Some considerations concerning seismic geomorphology and paleoseismology

Seismic geomorphology studies landforms which developed in connection with earthquakes. Among them, two different end members may be distinguished: 1) seismo-tectonic landforms, including surface faults and fractures, land uplift and subsidence at different scales, surface bulges, elongate ridges, and any other permanent ground deformations directly related to tectonic stress, and 2) seismo-gravitational landforms, such as landslides, deep-seated gravitational slope deformations, sinkholes, and fissures due to sediment compaction or liquefaction and sand blows, connected with both seismic shaking and gravitational stress.A clear-cut distinction between the two categories of landforms is not always easy to make (and in many instances not really useful), while there are, in many cases, ground effects that might be (and should be) considered as simultaneous combinations of seismo-tectonic and seismo-gravitational processes. This applies especially to surface fracturing and faulting which could be the combined result of tectonic stress, stress produced by seismic shaking, and gravitational stress.The objective of this paper is to review selected case histories mainly from Italy and the Mediterranean region, in order to show the importance of a comprehensive study of earthquake-generated landforms for understanding the seismicity level of the area under investigation. We argue that in earthquake prone areas, seismic landforms often constitute typical patterns (seismic landscapes) whose recognition, mapping and paleoseismological analysis may help in the evaluation of seismic hazards.     

Fe and O isotope composition of meteorite fusion crusts: Possible natural analogues to chondrule formation?

Meteorite fusion crust formation is a brief event in a high‐temperature (2000–12,000 K) and high‐pressure (2–5 MPa) regime. We studied fusion crusts and bulk samples of 10 ordinary chondrite falls and 10 ordinary chondrite finds. The fusion crusts show a typical layering and most contain vesicles. All fusion crusts are enriched in heavy Fe isotopes, with δ⁵⁶Fe values up to +0.35‰ relative to the solar system mean. On average, the δ⁵⁶Fe of fusion crusts from finds is +0.23‰, which is 0.08‰ higher than the average from falls (+0.15‰). Higher δ⁵⁶Fe in fusion crusts of finds correlate with bulk chondrite enrichments in mobile elements such as Ba and Sr. The δ⁵⁶Fe signature of meteorite fusion crusts was produced by two processes (1) evaporation during atmospheric entry and (2) terrestrial weathering. Fusion crusts have either the same or higher δ¹⁸O (0.9–1.5‰) than their host chondrites, and the same is true for Δ¹⁷O. The differences in bulk chondrite and fusion crust oxygen isotope composition are explained by exchange of oxygen between the molten surface of the meteorites with the atmosphere and weathering. Meteorite fusion crust formation is qualitatively similar to conditions of chondrule formation. Therefore, fusion crusts may, at least to some extent, serve as a natural analogue to chondrule formation processes. Meteorite fusion crust and chondrules exhibit a similar extent of Fe isotope fractionation, supporting the idea that the Fe isotope signature of chondrules was established in a high‐pressure environment that prevented large isotope fractionations. The exchange of O between a chondrule melt and an ¹⁶O‐poor nebula as the cause for the observed nonmass dependent O isotope compositions in chondrules is supported by the same process, although to a much lower extent, in meteorite fusion crusts.     

Observation of temporal and spatial variations in the Fe/O charge composition of the solar particle event of 4 July, 1974

Comprehensive measurements of the temporal variations of the Z 6 charge composition in the 4 July 1974 solar event made with experiments aboard IMP-7 and 8 show that large variations in the charge composition occur in three-hour-averaged intensities. Hourly averaged fluxes show variations as large as factors of 3 to 4 from one hour to the next and 3 hour averages show nearly a factor of 10 peak to minimum over the event. The precision of the measurements are limited by counting statistics of the Fe-group channel. Iron to oxygen variations are established by both rate channel and pulse height analysis techniques. Comparison of measurements from IMP-7 and 8, separated by about 70 R _E shows that, while significant differences in composition and intensity exist for brief periods, the gross compositional variations are reproduced well at both spacecraft. These observations provide particularly stringent conditions for theories of the acceleration, release, and propagation of solar energetic particles.     

