Variations of tidally driven three-layer residual circulation in fjords

Residual, or tidally averaged, circulation in fjords is generally assumed to be density driven and two layered. This circulation consists of a thin surface layer of outflow and a thick bottom layer of sluggish inflow. However, development of different vertical structures in residual circulation in fjords can arise from wind, remote, and tidal forcing that may modify the two-layer circulation. Particularly, theoretical results of tidal residual flows in homogeneous semienclosed basins indicate that their vertical structure is determined by the dynamical depth of the system. This dynamical depth can be considered as the ratio between the water column depth and the depth of frictional influence in an oscillatory flow (inverse of Stokes number). When the frictional depth occupies the entire water column, the tidal residual flow is one layered as in shallow basins. But when the frictional depth is only a small portion of the water column (>6 times smaller), the tidal residual is three layered. In relatively deep fjords (say deeper than 100 m), where frictional depths typically occupy a small portion of the water column, the tidal residual flow is expected to be three layered. Ample observational evidence presented here shows a three-layered exchange flow structure in fjords. On the basis of observational and theoretical evidence, it is proposed that the water exchange structure in deep fjords (more than six frictional layers deep, or inverse Stokes number >6) is tidally driven and is three layered. The tidally driven three-layer structure of residual flows could be regarded in some cases as the fundamental structure. However, this structure will only be observed sporadically as it will be masked by wind forcing, remote forcing from the ocean, and freshwater pulses.     

Oxygen and carbon stable isotopes of modern land snail shells as environmental indicators from a low-latitude oceanic island

Land snails provide a unique opportunity to study terrestrial paleoenvironments because their shells, which are generally highly abundant and well-preserved in the fossil record, contain a temporal record of environmental change in the form of isotope codes. To evaluate the utility of this approach for a low-latitude oceanic setting, 207 modern shells of 18 species of land snail were analyzed for their oxygen and carbon isotope composition along a north and south facing altitudinal gradient (10-2160 m a.s.l.) in Tenerife Island (∼28°N) of the Canary Archipelago.Shells collected at each locality showed a relatively large range in isotope composition which was greater along the south facing transect (drier and hotter), suggesting that the variance in shell isotope values may be related to water-stress. Although pooled isotope values did not generally show strong relationships with environmental variables (i.e., altitude, temperature and precipitation), mean isotope values were strongly associated with some climatic factors when grouped by site. The mean δ¹⁸O value of the shell (δ¹⁸O_shell) by site displayed a negative correlation with elevation, which is consistent with the positive relationship observed between temperature and the δ¹⁸O value of rain (δ¹⁸O_rain). Calculated δ¹⁸O values of the snail body water (δ¹⁸O_body) derived from observed temperatures and δ¹⁸O_shell values (using the equation of Grossman and Ku [Grossman E. L. and Ku T. L. (1986) Oxygen and carbon isotope fractionation in biogenic aragonite. Chem. Geol. (Isotope Geosci. Sec.)59, 59-74]) displayed a trend with respect to altitude that was similar to measured and hypothetical δ¹⁸O values for local rain water. The calculated δ¹⁸O_body values from the shell declined 0.17‰ (VSMOW) per 100 m, which is consistent with the “altitude effect” observed for tropical rains in Western Africa, and it correlated negatively with rainfall amount. Accordingly, lower δ¹⁸O_shell values indicate lower temperatures, lower δ¹⁸O_rain values and possibly, higher rainfall totals. A positive correlation between the mean δ¹³C values of shells (δ¹³C_shell) and plants by site suggests that shells potentially record information about the surrounding vegetation. The δ¹³C_shell values varied between −15.7 and −0.6‰ (VPDB), indicating that snails consumed C₃ and C₄/CAM plants, where more negative δ¹³C_shell values probably reflects the preferential consumption of C₃ plants which are favored under wetter conditions. Individuals with more positive δ¹³C_shell values consumed a larger percentage of C₄ plants (other potential factors such as carbonate ingestion or atmospheric CO₂ contribution were unlikely) that were more common at lower elevations of the hotter and drier south facing transect. The relatively wide range of shell isotope values within a single site requires the analysis of numerous shells for meaningful paleoclimatic studies. Although small differences were observed in isotope composition among snail species collected at a single sampling site, they were not significant, suggesting that isotope signatures extracted from multi-taxa snail data sets may be used to infer environmental conditions over a broad range of habitats.     

