An alternative method for density variation modeling of the crust based on 3-D gravity inversion

In this paper we are proposing an alternative method for determination of density variations of the crust from constrained inversion of the terrestrial gravity data. The main features of the method can be summarized as follows: (i) Constructing a band-pass filter to remove the long and short wavelength signals from the terrestrial gravity data. (ii) Using an iterative method for stabilization and solution of the inverse problem. The mentioned regularization method is first validated by simulated gravity data and next the methodology is used for development of a new regional density variation model of the crust in three layers based on real gravity data in geographical area of Iran. Application of the band-pass filter to the latter data resulted the residual gravitation variations in the range of − 300 to 50 (mGal) which next based on the iterative method resulted following ranges for residual densities: −120 to 40 (kg/m³) in first layer, −40 to 40 (kg/m³) in second layer, and − 40 to 40 (kg/m³) in third layer.     

The Positive Effects of Nanoclay on the Hydraulic Conductivity of Compacted Kahrizak Clay Permeated With Landfill Leachate

This study evaluates the effect of nanoclay on permeability, swelling, compressive strength, and cation exchange capacity of a compacted Kahrizak landfill clay liner. The results show that 4% nanoclay significantly reduces permeability (3 × 10^?9 to 7.74 × 10^?11 cm/s in neutral, 3.66 × 10^?9 to 7.9 × 10^?10 cm/s in acidic, and 3.25 × 10^?9 to 5.24 × 10^?10 cm/s in alkaline condition), and increases compressive strength (by 36.28%) and the percentage of swelling (from 16.67 to 41.82, 23.33 to 45.45, and 15 to 38.18 at pH 7, 4.8, and 9, respectively) compare to raw clay samples. Moreover, the results of cation exchange capacity tests show that adding 4% nanoclay to the Kahrizak clay, permeated with landfill leachate, helps the sample maintain its mono‐valent ions between layers and remains dispersed. The results of SEM and XRD analyses show that by adding nanoclay, nanoclay clusters are formed in the sample; as a result, the interlayer spacing decreases which makes it remain dispersed. XRF analyses also demonstrate that by adding nanoclay to the mixture, the permeability and therefore, the amount of heavy metals which can penetrate into it decreases. The results justify the construction of clay barriers with nanoclay in order to prevent leachate penetration, and consequently reduce the operation costs.     

Improved vessel squat modeling for hydrographic and navigation applications using kinematic GNSS positioning

The squat phenomenon, that is, the sinkage of a vessel due to its motion can affect the safety of navigation and reduce the accuracy of hydrographic bathymetry. Therefore, it is necessary to model and predict the squat of vessels as a function of cruise speed. We present a Global Navigation Satellite Systems–based squat modeling method for both hydrographic and navigation applications. For implementation of the proposed method, onboard GPS antennae configurations are offered to model bow squat for full-form ships such as supertankers or ore–bulk–oil carriers as well as stern squat for fine-form vessels such as passenger liners or container ships. In the proposed methodology, the onboard GPS observations are used to determine cruise ground speed, heave, attitude, and controlling the quality of kinematic positioning via fixed baselines. The vessel squat is computed from ellipsoidal height differences of the onboard antennae with respect to a reference state, after removal of all disturbing effects due to roll, pitch, heave, tide, vessel load, and geoidal height variations. The final products of the proposed approach are the analytical squat models usable for hydrographic and navigation applications. As the case study, the method is applied to a survey vessel in the offshore waters of Kish harbor. Numerical results indicate that the experimental precision of the derived analytical squat models is in the range of 0.003–0.028 m. The computed navigation squat of the test vessel at a speed of 12.64 knots is 30 % of the vessel draft and about twice its hydrographic squat. Although the field test was performed on a survey vessel, the method can be applied to any ship at any waterway. The proposed method can address the inevitable demand of reliable squat models for delicate hydrographic projects and high-speed marine traffic.     

Link formation pattern during emergency response network dynamics

This study aims to understand the mechanisms of emergency response network evolution by quantitatively examining the link formation pattern among participants involved in a real emergency collaboration network. This is achieved by identifying the participants’ characteristics which can affect forming new links over time. The result indicates the existence of cumulative advantage process, where highly connected participants gain more new links over time. It also reveals the structural position of participants involved in a response network, i.e. brokering position, affects their number of future links. Understanding the link formation pattern is important for understanding the mechanisms of network evolution which help predict more precisely the behavior of actors and dynamics of network structure over time. This can assist researchers, decision makers and practitioners to manage and support the collaboration of actors in their systems in order to reach their organizational goals. The overall findings can contribute further to the development of network organizational theory in different contexts especially disaster and emergency response management.     

