The study of metal contamination in urban topsoils of Mexico City using GIS

This research presents and discusses information concerning the spatial distribution of heavy metals (Pb, Cu, Zn, Ba, Co, Cr, Ni and V) in the urban environments of Mexico City using geographical information system and statistical analysis. Superficial soil samples (n = 146) were analyzed. The highest contamination indices were found in the north and center zone of the metropolitan area. In contrast, the surrounding rural fields show a lower impact grade. The higher concentrations of Pb, Cu, Zn and Ba were observed as being related to high vehicular traffic, nevertheless other elements such as Co, Cr, Ni and V do not show anthropogenic influence and their content can be attributed to the parental rock. The results are compared with previous surveys carried out in 2003 in order to evaluate temporal deposition trends. No changes were found on reported concentrations except for Cu and Zn, whose concentration has increased in later years. The results suggest that spatial distribution analysis and results in comparison with previous studies could be useful for the management and sustainable development of the metropolitan area of Mexico City.     

Hydrogeology and sustainable future groundwater abstraction from the Agua Verde aquifer in the Atacama Desert,northern Chile

The hyper-arid conditions prevailing in Agua Verde aquifer in northern Chile make this system the most important water source for nearby towns and mining industries. Due to the growing demand for water in this region, recharge is investigated along with the impact of intense pumping activity in this aquifer. A conceptual model of the hydrogeological system is developed and implemented into a two-dimensional groundwater-flow numerical model. To assess the impact of climate change and groundwater extraction, several scenarios are simulated considering variations in both aquifer recharge and withdrawals. The estimated average groundwater lateral recharge from Precordillera (pre-mountain range) is about 4,482 m³/day. The scenarios that consider an increase of water withdrawal show a non-sustainable groundwater consumption leading to an over-exploitation of the resource, because the outflows surpasses inflows, causing storage depletion. The greater the depletion, the larger the impact of recharge reduction caused by the considered future climate change. This result indicates that the combined effects of such factors may have a severe impact on groundwater availability as found in other groundwater-dependent regions located in arid environments. Furthermore, the scenarios that consider a reduction of the extraction flow rate show that it may be possible to partially alleviate the damage already caused to the aquifer by the continuous extractions since 1974, and it can partially counteract climate change impacts on future groundwater availability caused by a decrease in precipitation (and so in recharge), if the desalination plant in Taltal increases its capacity.     

Natural Arsenic Attenuation via Metal Arsenate Precipitation in Soils Contaminated with Metallurgical Wastes: I. Wet Chemical and Thermodynamic Evidences

Arsenic from natural and anthropogenic sources is a worldwide contaminant of aqueous environments, such as groundwater and soils. The present investigation was performed on Mexican soils contaminated with residues from metallurgical processes that have shown a natural As attenuation. Experimental aqueous arsenic extractions in these were successfully simulated for almost half of the soil samples using a database updated for all known metal arsenate formation constants, revealing the predominance of solubility-controlled As mobility via Pb, mixed Pb–Cu, and Ca arsenate solid formation. The relatively low total Fe/As ratios (2–13 w/w) present in the soils studied, together with the high and equivalent contents of As, Pb, and Cu in these, favor the precipitation process over As(V) adsorption to Fe oxides, despite a 2% average Fe content in the soils studied. Under these conditions bicarbonate was found to be a highly unsuitable extractant due to its indirect As release from the solid arsenates, via heavy metal carbonate precipitation processes.     

