Multibeam sonar backscatter data processing

Multibeam sonar systems now routinely record seafloor backscatter data, which are processed into backscatter mosaics and angular responses, both of which can assist in identifying seafloor types and morphology. Those data products are obtained from the multibeam sonar raw data files through a sequence of data processing stages that follows a basic plan, but the implementation of which varies greatly between sonar systems and software. In this article, we provide a comprehensive review of this backscatter data processing chain, with a focus on the variability in the possible implementation of each processing stage. Our objective for undertaking this task is twofold: (1) to provide an overview of backscatter data processing for the consideration of the general user and (2) to provide suggestions to multibeam sonar manufacturers, software providers and the operators of these systems and software for eventually reducing the lack of control, uncertainty and variability associated with current data processing implementations and the resulting backscatter data products. One such suggestion is the adoption of a nomenclature for increasingly refined levels of processing, akin to the nomenclature adopted for satellite remote-sensing data deliverables.     

Effect of particle density and inflow concentration of suspended sediment on bedload transport in rill flow

Laboratory flume experiments were carried out to evaluate the effect of particle density on bedload transport of sand‐sized particles and the effect of a suspended load of clay particles (kaolinite) on bedload transport of sand‐sized particles in rill flow conditions. Three materials in the range 400–600 µm were selected to simulate bedload transport of primary particles and aggregates: sand (2650 kg/m³), crushed brick (2450 kg/m³) and anthracite (1300–1700 kg/m³). In the two first experiments, two different methods were applied to determine bedload transport capacity of coarse particles for various conditions of flow discharge (from 2 to 15 L/min) and slope (2.2, 3 and 4%). In the third experiment, clear water was replaced with kaolinite–water mixture and bedload transport capacity of crushed brick particles was determined for a 4% slope and different concentrations of kaolinite (0, 7, 41 and 84 g/L). The results showed that bedload transport increased significantly with the decrease in particle density but the effect of particle density on transport rates was much less important than flow discharge. Velocity measurements of clear flow, flow mixed with coarse particles and coarse particles confirmed the existence of a differentiation between suspended load and bedload. In these experimental conditions, suspended load of kaolinite did not affect bedload rates of crushed brick particles. Three transport capacity formulae were tested against observed bedload rates. A calibration of the Foster formula revealed that the shear stress exponent should be greater than 1.5. The Low and the Govers unit stream power (USP) equations were then evaluated. The Low equation was preferred for the prediction of bedload rates of primary particles but it was not recommended in the case of aggregates of low density because of the limited experimental conditions applied to derive this equation. Copyright © 2008 John Wiley & Sons, Ltd.     

Evidence of multiple evaporite recycling processes in a salt‐tectonic context,Sivas Basin,Turkey

The isotopic composition of evaporites can shed light on their environment of precipitation and their subsequent recycling processes. In this study, we performed Sr, O and S isotopic analyses on evaporitic sulphates in the halokinetic Sivas Basin. The main objectives were to decipher the age and origin of the evaporites responsible for the salt tectonics, and to test whether diapir dissolution acts as the source of younger evaporitic layers in continental mini‐basins. The Sr isotopes demonstrate that the first evaporites precipitated from seawater during the Middle–Late Eocene. The similar isotopic values measured in the halokinetic domain confirm that the Eocene evaporites triggered the salt tectonics and were continuously recycled in Oligo‐Miocene mini‐basins as lacustrine to sabkha evaporites. Modern halite precipitates suggest that the dissolution and recycling of diapiric halite is ongoing. This study demonstrates the efficiency of isotopic analyses in constraining evaporite recycling processes in continental halokinetic domains.     

Phytoliths as indicators of pedogenesis and paleoenvironmental changes in the Brazilian cerrado

This paper presents the preliminary results of phytolith analyses of a peat located in the cerrado of the Uberaba municipality, State of Minas Gerais, Brazil. The phytolith soil sequence is discussed by comparison with phytolith assemblages extracted from dominant plants (Cyperaceae and Poaceae). Increasing mean age of phytolith assemblages with depth is assumed. Poaceae Cuneiform bulliform cell, Parallelepiped bulliform cell and Elongate smooth long cell types dominate up to 80 cm, rapidly drop to 42% at 80 cm and regularly decrease from 42% to 2% upwards. Cyperaceae Rondel concave type shows the inverse trend, being dominant in the upper part of the profile. This pattern can be assigned to increasing selective dissolution of the Cyperaceae phytolith type with depth, or/and to a decrease of water stress suffered by the grasses, leading to a decrease of bulliform cell silicification. Soil processes and paleo-environmental changes hypotheses are discussed.     

Molecular and distribution data on the poorly known,elusive, cave mysid Harmelinella mariannae (Crustacea: Mysida)

Mediterranean underwater marine caves harbour abundant populations of several species of mysids that are increasingly used as biological models in ecological and evolutionary studies. One exception is the species Harmelinella mariannae, described in 1989 and then hardly ever again reported in the literature. We here provide the first data on the distribution of this poorly known taxon that, contrary to expectations for a rare brooding cave dweller, we now report from Madeira Island in the nearby Atlantic, to the easternmost parts of the Mediterranean. Brief behavioural observations are added, particularly its atypical solitary habits and its feeding behaviour as a high trophic level carnivore. Molecular characterization of the different specimens captured provided three sorts of information. Mitochondrial COI and 16S haplotypes suggest different colonization waves in the Mediterranean, with one group in the Eastern Basin, two in the Marseille region in the NW part of this sea, and another group with a very wide extension from Madeira to Liguria and Malta. Mitochondrial data also support that one of the groups in Marseille might have diverged as a cryptic species of Harmelinella. 18S rRNA gene displays a single common sequence to all specimens from the four groups, and seems to confirm the original proposed placement of this taxon within the subfamily Heteromysinae, not Leptomysinae.     

