Comparing mixing-length models of the diabatic wind profile over homogeneous terrain

Models of the diabatic wind profile over homogeneous terrain for the entire atmospheric boundary layer are developed using mixing-length theory and are compared to wind speed observations up to 300 m at the National Test Station for Wind Turbines at Høvsøre, Denmark. The measurements are performed within a wide range of atmospheric stability conditions, which allows a comparison of the models with the average wind profile computed in seven stability classes, showing a better agreement than compared to the traditional surface-layer wind profile. The wind profile is measured by combining cup anemometer and lidar observations, showing good agreement at the overlapping heights. The height of the boundary layer, a parameter required for the wind profile models, is estimated under neutral and stable conditions using surface-layer turbulence measurements, and under unstable conditions based on the aerosol backscatter profile from ceilometer observations.     

High hafnium members of the zircon-hafnon series from the granite pegmatites of Zambézia,Mozambique

A mineralogical nomenclature applicable to the natural binary isomorphous series ZrSiO₄-HfSiO₄ is proposed. It is suggested that (Hf, Zr)SiO₄ with more than 90 mol.-% hafnium component be called hafnon. Zoned crystals ranging in composition from hafnian zircon to hafnon were found in the heavy mineral concentrates from the tantalum pegmatites of the Morrua area, Conco, Moneia and Muiane mines in the district of Zambézia, Mozambique. The density (Berman balance), Hf/Zr ratio (XRF analysis) and unit-cell parameters (X-ray powder pattern) of the samples are determined and discussed. Two microprobe analyses of hafnon from Muiane are presented.     

Zur Stratigraphie des Altpaläozoikums in Argentinien

At the beginning of the Paleozoic era three geotectonic units were already constitued in the argentine territory: 1. central cratonic region; 2. ortogeosynclinal belt in the West, and 3. intracratonic region in the East. On the basis of the morphostructural units that emerge out of the development of the geotectonic pattern, the regional distribution and stratigraphy of the Lower Paleozoic rocks are described (Cambrian to Silurian). In the Northern Argentina (Subandine ranges, Eastern Cordillera and Puna) the stratigraphical sequence is complete with a thickness of 9.100 meters. In the Transpampean Ranges only the Ordovician (Tremadoc-Llanvirn) is represented with a minimum thickness of 3.850 meters. In the Precordillera of Western Argentina the sequence is complete with a minimum thickness of 6.000 meters, the Ordovician being the most developed. In the San Rafael ranges (Mendoza), the Northern and Southern ranges of the Buenos Aires province, the Northpatagonian nesocraton and the Chaco-Parana basin, the succession is incomplete or little known. In each case the recognized lithological units are described and their respective stratigraphical relations are indicated.     

U–Th–Pb and Rb–Sr systematics of Apollo 17 boulder 7 from the North Massif of the Taurus-Littrow Valley

Portions of highland breccia boulder 7 collected during the Apollo 17 mission were studied using UThPb and RbSr systematics. A RbSr internal isochron age of3.89 ± 0.08b.y. with an initial⁸⁷Sr/⁸⁶Sr of0.69926 ± 0.00008 was obtained for clast 1 (77135,57) (a troctolitic microbreccia). A troctolitic portion of microbreccia clast 77215,37 yielded a UPb internal isochron of3.8 ± 0.2b.y. and an initial²⁰⁶Pb/²⁰⁷Pb of 0.69. These internal isochron age are interpreted as reflecting metamorphic events, probably related to impacts, which reset RbSr and UPb mineral systems of older rocks.Six portions of boulder 7 were analyzed for U, Th, and Pb as whole rocks. Two chemical groups appear to be defined by the U, Th, and Pb concentration data. Chemical group A is characterized by U, Th, and Pb concentrations and²³⁸U/²⁰⁴Pb values which are higher than those of group B. Group A rocks have typical²³²Th/²³⁸U ratios of ～ 3.85, whereas-group B rocks have unusually high Th/U values of ～ 4.1.Whole-rock UPb and PbPb ages are nearly concordant. Two events appear to be reflected in these data — one at ～ 4.4 b.y. and one at ～ 4.5 b.y. The chemical groupings show no correlation with documented ages. The old ages of ～ 4.4 b.y. and ～ 4.5 b.y. may, like the younger ～ 4.0 b.y. ages, be related to basin excavation events.     