Evaluation of methods of spatial interpolation for monthly rainfall data over the state of Rio de Janeiro,Brazil

Five deterministic methods of spatial interpolation of monthly rainfall were compared over the state of Rio de Janeiro, southeast Brazil. The methods were the inverse distance weight (IDW), nearest neighbor (NRN), triangulation with linear interpolation (TLI), natural neighbor (NN), and spline tension (SPT). A set of 110 weather stations was used to test the methods. The selection of stations had two criteria: time series longer than 20 years and period of data from 1960 to 2009. The methods were evaluated using cross-validation, linear regression between values observed and interpolated, root mean square error (RMSE), coefficient of determination (r ²), coefficient of variation (CV, %), and the Willmott index of agreement (d). The results from different methods are influenced by the meteorological systems and their seasonality, as well as by the interaction with the topography. The methods presented higher precision (r ²) and accuracy (d, RMSE) during the summer and transition to autumn, in comparison with the winter or spring months. The SPT had the highest precision and accuracy in relation to other methods, in addition to having a good representation of the spatial patterns expected for rainfall over the complex terrain of the state and its high spatial variability.     

A Monte Carlo Model Of The Nocturnal Surface Temperatures In Urban Canyons

A model for the urban canyon is formulated for meteorologicalconditions of weak winds at night time. Thermal radiation, conductivity and convection are simulated by means of the Monte Carlo method. These are the main physical processesof energy transfer that give rise to the characteristic temperaturedistribution in these systems. The model has been satisfactory tested under ideal conditions for which analytical solutions exist.The predictions of the model under morerealistic conditions accurately reproduce the observationalresults. A strong temperature gradient across streets, with the canyon corners up to 4 °C warmer than the canyon centre, is found for the deepest canyons. This theoretical predictionhas been successfully verified with measurementstaken in a number of streets of the city of Granada in Spain.     

Changes in the onset and length of seasons from an ensemble of regional climate models over Spain for future climate conditions

This study analyses the length and onset of the four seasons based on the annual climatic cycle of maximum and minimum temperatures. Previous studies focused over climatically homogeneous mid-high latitude areas, employing fixed temperature thresholds (related to climatic features such as freezing point) that can be inadequate when different climate conditions are present. We propose a method related to the daily minimum and maximum temperature 25th and 75th point-dependent climatic percentiles. It is applied to an ensemble of regional climate models (RCMs) of 25-km horizontal resolution over the peninsular Spain and Balearic Islands, where a large variety of climatic regimes, from alpine to semi-desertic conditions, are present. First, baseline climate (1961–2000) ERA40-forced RCM simulations are successfully compared with the Spain02 daily observational database, following astronomical season length (around 90 days). This result confirms the validity of the proposed method and capability of the RCMs to describe the seasonal features. Future climate global climate model-forced RCMs (2071–2100) compared with present climate (1961–1990) simulations indicate the disappearance of winter season, a summer enlargement (onset and end) and a slight spring and autumn increase.     

Runoff and sediment yield from land under various uses in a Mediterranean mountain area: long‐term results from an experimental station

In this study we analyzed runoff and sediment yield from land under various traditional and current land uses in Mediterranean mountain areas, using long‐term data from an experimental station in the Aísa Valley, Central Spanish Pyrenees. Monitoring at this station has provided 20 years of data that can help explain the hydrological and geomorphological changes that have been observed at larger spatial scales, and also the changes that have occurred to some of the most characteristic landscapes of the Mediterranean middle mountains. In spite of the problems associated with the use of small experimental plots, the results obtained are consistent with other studies in the Mediterranean region, and confirm the strong influence of land use changes on runoff generation and sediment yield. The results indicate that: (i) cereal cultivation on steep slopes (both alternating cereal cultivation and fallow on sloping fields and shifting agriculture on the steepest slopes) represents a major problem for soil conservation. This explains the occurrence throughout the Mediterranean mountains of many degraded hillslopes, which show evidence of sheet wash erosion, rilling, gullying and shallow landsliding; (ii) farmland abandonment has led to a marked reduction in runoff and sediment yield as a consequence of rapid plant recolonization, particularly by dense shrubs; (iii) the natural transformation of abandoned fields into grazing meadows has reduced runoff and sediment yield. Land use trends in the Mediterranean mountains are mainly characterized by generalized farmland abandonment and a decrease in livestock pressure. From a hydrological and geomorphological point of view the main consequences have been a reduction in overland flow from the hillslopes, and a reduction in sediment sources, with differences up to one order of magnitude in sediment yield from dense shrub cover and grazing meadow areas compared with areas under shifting agriculture. Copyright © 2012 John Wiley & Sons, Ltd.     