High‐grade metamorphism and partial melting in Archean composite grey gneiss complexes

Much of the exposed Archean crust is composed of composite gneiss which includes a large proportion of intermediate to tonalitic material. These gneiss terranes were typically metamorphosed to amphibolite to granulite facies conditions, with evidence for substantial partial melting at higher grade. Recently published activity–composition (a?x) models for partial melting of metabasic to intermediate compositions allows calculation of the stable metamorphic minerals, melt production and melt composition in such rocks for the first time. Calculated P?T pseudosections are presented for six bulk rock compositions taken from the literature, comprising two metabasic compositions, two intermediate/dioritic compositions and two tonalitic compositions. This range of bulk compositions captures much of the diversity of rock types found in Archean banded gneiss terranes, enabling us to present an overview of metamorphism and partial melting in such terranes. If such rocks are fluid saturated at the solidus, they first begin to melt in the upper amphibolite facies. However, at such conditions, very little (< 5%) melt is produced and this melt is granitic in composition for all rocks. The production of greater proportions of melt requires temperatures ～800–850 °C and is associated with the first appearance of orthopyroxene at pressures below 8–9 kbar or with the appearance and growth of garnet at higher pressures. The temperature at which orthopyroxene appears varies little with composition providing a robust estimate of the amphibolite–granulite facies boundary. Across this boundary, melt production is coincident with the breakdown of hornblende and/or biotite. Melts produced at granulite facies range from tonalite–trondhjemite–granodiorite for the metabasic protoliths, granodiorite to granite for the intermediate protoliths and granite for the tonalitic protoliths. Under fluid‐absent conditions the melt fertility of the different protoliths is largely controlled by the relative proportions of hornblende and quartz at high grade, with the intermediate compositions being the most fertile. The least fertile rocks are the most leucocratic tonalites due to their relatively small proportions of hydrous mafic phases such as hornblende or biotite. In the metabasic rocks, melt production becomes limited by the complete consumption of quartz to higher temperatures. The use of phase equilibrium forward‐modelling provides a thermodynamic framework for understanding melt production, melt loss and intracrustal differentiation during the Archean.     

Constraints from Moho geometry and crustal thickness on the geodynamic origin of the Vrancea Seismogenic Zone (Romania)

Reprocessing of industry deep seismic reflection data (Ramnicu Sarat and Braila profiles) from the SE Carpathian foreland of Romania provides important new constraints on geodynamic models for the origin of the intermediate depth Vrancea Seismogenic Zone (VSZ). Mantle (70–200 km) earthquakes of the VSZ are characterized by high magnitudes (greater than 6.5), frequent occurrence rates (approximately 25 years), and confinement in a very narrow (30 × 70 × 200 km³) near vertical zone atypical for a Wadati–Benioff plane, located in front of the orogen. These two deep (20 s) seismic reflection profiles (70 km length across the foreland) reveal (1) a high-amplitude, gently east-dipping reflection across most of the section from what we interpret to be the Moho at  15 s (40–42 km) on the Ramnicu Sarat line to  16 s (47–48 km) on the Braila line, (2) a thick sedimentary cover increasing in thickness from east (1 s;  800 m) to west (7.5 s; 14 km), (3) an eastward increase in crustal thickness from 38 km (near VSZ) to  45 km, (4) seismic and topographic evidence for a newly imaged, possibly seismically active basement fault with a surface offset of 30 m observed on the Ramnicu Sarat line, (5) a lack of notable west-dipping structures in the crust and across the Moho, and (6) variable displacements on Peceneaga–Camena Fault of  5 km at Moho and  200 m at the basement–sedimentary cover contact.These observations appear to argue against recent models for west-dipping subduction of oceanic lithosphere at or in the vicinity of the Vrancea Seismogenic Zone given the lack of west-dipping fabrics in the lower crust and across the crust–mantle boundary. Consequently, one possible explanation for the geodynamic origin of VSZ could be partial delamination of the continental lithosphere in an intra-plate setting along a sub-horizontal lithospheric interface in the Carpathian hinterland that likely involves remnant lithospheric coupling between the crust and uppermost mantle in the foreland.     