Limitations of the ferrozine method for quantitative assay of mineral systems for ferrous and total iron

The quantitative assay of clay minerals, soils, and sediments for Fe(II) and total Fe is fundamental to understanding biogeochemical cycles occurring therein. The commonly used ferrozine method was originally designed to assay extracted forms of Fe(II) from non-silicate aqueous systems. It is becoming, however, increasingly the method of choice to report the total reduced state of Fe in soils and sediments. Because Fe in soils and sediments commonly exists in the structural framework of silicates, extraction by HCl, as used in the ferrozine method, fails to dissolve all of the Fe. The phenanthroline (phen) method, on the other hand, was designed to assay silicate minerals for Fe(II) and total Fe and has been proven to be highly reliable. In the present study potential sources of error in the ferrozine method were evaluated by comparing its results to those obtained by the phen method. Both methods were used to analyze clay mineral and soil samples for Fe(II) and total Fe. Results revealed that the conventional ferrozine method under reports total Fe in samples containing Fe in silicates and gives erratic results for Fe(II). The sources of error in the ferrozine method are: (1) HCl fails to dissolve silicates and (2) if the analyte solution contains Fe³⁺, the analysis for Fe²⁺ will be photosensitive, and reported Fe(II) values will likely be greater than the actual amount in solution. Another difficulty with the ferrozine method is that it is tedious and much more labor intensive than the phen method. For these reasons, the phen method is preferred and recommended. Its procedure is simpler, takes less time, and avoids the errors found in the ferrozine method.     

An Eocene/Oligocene blueschist‐/greenschist facies P–T loop from the Cycladic Blueschist Unit on Naxos Island,Greece: Deformation‐related re‐equilibration vs. thermal relaxation

Geothermobarometric and geochronological work indicates a complete Eocene/early Oligocene blueschist/greenschist facies metamorphic cycle of the Cycladic Blueschist Unit on Naxos Island in the Aegean Sea region. Using the average pressure–temperature (P–T) method of thermocalc coupled with detailed textural work, we separate an early blueschist facies event at 576 ± 16 to 619 ± 32°C and 15.5 ± 0.5 to 16.3 ± 0.9 kbar from a subsequent greenschist facies overprint at 384 ± 30°C and 3.8 ± 1.1 kbar. Multi‐mineral Rb–Sr isochron dating yields crystallization ages for near peak‐pressure blueschist facies assemblages between 40.5 ± 1.0 and 38.3 ± 0.5 Ma. The greenschist facies overprint commonly did not result in complete resetting of age signatures. Maximum ages for the end of greenschist facies reworking, obtained from disequilibrium patterns, cluster near c. 32 Ma, with one sample showing rejuvenation at c. 27 Ma. We conclude that the high‐P rocks from south Naxos were exhumed to upper mid‐crustal levels in the late Eocene and early Oligocene at rates of 7.4 ± 4.6 km/Ma, completing a full blueschist‐/greenschist facies metamorphic cycle soon after subduction within c. 8 Ma. The greenschist facies overprint of the blueschist facies rocks from south Naxos resulted from rapid exhumation and associated deformation/fluid‐controlled metamorphic re‐equilibration, and is unrelated to the strong high‐T metamorphism associated with the Miocene formation of the Naxos migmatite dome. It follows that the Miocene thermal overprint had no impact on rock textures or Sr isotopic signatures, and that the rocks of south Naxos underwent three metamorphic events, one more than hitherto envisaged.     

Platiniferous gold–tourmaline aggregates in the gold–palladium belt of Minas Gerais,Brazil: implications for regional boron metasomatism

Mineralogy and Petrology - The platiniferous gold–palladium belt of Minas Gerais, Brazil, forms an approximately 240-km-long, roughly north–south-trending domain that includes numerous...     

Numerical simulation of percussive drilling

This paper presents a novel dynamical model to analyze the long‐term response of a percussive drilling system. This departs from existing approaches that usually consider a single activation and bit/rock interaction cycle for the analysis of the process performance. The proposed model integrates the axial dynamics of an elastic piston and an elastic drill bit, a motion‐dependent pressure law to drive the piston, and a generalized bit/rock interaction law representative of the dynamic indentation taking place at the bit/rock interface. It applies to down‐the‐hole percussive drilling as well as top‐hole, with minor modifications. The model does not account for the angular motion or the hole cleaning, however. The model is first formulated mathematically; then, a finite‐dimensional approximation is proposed for computations. Numerical analyses of the model response, for a low‐size down‐the‐hole percussive system, follow. The period‐1 stationary response for the reference configuration is studied in detail, and parametric analyses assessing the influence on the rate of penetration of the bit/rock interaction parameters, the feed force, and the percussive activation parameters are conducted. These analyses reveal that the multiscale nature of the process is well captured by the model and recover expected trends for the influence of the parameters. They also suggest that a significant increase of the penetration rate can be achieved by increasing the percussive frequency. Copyright © 2015 John Wiley & Sons, Ltd.