Chlorophyll modulation of mixed layer thermodynamics in a mixed-layer isopycnal General Circulation Model — An example from Arabian Sea and equatorial Pacific

Western tropical Indian Ocean, Arabian Sea, and the equatorial Pacific are known as regions of intense bio-chemical-physical interactions: the Arabian Sea has the largest phytoplankton bloom with seasonal signal, while the equatorial Pacific bloom is perennial with quasi-permanent upwelling. Here, we studied three dimensional ocean thermodynamics comparing recent ocean observation with ocean general circulation model (OPYC) experiment combined with remotely sensed chlorophyll pigment concentrations from the Coastal Zone Color Scanner (CZCS). Using solar radiation parameterization representing observations that a higher abundance of chlorophyll increases absorption of solar irradiance and heating rate in the upper ocean, we showed that the mixed layer thickness decreases more than they would be under clear water conditions. These changes in the model mixed layer were consistent with Joint Global Ocean Flux Study (JGOFS) observations during the 1994-1995 Arabian Sea experiment and epi-fluorescence microscopy (EFM) on samples collected during Equatorial Pacific Ocean Climate Study (EPOCS) in November, 1988. In the Arabian Sea, as the chlorophyll concentrations peak in October (3 mg/m³) after the summer plankton bloom induced by coastal upwelling, the chlorophyll induced biological heating enhanced the sea surface temperature (SST) by as much as 0.6‡C and sub-layer temperature decreases and sub-layer thickness increases. In the equatorial Pacific, modest concentrations of chlorophyll less than 0.3 mg/m³ is enough to introduce a meridional differential heating, which results in reducing the equatorial mixed layer thickness to more than 20 m. The anomalous meridional tilting of the mixed layer bottom enhances off equatorial westward geostrophic currents. Consequently, the equatorial undercurrent transports more water from west to east. We proposed that these numerical model experiments with use of satellite andin situ ocean observations are consistent under three dimensional ocean circulation theory combined with solar radiation transfer process.     

Transfer of Taiwanese ideas and technology to The Gambia, West Africa: a viable approach to rural development?

The development of Taiwan's agricultural sector contributed significantly to the country's transformation from virtual poverty after World War II to a modern industrial nation. Success resulted from the use of appropriate technologies, developed through an exceptionally close working relationship between government, research and development institutions, extension services and farmers in Taiwan. As part of their overseas development aid programme, the Republic of China on Taiwan has established Technical Missions in those developing countries where it receives political recognition. Among these is The Gambia, West Africa, where one focus of Taiwan's current Technical Mission is the development of women's market gardens. Although the gardens have proved successful, there is doubt as to whether their achievements will be sustained once Taiwan's Technical Mission in The Gambia has ended. Field research in Taiwan and in The Gambia, based largely on participatory techniques, has revealed that the low-tech methods introduced from Taiwan are appropriate for the Gambian environment. However, much depends on whether women participating in the schemes can commit sufficient time and energy to the gardens, as at present this is a limiting factor. The potential of the gardens may also be constrained by a lack of appropriate institutional infrastructure, particularly the scope for profitable disposal of garden produce. A major conclusion of the article is that successful transfer of appropriate technology to The Gambia is likely to be impeded by poorly developed coordination between groups that proved to be key 'players' in the development of agriculture in Taiwan: government, research and development institutions, extension services and producers.     

Eclipse of radio emission on 7 March, 1970 at 10 cm wavelength from the active region associated with McMath plage 10 618

Radio emission of 10 cm from the whole disk was monitored during the eclipse of 7 March, 1970 by the Aerospace San Fernando Observatory and AFCRL Sagamore Hill Solar Radio Observatory. For both, the active region associated with sunspot 17 774, McMath region 10 618, was occulted. At Sagamore Hill the entire region was occulted. At SFO only the southern half of the sunspot group and the hydrogen plage southeast of the group was occulted. This region produced an importance class 1N flare and 10 cm burst beginning at 1601 UT and was enhanced about 15 flux units above the mean value of 190 units at onset.The Sagamore Hill data indicate the region was about 3.8 and contributed about 0.21 of the total radiation from the disk. The SFO data gave about 5.4 for the size of the southern half of the region and showed that about 0.20 of the total radiation came from there. Radiation came primarily from the hydrogen plage southeast of the major spot of the group. The hydrogen plage northwest of the group did not contribute significantly. Although the small flare occurred in this region, it did not contribute more than 0.04 of the total (0.20 of the active region) at occultation of region 10 618.     