Geological and morphological study of the Jiufengershan landslide triggered by the Chi-Chi Taiwan earthquake

The Jiufengershan rock and soil avalanche is one of the largest landslides triggered by the Chi-Chi earthquake Taiwan 1999. The landslide destabilized the western limb of the Taanshan syncline along a weak stratigraphic layer. It involved a flatiron remnant, which was almost entirely mobilized during the earthquake. The avalanche was slowed down by NS trending ridges located downstream along the Jiutsaihu creek. The landslide affected a 60 m thick and 1.5 km long sedimentary pile composed of shales and sandstones, which dip 22°SE toward a transverse valley. The triggering mechanism and the sliding process were analyzed by means of geological and morphological data from aerial photographs and observed in the field. A high-resolution airborne Light Detection and Ranging (LiDAR) image taken 2.5 years after the landslide allows the identification of morphological structures along the sliding surface and the landslide accumulation. The sliding surface shows several deformation structures such as fault scarps and folds. These structures are interpreted in terms of basal shear stresses created during the avalanche. Three major joint sets were identified at the sliding surface. The isopach map of the landslide was calculated from the comparison between elevation models before and after the earthquake. The coseismic volume of mobilized material and landslide deposit data are 42 × 10⁶ m³ and 50 × 10⁶ m³, respectively. The geometry of the landslide accumulation in the field has an irregular star shape. The morphology of the deposit area shows a sequence of smooth reliefs and depressions that contrast with the neighboring ridges.     

Status of an endangered subspecies: the peninsular pronghorn at Baja California

During November 1993, we traversed by ground and by air the Vizcaíno Desert, the last redoubt of the peninsular pronghorn (Antilocapra americana peninsularis). A total of 29 h of aerial census was performed and a total of 1900 km²were covered by ground, totalling 400 man hours of survey. At present the peninsular pronghorn population consists of 175 individuals, and inhabits an area of approximately 5000 km². Because of the impossibility of controlling its activities over such an area and because of the present small population size, we propose to manage part of the population in semi-captivity at Mesa de la Choya island, with the objective of assuring the survival of this subspecies, the most endangered mammal in Mexico.     

Governing Metropolitan Lisbon: A tale of fragmented urban governance

This article is concerned with the nature of the present governance framework in the Lisbon metropolitan area and with the conditions responsible for the lack of any consistent intergovernmental and inter-tier co-ordination. It shows how Lisbon, where a form of metropolitan government was introduced only in 1991, is different from other European cities, but at the same time similar with regard to the limits associated with the associative or (polycentric) model adopted. The article concludes by discussing alternative scenarios for the reform of metropolitan government as well as the institutional and policy challenges facing the Lisbon metropolitan area. This revised version was published online in August 2006 with corrections to the Cover Date.     

Geostatistical seismic Amplitude‐versus‐angle inversion

Seismic inversion plays an important role in reservoir modelling and characterisation due to its potential for assessing the spatial distribution of the sub‐surface petro‐elastic properties. Seismic amplitude‐versus‐angle inversion methodologies allow to retrieve P‐wave and S‐wave velocities and density individually allowing a better characterisation of existing litho‐fluid facies. We present an iterative geostatistical seismic amplitude‐versus‐angle inversion algorithm that inverts pre‐stack seismic data, sorted by angle gather, directly for: density; P‐wave; and S‐wave velocity models. The proposed iterative geostatistical inverse procedure is based on the use of stochastic sequential simulation and co‐simulation algorithms as the perturbation technique of the model parametre space; and the use of a genetic algorithm as a global optimiser to make the simulated elastic models converge from iteration to iteration. All the elastic models simulated during the iterative procedure honour the marginal prior distributions of P‐wave velocity, S‐wave velocity and density estimated from the available well‐log data, and the corresponding joint distributions between density versus P‐wave velocity and P‐wave versus S‐wave velocity. We successfully tested and implemented the proposed inversion procedure on a pre‐stack synthetic dataset, built from a real reservoir, and on a real pre‐stack seismic dataset acquired over a deep‐water gas reservoir. In both cases the results show a good convergence between real and synthetic seismic and reliable high‐resolution elastic sub‐surface Earth models.