Assessing desertification by using soil indices

Desertification generally refers to land degradation in arid, semiarid, and dry semi-humid climatic zones. It involves five principal processes: vegetation degradation, water erosion, wind erosion, salinization and waterlogging, and soil crusting and compaction. The aim of this study is assessing desertification using soil criteria. For this purpose, nine indices including sodium absorption ratio (SAR), soil gypsum percentage, soil texture, the content of HCO₃ ^?, the percentage of the organic matter, electrical conductivity (EC), pH, the content of the soil sodium, and chloride were used. The soil samples were taken in the north of Zayandeh-Rood River in Isfahan province of Iran, using soil data randomly sampled in a depth of 0–20 cm. After assessing the normality of the samples using Kolmogorov-Smirnov test, indices were imported into GIS environment and interpolated with IDW and normal and discrete kriging methods for delineating soil characteristics maps based on MEDALUS model. In this model, the data were firstly changed from 100 to 200. Thus 100 and 200 are estimated as the best and worst quality, respectively. Then the final map of soil criteria has been created by geometric mean of its indicators. The results showed that the maximum area is related to the medium class of desertification and is equal to 44,746 ha. The areas of severe and very severe classes of desertification are equal to 30,949 and 351 ha, respectively. The results also revealed that the indices of the organic matter and soil gypsum percentage are the most influential indices which affect desertification phenomenon.     

EXPERIMENTAL AND FIELD STUDY ON MINING-PIT MIGRATION

1 INTRODUCTION Because of the large quantity of sand and gravel in their beds, rivers have always been considered as a major source of sand and gravel for civil works. Acceptable quality, ease of extraction and economy are some of the reasons could be mentioned. Unfortunately, specific laws and regulations regarding the safe in-stream mining have not been provided for users and officials. What should be taken into account are the effects of over-mining of sand and gravel, which can cause …     

Block removal and step backwearing as erosion processes on rock shore platforms: a preliminary case study of the chalk shore platforms of south‐east England

Shore platforms frequently exhibit steps or risers facing seaward, landwards or obliquely across‐shore. A combination of soft copy photogrammetry, ortho‐rectification, geo referencing and field measurement of step height are linked in a GIS environment to measure step retreat on chalk shore platforms at sample sites in the south of England over two periods, 1973–2001, 2001–2007. The methods used allow for the identification, delineation and measurement of historic change at high spatial resolution. The results suggest that while erosion of chalk shore platforms by step backwearing is highly variable, it appears to be of similar magnitude to surface downwearing of the same platforms measured by micro‐erosion meters (MEMs) and laser scanning, in a range equivalent to 0·0006 – 0·0050 m y^?1 of surface downwearing. This equates to annual chalk volume loss from the platforms, by the two erosion processes combined, of between 0·0012 m³ m^?2 and 0·0100 m³ m^?2. Results from the more recent years' data suggests that step retreat has variability in both space and time which does not relate solely to climatic variability. The results must be viewed with caution until much larger numbers of measurements have been made of both downwearing and step erosion at higher spatial and temporal resolution. Copyright © 2010 John Wiley & Sons, Ltd.     

Spatial analysis of water quality and its suitability in farming giant freshwater prawn (Macrobrachium rosenbergii) in Negeri Sembilan region,Peninsular Malaysia

Finding potential sites for resilient prawn production in the tropical environment that also prevents wastage of natural resources is not an easy task. The purpose of this study is to evaluate water quality suitability for prawn farming in Negeri Sembilan of Peninsular Malaysia based on Geographic Information System (GIS). To achieve this goal, numerous criteria including sources of water, water temperature, water pH, sources of pollution, salinity, soil texture and availability of phytoplankton criteria were considered for the modelling process. Analytic Hierarchy Process (AHP) technique was performed to standardize the criteria and the weighting process. The weighted overlay of indicators and results were accomplished by applying the Multi‐Criteria Decision Analysis (MCDA) method in GIS. It was indicated that the Negeri Sembilan area has potential for prawn farming. The results showed that about 25 per cent (163 056.93 ha) of the area was most suitable for prawn farming, about 58 per cent (384 656.88 ha) was considered moderately suitable, while 18 per cent (117 633.49 ha) was regarded as least suitable. The study concluded that the multi‐criteria decision analysis of water quality for prawn farming is vital for regional economic planning in the Negeri Sembilan area and also significant when establishing a model for aquaculture development.     