Monitoring of salt affected soils — A case study using aerial photographs,salyut‐7 space photographs,and landsat TM data

Soils of part of Ukai‐kakarapar Command area, Gujarat (India) have been mapped at 1:25, 000 scale using aerial photographs of December 1977. It was observed that about 36.3% of the area was affected by soil salinity/alkalinity. The test area has been remapped using Salyut‐7 space photographs taken during Indo‐Soviet joint flight in April, 1984. The area affected by soil salinity/alkalinity was found to be substantially higher (80.3%). The earlier mapping using aerial photographs was done when the soil surface was compartively moist (December 1977) as compared to date of Salyut‐7 photography (April 1984), when the soil surface was likely to be devoid of moisture and the salts moved to the surface. To have easy comparision with the map prepared by using aerial photographs, Landsat TM data of December, 1985 was used in which 45.7% of the total area was mapped as salt affected. The extent of area delineated using Landsat TM was higher than that of 1977 but much lesser than the area delineated using Salyut‐7 (MKF‐6M) photographs. This indicated that the increase in the extent of salt affected area in the map prepared using the MKF‐6M photographs might be partly due to actual increase in the salinity/alkalinity and partly due to the seasonal affects. Among the various bands of MKF‐6M, band ‐4 was found to be the best for delineating the salt affected soils. The boundaries were sharper in the FCC and band No.4 of MKF‐6M than in the aerial photographs.     

Methods for medium-term prediction of the net sediment transport by waves and currents in complex coastal regions

Medium-term prediction of sediment transport and morphological behaviour in the coastal zone is becoming increasingly important as a result of human interference and changing environmental conditions. The interaction of waves and tides is shown to play a pivotal role in the net (annual) sediment transport and morphodynamics of the coastal zone. The Telemac Modelling System has been applied to the Dyfi Estuary and neighbouring coastline, mid Wales, to recreate the annual wave–current conditions and the resulting sediment fluxes. ‘Input reduction’ methods have been required to produce realistic schematisations of events in practical computation times. A field campaign carried out in 2006 provided data for validation of the flow module (Telemac-2D) and also observations to verify the patterns predicted by the wave module (Tomawac). To improve model accuracy refinements were implemented with regard to the sand transport formulation used in the sand transport module (Sisyphe). Here, a parameterisation of the results from the UWB 1DV sand transport ‘research’ model, for the conditions in the Dyfi Estuary, has been introduced, allowing Sisyphe to provide greater realism in the morphological predictions. The model predictions are presented along with a discussion of the success/failure and limitations of the modelling methods applied.     

A comparison of solute-transport solution techniques and their effect on sensitivity analysis and inverse modeling results

Five common numerical techniques for solving the advection-dispersion equation (finite difference, predictor corrector, total variation diminishing, method of characteristics, and modified method of characteristics) were tested using simulations of a controlled conservative tracer-test experiment through a heterogeneous, two-dimensional sand tank. The experimental facility was constructed using discrete, randomly distributed, homogeneous blocks of five sand types. This experimental model provides an opportunity to compare the solution techniques: the heterogeneous hydraulic-conductivity distribution of known structure can be accurately represented by a numerical model, and detailed measurements can be compared with simulated concentrations and total flow through the tank. The present work uses this opportunity to investigate how three common types of results--simulated breakthrough curves, sensitivity analysis, and calibrated parameter values--change in this heterogeneous situation given the different methods of simulating solute transport. The breakthrough curves show that simulated peak concentrations, even at very fine grid spacings, varied between the techniques because of different amounts of numerical dispersion. Sensitivity-analysis results revealed: (1) a high correlation between hydraulic conductivity and porosity given the concentration and flow observations used, so that both could not be estimated; and (2) that the breakthrough curve data did not provide enough information to estimate individual values of dispersivity for the five sands. This study demonstrates that the choice of assigned dispersivity and the amount of numerical dispersion present in the solution technique influence estimated hydraulic conductivity values to a surprising degree.     

