Lode–gold mineralization in the Tanami region, northern Australia

The Tanami region of northern Australia has emerged over the last two decades as the largest gold-producing region in the Northern Territory. Gold is hosted by epigenetic quartz veins in sedimentary and mafic rocks, and by sulfide-rich replacement zones within iron formation. Although limited, geochronological data suggest that most mineralization occurred at about 1,805–1,790 Ma, during a period of extensive granite intrusion, although structural relationships suggest that some deposits predate this period. There are three main goldfields in the Tanami region: the Dead Bullock Soak goldfield, which hosts the world-class Callie deposit; The Granites goldfield; and the Tanami goldfield. In the Dead Bullock Soak goldfield, deposits are hosted by carbonaceous siltstone and iron formation where a late (D₅) structural corridor intersects an early F₁ anticlinorium. In The Granites goldfield, deposits are hosted by highly sheared iron formation and are interpreted to predate D₅. The Tanami goldfield consists of a large number of small, mostly basalt-hosted deposits that probably formed at a high structural level during D₅. The D₅ structures that host most deposits formed in a convergent structural regime with σ ₁ oriented between E–W and ENE–WSW. Structures active during D₅ include NE-trending oblique thrust (dextral) faults and ESE-trending (sinistral) faults that curve into N- to NNW-trending reverse faults localized in supracrustal belts between and around granite complexes. Granite intrusions also locally perturbed the stress field, possibly localizing structures and deposits. Forward modeling and preliminary interpretations of reflection seismic data indicate that all faults extend into the mid-crust. In areas characterized by the N- to NW-trending faults, orebodies also tend to be N- to NW-trending, localized in dilational jogs or in fractured, competent rock units. In areas characterized by ESE-trending faults, the orebodies and veins tend to strike broadly east at an angle consistent with tensional fractures opened during E–W- to ENE–WSW-directed transpression. Many of these deposits are hosted by reactive rock units such as carbonaceous siltstone and iron formation. Ore deposition occurred at depths ranging from 1.5 to 11 km from generally low to moderate salinity carbonic fluids with temperatures from 200 to 430°C, similar to lode–gold fluids elsewhere in the world. These fluids are interpreted as the product of metamorphic dewatering caused by enhanced heat flow, although it is also possible that the fluids were derived from coeval granites. Lead isotope data suggest that lead in the ore fluids had multiple sources. Hydrogen and oxygen isotope data are consistent with both metamorphic and magmatic origins for ore fluids. Gold deposition is interpreted to be caused by fluid unmixing and sulfidation of host rocks. Fluid unmixing is caused by three different processes: (1) CO₂ unmixing caused by interaction of ore fluids with carbonaceous siltstone; (2) depressurization caused by pressure cycling in shear zones; and (3) boiling as ore fluids move to shallow levels. Deposits in the Tanami region may illustrate the continuum model of lode–gold deposition suggested by Groves (Mineralium Deposita 28:366–374, 1993) for Archean districts.     

A Non-Homogeneous Model for Kriging Dosimetric Data

Mathematical Geosciences - This paper deals with kriging-based interpolation of dosimetric data. Such data typically show some inhomogeneities that are difficult to take into account by means of...     

Ecophysiological differences between vesicomyid species and metabolic capabilities of their symbionts influence distribution patterns of the deep‐sea clams