Pollution records from sediments of three lakes in New York State

Sediment core segments from Sylvan Lake, Lake Champlain and Lake Canadarago were dated radiometrically with ²¹⁰Pb and ¹³⁷Cs. Their respective sedimentation rates were determined to be 0.11, 0.14 and 0.52 g cm^?2 yr^?1. For the two lakes of lower sedimentation the variations of selected elemental abundances as function of depth were analyzed. Two groupings were found: Al, K, Ti, Rb and Zr were correlated among themselves but reflected different variations in the input of terrigenous erosion material to the lakes. The Cu, Zn and Pb correlated among themselves showed similar depth dependence with increasing concentrations toward the top which can be attributed to cultural pollution. Recent ‘excess’ fluxes to the sediments above the natural contribution by clastic material were derived for the location of the cores, which for Cu, Zn and Pb amounted to 3.8, 24 and 16 μg cm^?2 yr^?1 respectively for Sylvan Lake and 4.9, 20 and 16 μg cm^?2 yr^?1 for Lake Champlain. The corresponding ²¹⁰Pb flux was 3.3 and 2.3 dpm cm^?2 yr^?1, respectively for the two lakes.Approximate residence times in the water column were obtained for trace metals at the Lake Champlain location. Short residence times estimated for Pb (< 0.15 yr) and Cu (< 0.4 yr) indicate fast removal, whereas those for Zn (1.0 ± 0.3 yr) and Cr (2.0 ± 0.5 yr) appeared to be dominated by the water residence time.     

Field compaction control studies on road bases in a new settlement area in Ghana

Summary Among the major causes for failure of roads in the tropics is inadequate compaction during construction. There is, therefore, the need to strictly control the compaction of the pavement layers if the design life of the road is to be attained; thereby eliminating large maintenance costs.This note reports on pavement compaction control studies undertaken on the road bases of service roads in a new settlement area in Ghana. These roads were to be provided with bituminous surfacing immediately after compaction. Studies concerning particle breakdown during field compaction by two contractors executing the works under the same conditions have been made, together with an assessment of contractor efficiency.It was found that the placement moisture contents varied greatly from the optimum. One contractor was compacting the gravels on the dry side of optimum, consequently achieving relatively high densities. The other contractor was compacting on the wet side and achieving lower density levels. This was still the case even after initial test sections were found to have been undercompacted.Compaction levels achieved in the crowns were generally found to be higher than those at the shoulders of the road test sections. The breakdown of coarse particles due to compaction was quite significant. There is therefore the need for highway material engineers to ensure that in addition to meeting the grading requirements, road base materials must adequately meet the requirements on weathering and mechanical strength properties.     

Contribution of chromospheric features to UV irradiance variability from spatially-resolved Ca II K spectroheliograms

We have digitized the Ca ii K spectroheliograms, observed at the National Solar Observatory at Sacramento Peak, for the period 1980 (maximum of solar cycle 21), 1985 (minimum of solar cycle 21), 1987 (beginning of the ascending phase of solar cycle 22), 1988 and 1989 (ascending phase and maximum of solar cycle 22), and 1992 (declining phase of solar cycle 22). A new method for analyzing the K spectroheliograms has been developed and applied to the K images for the time interval of 1992. Using histograms of intensity, we have segregated and measured the cumulative intensity and area of various chromospheric features like the plages, magnetic network and intranetwork elements. Also, the full width at half maximum (FWHM) derived from the histograms has been introduced as a new index for describing the chromospheric activity in the K-line. The full-disk intensity (spatial K index) has been derived from spatially-resolved K images and compared to the spectral K index derived from the line profiles for the full disk. Both the spatial K index and FWHM have been compared to the UV irradiance measured in the Mg ii h and k lines by the NOAA9 satellite and found that they are highly correlated with the Mg ii h and k c/w ratio.NRC Resident Research Associate, on leave from Indian Institute of Astrophysics, Bangalore 560034, India.