Predicting flow liquefaction,a constitutive model approach

In this paper, flow liquefaction criterion for contractive loose sands is analytically extracted based on the fundamental definition of flow liquefaction. In order to obtain the closed form of this criterion, Dafalias–Manzari constitutive model is employed; so the stress ratio at the onset of flow liquefaction is presented as a function of model parameters, state parameter and void ratio. Flow liquefaction line, as a graphical form of suggested criterion in stress space, shows that the peak points of undrained stress paths with same void ratios are not necessarily in a straight line. In order to validate the reliability of proposed flow liquefaction line to predict the onset of instability, it has been compared with the results of experimental tests performed on Toyoura, Ottawa and Leighton Buzzard sands. The verification results show that the present criterion can satisfactorily predict the onset of flow liquefaction in monotonic and cyclic undrained tests of saturated sands as well as the structural collapse in constant deviatoric stress tests of loose dry sands.     

Quantitative analysis of earthquake fatalities: case of Iran

Earthquakes in Iran are major and chronic disasters, but there is a seemingly downward trend in the number of lives lost from earthquake disasters in the past five decades. This paper particularly examines whether factors such as urbanization, literacy rate, wealth, and retrofitting measures have contributed to the declining trend of fatalities over past decades. Data records of 1960–2010 have been used to demonstrate the fatalities trend and a shorter series of 1990–2010 has been used to carry out a statistical analysis due to limited availability of information on retrofitting practices in the country. Regression models run in two stages. The first stage consists of normalized fatalities of Iran’s earthquakes, regressed on urbanization, wealth, and retrofitting. The second stage involves the measure of retrofit as the dependent variable regressed over urbanization and/or wealth as explanatory variables. The resulted regression models clearly explain the importance of retrofitting measure in saving lives in earthquakes disasters, as well as providing economic advantages and robust environment to the population. The study provides significant guidance for public policy. Undoubtedly, retrofitting, started in the country from 1990, has decreased the number of deaths; nonetheless, the measure is found to be mostly enforced in the cities and not in rural areas. Decision makers can use the results of this study to prioritize retrofit in rural areas, more than ever, and as much as possible.     

Numerical evaluation of liquefaction-induced damages in composite breakwaters and its application for performance-based improvement design

Breakwaters provide a calm sea basin for ships and protect harbor facilities by reflecting wave energy toward the open sea area. Their performance under environmental loadings is the main concern for coastal engineers. Liquefaction susceptibility of loose sediments of seabed threatens performance of these structures. The article investigates soil liquefaction effects on the seismic performance of Iran liquefied natural gas (LNG) composite breakwater. Performance-based design method, considering both grade of the breakwater and acceptable level of damages, was selected as design philosophy. Liquefaction-induced damages to the breakwater were determined by numerical analysis. Since the obtained level of deformations did not meet allowable damages, soil improvement against liquefaction was considered. Different improvement patterns were proposed based on distribution of pore pressure ratio (r_u) beneath the breakwater to control its seismic performance. This investigation revealed that the most important area for soil improvement is located near the toes of breakwater to control the slope instability and performance of the breakwater.     

Garnetization as a ground preparation process for copper mineralization: evidence from the Mazraeh skarn deposit, Iran

The Mazraeh Cu–Fe skarn deposit, NW Iran is the result of the intrusion of an Oligocene–Miocene granitic pluton into Cretaceous calcareous rocks. The pluton ranges in composition from monzonite to quartz monzonite, monzogranite, tonalite and granodiorite with I-type, calc-alkaline, and weakly peraluminous characteristics. The Mazraeh pluton was emplaced in a volcanic arc setting in an active continental margin at a depth of ~8 km. Pyroxene skarn, garnet skarn, and epidote skarn zones were formed during the intrusive phase. The garnet skarn developed as exoskarn and endoskarn from the calcareous wall rocks and the pluton, respectively, prior to mineralization. Garnet skarn from the exoskarn zone is identified by relict layering inherited from the precursor calcareous lithologies. Mass balance calculation of garnet skarn in the endoskarn zone indicates that hydrothermal fluids originating from the cooling magma introduced Si, Fe, Mn, Ca, Mg, P, Ag, Cu, Zn, La, Pb, Cd, Mo, and Y. The main mass loss in the garnet skarn was due to destruction of feldspars in the Mazraeh plutonic rocks and leaching of K₂O and Na₂O. Released Ca has been fixed in the andraditic garnet. Garnetization of the Mazraeh pluton was accompanied by mass and volume increase. The magnitude of these changes depends mainly on the degree of alteration and composition of the precursor. The brittle behavior of the endoskarn zone was increased due to formation of massive garnet which subsequently fractured. These fractures not only facilitated movement of hydrothermal fluids but also provided new locations for Cu mineralization. Therefore locating strongly garnetized zones may be a vector to ore in skarn deposits.