Baseline of butyltin pollution in coastal sediments within the Basque Country (northern Spain), in 2007-2008

Tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT) were measured in surficial sediments at, the ports of Pasaia and Bilbao, together with other mid- and small-size harbours of the Basque Country (northern Spain), in 2007-2008. The highest values of the sum of the three measured butyltin species (3523-3640 ng g⁻¹, as Sn) were found at sampling stations near to shipyards located within the port of Pasaia. The highest value of TBT concentration (3143 ng g⁻¹, as Sn) was found at the marina of Getxo, in the port of Bilbao. The degree of TBT degradation varied greatly between sampling stations, being found to be generally higher in those sediments with higher values of redox potential and lower values of TBT concentration (normalized by organic matter content).     

Effects of excitation frequency on detection accuracy of orthogonal wavelet decomposition for structural health monitoring

Accurate estimation of stiffness loss is a challenging problem in structural health monitoring. In this study orthogonal wavelet decomposition is used for identifying the stiffness loss in a single degree of freedom spring-mass-damper system. The effects of excitation frequency on accuracy of damage detection is investigated. Results show that pseudo-alias effects caused by the orthogonal wavelet decomposition (OWD), affect damage detectability. It is demonstrated that theproposed approach is sunable for damage detection when the excitation frequency is relatively low. This study shows how a priori knowledge about the signal and ability to control the sampling frequency can enhance damage detectability.     

Velocity dispersion estimates of APM galaxy clusters

We present 83 new galaxy radial velocities in the field of 18 APM clusters with redshifts between 0.06 and 0.13. The clusters have Abell identifications and the galaxies were selected within 0.75  h ⁻¹ Mpc in projection from their centres. We derive new cluster velocity dispersions for 13 clusters using our data and published radial velocities.
We analyse correlations between cluster velocity dispersions and cluster richness counts as defined in Abell and APM catalogues. The correlations show a statistically significant trend although with a large scatter, suggesting that richness is a poor estimator of cluster mass irrespectively of cluster selection criteria and richness definition. We find systematically lower velocity dispersions in the sample of Abell clusters that do not fulfil APM cluster selection criteria, suggesting artificially higher Abell richness counts owing to contamination by projection effects in this subsample.     

Performance of two cumulus convection parameterizations for two heavy precipitation events in the Western Mediterranean

Summary A set of mesoscale numerical simulations using the Emanuel and Kain-Fritsch deep convection schemes has been performed in order to determine the sensitivity of the forecast-especially, the rainfall-to the scheme used. The study is carried out for two cases of heavy precipitation in the coastal zone of the Western Mediterranean, where the topographic forcing is of primary influence. The first one, characterized by an almost stationary synoptic situation, is dominated by warm, moist advection at low levels; the second one, of frontal type, presents a much stronger dynamic forcing at upper levels. Although the comparison attempt is conditioned by the limited number of considered cases, the numerical results provide at least some preliminary conclusions. The inclusion of a convective scheme improves the forecast precipitation, through two actions: directly, producing more realistic rainfall patterns in areas of convection; indirectly, avoiding excessive precipitation in areas with orographic or dynamical upward forcing by drying and stabilizing the atmosphere upstream. In particular, the Kain-Fritsch scheme seems to be more sensitive to the orographic forcing, in agreement with observations.With 21 Figures     

Lower Paleozoic extensional tectonics in the limit between the West Asturian-Leonese and Central Iberian Zones of the Variscan Fold-Belt in NW Spain

The limit between the West Asturian-Leonese and Central-Iberian Zones in the NW of the Iberian Peninsula is described in the area of Caurel-Truchas (Provinces of Orense and León). From the distribution of the sedimentary formations and the Variscan structures it is inferred that the transition between the two zones was a fault system, which was active during, at least, the Ordovician and Lower Silurian. The faults were supposedly normal, though they had probably some strike-slip component, and gave rise to a half-graben in which a syn-rift sequence was deposited. The latter underwent inversion at the onset of the Variscan tectonism, producing a ramp anticline-syncline pair that forms the more important folds in the area. The varying geometry of these folds is interpreted partly as being due to the existence of previous en échelon folds related to the strike-slip component of the faults and, partly, as a result of the variable intensity of the shear strain undergone during the first variscan phase.