Ecological quality assessment of small estuaries from the Portuguese coast based on benthic macroinvertebrate assemblages indices

Benthic macroinvertebrates communities are the most consistently emphasized biotic component of aquatic ecosystems and are one of the biological indicators required for assessment by the European Water Framework Directive. In this context, several indices based on these communities have been developed in order to assess ecological quality of estuarine systems. In the present work we used AMBI, M-AMBI, BENTIX and BAT to distinguish ecological status of five small estuarine systems of the Portuguese south and southwest coasts. Although indices outputs did not differ between systems and sampling seasons, results indicated that the metrics in which these indices are based could differentiate community structures as a result of two main gradients that force these communities: the natural variability, and the anthropogenic impact.     

Response of single benthic metrics and multi-metric methods to anthropogenic pressure gradients, in five distinct European coastal and transitional ecosystems

In recent times many benthic indices have been proposed to assess the ecological quality of marine waters worldwide. In this study we compared single metrics and multi-metric methods to assess coastal and transitional benthic status along human pressure gradients in five distinct environments across Europe: Varna bay and lake (Bulgaria), Lesina lagoon (Italy), Mondego estuary (Portugal), Basque coast (Spain) and Oslofjord (Norway). Hence, 13 single metrics (abundance, number of taxa, and several diversity and sensitivity indices) and eight of the most common indices used within the European Water Framework Directive (WFD) for benthic assessment were selected: index of size spectra (ISS), Benthic assessment tool (BAT), Norwegian quality index (NQI), Multivariate AMBI (M-AMBI), Benthic quality index (BQI), (Benthic ecosystem quality index (BEQI), Benthic index based on taxonomic sufficiency (BITS), and infaunal quality index (IQI). Within each system, sampling sites were ordered in an increasing pressure gradient according to a preliminary classification based on professional judgement. The different indices are largely consistent in their response to pressure gradient, except in some particular cases (i.e. BITS, in all cases, or ISS when a low number of individuals is present). Inconsistencies between indicator responses were most pronounced in transitional waters (i.e. IQI, BEQI), highlighting the difficulties of the generic application of indicators to all marine, estuarine and lagoonal environments. However, some of the single (i.e. ecological groups approach, diversity, richness) and multi-metric methods (i.e. BAT, M-AMBI, NQI) were able to detect such gradients both in transitional and coastal environments, being these multi-metric methods more consistent in the detection than single indices. This study highlights the importance of survey design and good reference conditions for some indicators. The agreement observed between different methodologies and their ability to detect quality trends across distinct environments constitutes a promising result for the implementation of the WFD’s monitoring plans. Moreover, these results have management implications, regarding the dangers of misclassification, uncertainty in the assessment, use of conflicting indices, and testing and validation of indices.     

Some Insights into Topographic,Elastic and Self-gravitation Interaction in Modelling Ground Deformation and Gravity Changes in Active Volcanic Areas

Surface displacements and gravity changes due to volcanic sources are influenced by medium properties. We investigate topographic, elastic and self-gravitation interaction in order to outline the major factors that are significant in data modelling. While elastic-gravitational models can provide a suitable approximation to problems of volcanic loading in areas where topographic relief is negligible, for prominent volcanoes the rough topography could affect deformation and gravity changes to a greater extent than self-gravitation. This fact requires the selection, depending on local relief, of a suitable model for use in the interpretation of surface precursors of volcanic activity. We use the three-dimensional Indirect Boundary Element Method to examine the effects of topography on deformation and gravity changes in models of magma chamber inflation/deflation. Topography has a significant effect on predicted surface deformation and gravity changes. Both the magnitude and pattern of the geodetic signals are significantly different compared to half-space solutions. Thus, failure to account for topographic effects in areas of prominent relief can bias the estimate of volcanic source parameters, since the magnitude and pattern of deformation and gravity changes depend on such effects.