Thermische Energieflüsse an der Wasseroberfläche: Beispiel Sempachersee

Data collected every 20 minutes for 18 months by a meteorological buoy moored on Lake Sempach in Switzerland (maximum depth 86 m, surface area 14.1 km²) are used to calculate different processes contributing to the net heat flux between water and atmosphere. The processes considered are shortwave and longwave radiation, evaporation/condensation and sensible heat transfer. The temporal resolution of the measurements allows the evaluation of the processes occurring on three different time scales: diurnal variations, weather events of a few days and yearly cycles. The heat content of the lake is calculated from quasi-continuous measurements of water temperature at different depths. The yearly amplitude of the heat content is 1100·10⁶ J/m². Short-time variations of the heat flux determined from water temperature analysis agree well with the flux variations modeled using meteorological data. However, the latter generally underestimates the measured net heat flux in the long term. Wind measurements, together with the net heat flux, are used to calculate the Flux Richardson Number and the Monin-Obukov Length. Examples are given to show the predominant influence of the wind on the stratification of the upper water column and thus on the surface water temperature.      

Intercomparison of210Pb measurements at GEOSECS station 500 in the northeast Pacific

During reoccupation of the GEOSECS-I test station in May, 1979, more than eighty 30-liter Niskin samples were collected in profile, many as replicates, for²¹⁰Pb intercomparison measurements by the WHOI, SIO and Yale groups. In addition to the inter-laboratory comparisons, the SIO group also carried out extensive experiments to test the effect of sample scavenging method. Pb equilibration time (storage effect), and filtration process on the measured²¹⁰Pb results.The intercomparison measurements indicate that there is a general agreement between the various sets of data. The sample set which allows a direct comparison at the same depth was available in most cases only between two of the three groups. The direct paired comparison shows that (1) the WHOI data are systematically 3% lower than the SIO data; (2) there are no systematic differences observed between the SIO and Yale data although the scatter is rather large; (3) the Yale data are systematically higher than the WHOI data by about 8%.The SIO experiments show that (1) the two scavenging methods employed (Fe(OH)₃ and Co-APDC co-precipitation) yield identical²¹⁰Pb results; (2) variation of Pb carrier equilibration time or of storage time has no discernible effect; (3) the filtration apparatus and procedure employed at this station do not result in²¹⁰Pb loss or contamination.The²¹⁰Pb profile structure and absolute concentration measured earlier at the same location (GOGO-II test station and GEOSECS station 347) agree with those of station 500 within 10%. The present profile shows a minimum²¹⁰Pb concentration around 500 m depth, marking the penetration depth of the flux of excess²¹⁰Pb from the atmosphere. There is a mild mid-depth maximum around 2500–3000 m. The²¹⁰Pb/²²⁶Ra activity ratio decreases monotonically from about 1 at the²¹⁰Pb minimum to about 0.5 near the bottom. The particulate²¹⁰Pb profile shows a systematic increase from the subsurface water to the bottom water by a factor of 5. This feature has been observed in many GEOSECS particulate²¹⁰Pb profiles.     

Use of traveltime skips in refraction analysis to delineate velocity inversion1

First arrival refraction data does not normally provide any indication of the velocity inversion problem. However, under certain favourable circumstances, when the low-velocity layer (LVL) is considerably thicker than the overlying higher-velocity layer (HVL), the velocity inversion can be seen in the form of a traveltime skip. Model Studies show that in such cases the length of the HVL traveltime branch can be used to determine the thickness of the HVL and the magnitude of the traveltime skip in order to determine the thickness of the LVL. This is also applicable in the case of field data.