---

Zusammenfassung Die Grenze zwischen der West-Asturischen-Leonesischen und Zentral-Iberischen Zone im NW der Iberischen Halbinsel wird aus dem Gebiet von Caurel-Truchas (Provinz Orense und León) beschrieben. Aufgrund der Verteilung der sedimentären Formationen, sowie der variszischen Strukturen wird abgeleitet, daß der Übergang zwischen den beiden Zonen durch ein Störungssystem bedingt wurde, das zumindest zwischen Ordovizium und Untersilur aktiv war. Dabei handelte es sich vermutlich um Abschiebungen mit einer Horizontalverschiebungskomponente. Diese Ausbildung führte zu einem Halbgraben mit darin abgelagerter sedimentärer Syn-Riftsequenz. Letztere wurde während der Anfangsphase der variszischen Tektonik invertiert, so daß es zu einem Rampen-Antiklinal-Synklinal Paar kam, welches die wichtigsten Falten der Gegend bildet. Die variable Geometrie der Falten wird zum einen der Existenz von frühen En-échelon Falten zugeschrieben, die durch die Horizontalverschiebungskomponente der Störungen hervorgerufen wurden; zum anderen sind sie das Resultat der veränderlichen Intensität der Scherspannung während der ersten variszischen Phase.

---

Resumen Se describe el límite entre las Zonas Asturoccidental-Leonesa y Centroibérica en el NO de la Península Ibérica en el área del Caurel-Truchas (Provincias de Orense y León). Partiendo de la distribución de las formaciones sedimentarias y de la geometría de las estructuras varíscicas, se deduce que la transición entre las dos zonas fue un sistema de fallas, que fue activo al menos durante el Ordovício y el Silúrico Inferior. Se supone que la principal componente de las fallas fue normal, aunque debió de existir también una componente de desgarre, y su juego originó un semi-graben en el que se acumuló una secuencia sin-rift. Esta última experimentó una inversión al principio de la tectogénesis Varíscica, formándose un par de pliegues de rampa que son los pliegues más importantes del área. La geometría variable de esos pliegues se interpreta como debida, en parte, a la existencia previa de pliegues en escalón relacionados con la componente de desgarre de las fallas y, en parte, como consecuencia de la variable intensidad de la deformación por cizallamiento sufrida durante la primera fase de deformación varíscica.

---

- - - Caurel-Truchas, Orense León. , , . , , . . , - . , - , , , , -, .

     

Diagnosis of mesoscale structures in cases of lee cyclogenesis during ALPEX

Summary Several cases of lee cyclogenesis that occurred during ALPEX-SOP have been analyzed, with the aim of separating the large scale structures from the subsynoptic/meso-a scale features that are characteristic of this meteorological phenomenon. The results presented here are mainly based on composites of the analyzed cases. We assume that the deformation caused by the orography can be, at least to a reasonable extent, isolated from the undisturbed state using scale separation. The analysis technique we employ provides the scale separation as built-in in the interpolation algorithm. The scale separation error due to the large inhomogeneities of the data density distribution is partly corrected using a method described in the text. The orographic disturbance appears in different mesoscale fields as a quasiantisymmetric dipolar structure. For example, high/low pressure, cold/warm temperature and anticyclonic/cyclonic couplets characterize the mesoscale fields near the Alps. A qualitative agreement is found with the structure of the orographically induced perturbations predicted by the normal mode theory of lee cyclogenesis.With 7 Figures