This study provides an analysis of vesicomyid bivalve–symbiont community distribution across cold seep and hydrothermal vent areas in the Guaymas Basin (Gulf of California, Mexico). Using a combination of morphological and molecular approaches including fluorescent in situ hybridization (FISH), and electronic microscopy observations, vesicomyid clam species and their associated symbionts were characterized and results were analyzed in light of geochemical conditions and other on‐site observations. A greater diversity of vesicomyids was found at cold seep areas, where three different species were present (Phreagena soyoae [syn. kilmeri], Archivesica gigas, and Calyptogena pacifica). In contrast, A. gigas was the only species sampled across the hydrothermal vent area. The same haplotype of A. gigas was found in both hydrothermal vent and cold seep areas, highlighting possible contemporary exchanges among neighboring vents and seeps. In either ecosystem, molecular characterization of the symbionts confirmed the specificity between symbionts and hosts and supported the hypothesis of a predominantly vertical transmission. In addition, patterns of clams could reflect potential niche preferences for each species. The occurrence of numerous traces of vesicomyid movements on sediments in the sites colonized by A. gigas seemed to indicate that this species might have a better ability to move. Furthermore, variation in gill sulfur content could reveal a higher plasticity and sulfur storage capacity in A. gigas. Thus, the distribution of vesicomyid species across the chemosynthetic areas of the Guaymas Basin could be explained by differences in biological traits of the vesicomyid species that would allow A. gigas to more easily exploit transient and punctual sources of available sulfide than P. soyoae.     

THE CENTRAL PAMIR—AN ALPINE COLLISION ZONE

THE CENTRAL PAMIR—AN ALPINE COLLISION ZONE     

A reactive-transport model for weathering rind formation on basalt

Saprolite formation rates influence many important geological and environmental issues ranging from agricultural productivity to landscape evolution. Here we investigate the chemical and physical transformations that occur during weathering by studying small-scale “saprolites” in the form of weathering rinds, which form on rock in soil or saprolite and grow in thickness without physical disturbance with time. We compare detailed observations of weathered basalt clasts from a chronosequence of alluvial terraces in Costa Rica to diffusion-reaction simulations of rind formation using the fully coupled reactive transport model CrunchFlow. The four characteristic features of the weathered basalts which were specifically used as criteria for model comparisons include (1) the mineralogy of weathering products, (2) weathering rind thickness, (3) the coincidence of plagioclase and augite reaction fronts, and (4) the thickness of the zones of mineral reaction, i.e. reaction fronts. Four model scenarios were completed with varying levels of complexity and degrees of success in matching the observations. To fit the model to all four criteria, however, it was necessary to (1) treat diffusivity using a threshold in which it increased once porosity exceeded a critical value of 9%, and (2) treat mineral surface area as a fitting factor. This latter approach was presumably necessary because the mineral-water surface area of the connected (accessible) porosity in the Costa Rica samples is much less than the total porosity (Navarre-Sitchler et al., 2009). The model-fit surface area, here termed reacting surface area, was much smaller than the BET-measured surface area determined for powdered basaltic material. In the parent basalt, reacting surface area and diffusivity are low due to low pore connectivity, and early weathering is therefore transport controlled. However, as pore connectivity increases as a result of weathering, the reacting surface area and diffusivity also increase and weathering becomes controlled by mineral reaction kinetics. The transition point between transport and kinetic control appears to be related to a critical porosity (9%) at which pore connectivity is high enough to allow rapid transport. Based on these simulations, we argue that the rate of weathering front advance is controlled by the rate at which porosity is created in the weathering interface, and that this porosity increases because of mineral dissolution following a rate that is largely surface-reaction controlled.     

利用MODIS光学厚度遥感产品研究北京及周边地区的大气污染

对2001年在北京地区利用太阳光度计观测的气溶胶光学厚度和NASA发布的MODIS气溶胶产品进行了比较,验证了这一卫星遥感产品的可靠性;比较了2001年MODIS气溶胶光学厚度(AOD)产品和由空气污染指数(API)计算的每日平均可吸入颗粒物(PM10)浓度,得到了比较高的相关系数,证实该气溶胶产品可用于污染分析.将北京地区AOD与气象能见度观测资料进行比较,得到了不同季节的气溶胶"标高".利用统计的不同季节的气溶胶标高,从光学厚度的季节分布得到了能见度(能见距离)的季节分布.气溶胶光学厚度图像的个例分析表明,除局地排放外,周边区域(主要为西南和南向)的输送对北京市区的空气污染贡献份额较大.卫星遥感气溶胶可以比较直观地再现污染物的区域分布和输送,不仅为研究全球气候变化也为研究区域环境的空气质量提供了一种有效手段.     

