediment as a granular homogeneous material, while the second simulation models the sediment as a heterogeneous material with spatially varying cohesion. The variable cohesion is meant to represent the effects of root reinforcement from vegetation. By comparing the numerical solutions with the observed failure surfaces and final free-surface geometries of the debris deposit, as well as with the observed flow velocity, flow duration, and hot spots of strain concentration, we provide insights into the accuracy and robustness of the SPH framework for modeling debris flows.

     

A simple displacement model for response analysis of EPS geofoam seismic buffers

A simple displacement-type block model is proposed to compute the compression–load–time response of an idealized seismic buffer placed against a rigid wall and used to attenuate earthquake-induced dynamic loads. The seismic buffer is modelled as a linear elastic material and the soil wedge shear surface by a stress-dependent linear spring. The model is shown to capture the trends observed in four physical reduced-scale model shaking table tests carried out with similar boundary conditions up to a base excitation level of about 0.7g. In most cases, quantitative predictions are in reasonable agreement with physical test results. The model is simple and provides a possible framework for the development of advanced models that can accommodate more complex constitutive laws for the component materials and a wider range of problem geometry.     

On analysis and prediction of tides on the west coast of Great Britain

Summary. Long-period tidal records from eight ports on the west coast of Great Britain are analysed, using both the harmonic method and the response function. Time series up to 9.5 yr were used so that fine structure of certain regions of high energy in the tidal residual spectrum may be examined. This also assisted in accurate separation of tides from surges. According to the currently accepted formulation of M₁, its composition is not compatible with its actual composition in the real tide and, as such, has no useful purpose to serve in computation of predictions. Constituents Sa, Ssa, MA, and MB, are adversly affected by weather and long records are essential for their accurate separation. It has been observed that annual perturbations of S₂, similar to those confirmed in recent years for M₂, also exist but these are not readily recognisable because their speeds are the same as those of constituents T₂ and R₂. These perturbations, being highly sensitive to meteorological forces, are mainly responsible for cusps or humps in the vicinity of major tidal constituents in tidal residual spectra. The relationship of radiational and gravitational tides is found to be in very good agreement with theoretical results. In summer months non-predictable variance reduces to about half of the annual variance, reflecting the regional weather conditions of summer and winter.     

Comparative probabilistic assessment of the hydrological performance of reconstructed and natural watersheds

The oil sands industry has committed to returning the mine sites to a productive condition. The reconstructed soil covers must have sufficient available water holding capacity (AWHC) to supply enough moisture over the growing season, to promote vegetation. In order to assess the sustainability of various soil cover alternatives, a generic, system dynamic watershed model entitled GSDW was used along with the available historical meteorological records to estimate the maximum soil moisture deficit and annual evapotranspiration fluxes. A probabilistic framework was adopted; consequently, frequency curves of the maximum annual moisture deficit values are constructed and used to assess the probability that various reconstructed and natural watersheds can provide the associated moisture demands. In general, the study showed a tendency for the reconstructed watershed to provide less moisture for evapotranspiration than natural systems. Watersheds of various soil types, layering, thicknesses and topography were studied. The gained knowledge was used to predict the possible performance of a hypothetical reclamation cover. The results indicated that the hypothetical cover performed in a similar manner to the thickest existing soil cover which confirmed a high probability of that cover to survive under the same existing climatic conditions. Moreover, this probabilistic framework was found to be useful for integrating information gained from natural watersheds (e.g. the canopy of mature natural systems and transfer the results to the reconstructed system). The results show that the canopy influenced the moisture deficit regime positively which signifies a greater possibility that reconstructed covers will adapt to vegetation type. In brief, the adopted approach enables better understanding of the response of reconstructed systems via multiple simulations of ‘what‐if’ scenarios using different soil/vegetation alternatives. Copyright © 2010 John Wiley & Sons, Ltd.