Application of remote sensing technology for Impact Assessment of Watershed Development Programme

The current study was taken up to investigate the utility of remote sensing and GIS tools for evaluation of Integrated Wasteland Development Programme (IWDP) implemented during 1997–2001 in Katangidda Nala watershed, Chincholi taluk, Gulbarga district, Karnataka. The study was carried out using IRS 1C, LISS III data of December 11, 1997 (pre-treatment) and November 15, 2002 (post-treatment) covering the watershed to assess the changes in land use / land cover and biomass that have changed over a period of five years (1997–2002). The images were classified into different land use/land cover categories using supervised classification by maximum likelihood algorithm. They were also classified into different biomass levels using Normalized Difference Vegetation Index (NDVI) approach. The results indicated that the area under agriculture crops and forest land were increased by 671 ha (5.7%) and 1,414 ha (11.94%) respectively. This is due to the fact that parts of wastelands and fallow lands were brought into cultivation. This increase in the area may be attributed to better utilization of surface and ground waters, adoption of soil and water conservation practices and changes in cropping pattern. The area under waste lands and fallow lands decreased by 1,667 ha (14.07%) and 467 ha (3.94%), respectively. The vegetation vigour of the area was classified into three classes using NDVI. Substantial increase in the area under high and low biomass levels was observed (502 ha and 19 ha respectively). The benefit-cost analysis indicates that the use of remote sensing and GIS was 2.2 times cheaper than the conventional methods. Thus, the repetitive coverage of the satellite data provides an excellent opportunity to monitor the land resources and evaluate the land cover changes through comparison of images for the watershed at different periods.     

Distribution of diagenetic alterations within depositional facies and sequence stratigraphic framework of fluvial sandstones: Evidence from the Petrohan Terrigenous Group,Lower Triassic,NW Bulgaria

Sequence stratigraphy of fluvial deposits is a controversial topic because changes in relative sea level will eventually have indirect impact on the spatial and temporal distribution of depositional facies. Changes in the relative sea level may influence the accommodation space in fluvial plains, and hence have impact on types of fluvial system, frequency of avulsion, and style of vertical and lateral accretion. This study aims to investigate whether depositional facies and changes in the fluvial system of the Lower Triassic Petrohan Terrigenous Group sandstones (NW Bulgaria) in response to changes in the relative sea level have an impact on the spatial and temporal distribution of diagenetic alterations.     

Multichannel analysis of surface waves (MASW) for seismic site characterization using 2D genetic algorithm at Bahrah area,Wadi Fatima,Saudi Arabia

The present study deals with the seismic site classification of Bahrah area, Wadi Fatima, to characterize the local site conditions. The dynamic behavior of sediments was studied by the application of surface wave inversion. The multichannel analysis of surface waves (MASW) shallow geophysical technique was utilized for site classification. MASW survey was carried out at 66 sites along with 13 seismic refraction profiles at suitable localities. MASW and seismic refraction profiles were processed and compared with the available borehole data. The integration of MASW techniques with seismic refraction and borehole data progressively enhanced the subsurface visualization and reliability of the shear wave velocity estimation in the subsurface in the study area. The subsurface shear-wave velocity model was achieved by the solution of an inverse problem-based dispersion of surface waves and propagation in a vertically heterogeneous medium. The 2D genetic algorithm was employed for the inversion of dispersion curves to obtain velocity and thickness of subsurface layers. The depth to engineering bedrock and velocity of shear waves in the first 30 m was deciphered and mapped. The depth of bedrock in study area varies from 4 to 30 m, and V _{S 30} ranges from 320 to 800 m/s. The most of study area falls in B and C class categories in addition to few sites of D class according to the NEHRP guidelines.     

Leachability of trace elements from two stabilized low lime Indian fly ashes

Fly ash is a waste by-product obtained from the burning of coal by thermal power plants for generating electricity. When bulk quantities are involved, in order to arrest the fugitive dust, it is stored wet rather than dry. Fly ash contains trace concentrations of heavy metals and other substances in sufficient quantities to be able to leach out over a period of time. In this study an attempt was made to study the leachabilities of a few selected trace metals: Cd, Cu, Cr, Mn, Pb and Zn from two different types of class F fly ashes. Emphasis is also laid on developing an alternative in order to arrest the relative leachabilities of heavy metals after amending them with suitable additives. A standard laboratory leaching test for combustion residues has been employed to study the leachabilities of these trace elements as a function of liquid to solid ratio and pH. The leachability tests were conducted on powdered fly ash samples before and after amending them suitably with the matrices lime and gypsum; they were compacted to their respective proctor densities and cured for periods of 28 and 180 days. A marked reduction in the relative leachabilities of the trace elements was observed to be present at the end of 28 days. These relative leachability values further reduced marginally when tests were performed at the end of 180 days.