帕米尔中部含刚玉变质杂岩

刚玉矿化位于穆兹科尔(Muzkol)变质杂岩体内.该杂岩体近纬向展布在帕米尔中部阿尔卑斯褶皱带的东部,属蓝晶石—夕线石型阿尔卑斯带变质杂岩.地质填图发现有4个变质岩区:低绿片岩相(白云母—绿泥石)区,高绿片岩相(黑云母—绿泥石)区,绿帘石—角闪岩相区,角闪岩相区,而刚玉矿化集中在绿帘石—角闪岩及周围角闪岩相变质体内的交代蚀变区.交代蚀变区内的刚玉矿化通常与层面或 大型同倾斜褶皱轴面平行.根据母岩成分可将含刚玉交代岩分为3类,分别位于方解石大理岩内、白云石大理岩内及片岩内.在大理岩内,刚玉成粉红色,与白云母、黑云母、方柱石、钙长石、正长石、金红石、电气石、磷灰石、黄铁矿及石墨共生,以Al含量变化大和Fe含量低为特点.在片岩内,刚玉成蓝色,与黑云母、绿泥石、电气石及磷灰石共生各种类型的含刚玉岩石均以K,Na,Mg的含量较高而Fe含量较低为特点.根据P—T—XCO2图估算含刚玉交代岩的稳定范围在610℃相似文献   

Estimation of crack opening from a two‐dimensional continuum‐based finite element computation

Damage models are capable of representing crack initiation and mimicking crack propagation within a continuum framework. Thus, in principle, they do not describe crack openings. In durability analyses of concrete structures however, transfer properties are a key issue controlled by crack propagation and crack opening. We extend here a one‐dimensional approach for estimating a crack opening from a continuum‐based finite element calculation to two‐dimensional cases. The technique operates in the case of mode I cracking described in a continuum setting by a nonlocal isotropic damage model. We used the global tracking method to compute the idealized crack location as a post‐treatment procedure. The original one‐dimensional problem devised in Dufour et al. [4] is recovered as profiles of deformation orthogonal to the idealized crack direction are computed. An estimate of the crack opening and an error indicator are computed by comparing finite element deformation profiles and theoretical profiles corresponding to a displacement discontinuity. Two estimates have been considered: In the strong approach, the maxima of the profiles are assumed to be equal; in the weak approach, the integrals of each profile are set equal. Two‐dimensional numerical calculations show that the weak estimates perform better than do the strong ones. Error indicators, defined as the distance between the numerical and theoretical profiles, are less than a few percentages. In the case of a three‐point bending, test results are in good agreement with experimental data, with an error lower than 10% for widely opened crack (> 40µm). Copyright © 2011 John Wiley & Sons, Ltd.     

Quality assessment from a hydrological perspective of a digital elevation model derived from WorldView-2 remote sensing data

Abstract

A digital elevation model (DEM) derived from a stereo pair of WorldView-2 (WV-2) images was assessed against ground-truth GPS point datasets. Two assessment methods were used: (a) vertical accuracy assessment and (b) hydrological assessment of surface runoff variables. Three agricultural plots with different topographic slopes were selected to perform a vertical accuracy assessment, followed by a comparative assessment of a set of hydrological variables. The results show an overall vertical accuracy of 0.45 m, confirming the potential of WV-2 stereo images to extract elevation information at high spatial resolution. Concerning plot-scale micro-topographic features, the WV-2 DEM performed better on the plot with rolling slopes (5–10%), extracting variables such as the total length and drainage area of flow paths with relative errors lower than 20%. However, some limitations were detected in the extraction of variables such as terrain slope, drainage points of flow paths and terrain depressions in areas of flatter slopes (<5%).

Editor Z.W. Kundzewicz; Associate editor D. Gerten