THz photometers for solar flare observations from space

The search for the still unrevealed spectral shape of the mysterious THz solar flare emissions is one of the current most challenging research issues. The concept, fabrication and performance of a double THz photometer system, named SOLAR-T, is presented. Its innovative optical setup allows observations of the full solar disk and the detection of small burst transients at the same time. The detecting system was constructed to observe solar flare THz emissions on board of stratospheric balloons. The system has been integrated to data acquisition and telemetry modules for this application. SOLAR-T uses two Golay cell detectors preceded by low-pass filters made of rough surface primary mirrors and membranes, 3 and 7 THz band-pass filters, and choppers. Its photometers can detect small solar bursts (tens of solar flux units) with sub second time resolution. Tests have been conducted to confirm the entire system performance, on ambient and low pressure and temperature conditions. An artificial Sun setup was developed to simulate performance on actual observations. The experiment is planned to be on board of two long-duration stratospheric balloon flights over Antarctica and Russia in 2014–2016.     

Molecular and distribution data on the poorly known,elusive, cave mysid Harmelinella mariannae (Crustacea: Mysida)

Mediterranean underwater marine caves harbour abundant populations of several species of mysids that are increasingly used as biological models in ecological and evolutionary studies. One exception is the species Harmelinella mariannae, described in 1989 and then hardly ever again reported in the literature. We here provide the first data on the distribution of this poorly known taxon that, contrary to expectations for a rare brooding cave dweller, we now report from Madeira Island in the nearby Atlantic, to the easternmost parts of the Mediterranean. Brief behavioural observations are added, particularly its atypical solitary habits and its feeding behaviour as a high trophic level carnivore. Molecular characterization of the different specimens captured provided three sorts of information. Mitochondrial COI and 16S haplotypes suggest different colonization waves in the Mediterranean, with one group in the Eastern Basin, two in the Marseille region in the NW part of this sea, and another group with a very wide extension from Madeira to Liguria and Malta. Mitochondrial data also support that one of the groups in Marseille might have diverged as a cryptic species of Harmelinella. 18S rRNA gene displays a single common sequence to all specimens from the four groups, and seems to confirm the original proposed placement of this taxon within the subfamily Heteromysinae, not Leptomysinae.     

Range imaging: a new method for high‐resolution topographic measurements in small‐ and medium‐scale field sites

Topographic measurements are essential for the study of earth surface processes. Three‐dimensional data have been conventionally obtained through terrestrial laser scanning or photogrammetric methods. However, particularly in steep and rough terrain, high‐resolution field measurements remain challenging and often require new creative approaches. In this paper, range imaging is evaluated as an alternative method for obtaining surface data in such complex environments. Range imaging is an emerging time‐of‐flight technology, using phase shift measurements on a multi‐pixel sensor to generate a distance image of a surface. Its suitability for field measurements has yet not been tested. We found ambient light and surface reflectivity to be the main factors affecting error in distance measurements. Low‐reflectivity surfaces and strong illumination contrasts under direct exposure to sunlight lead to noisy distance measurements. However, regardless of lighting conditions, the accuracy of range imaging was markedly improved by averaging multiple images of the same scene. For medium ambient lighting (shade) and a light‐coloured surface the measurement uncertainty was approximately 9 mm. To further test the suitability of range imaging for field applications we measured a reach of a steep mountain stream with a horizontal resolution of approximately 1 cm (in the focal plane of the camera), allowing for the interpolation of a digital elevation model on a 2 cm grid. Comparison with an elevation model obtained from terrestrial laser scanning for the same site revealed that both models show similar degrees of topographic detail. Despite limitations in measurement range and accuracy, particularly at bright ambient lighting, range imaging offers three‐dimensional data in real time and video mode without the need of post‐processing. Therefore, range imaging is a useful complement or alternative to existing methods for high‐resolution measurements in small‐ to medium‐scale field sites. Copyright © 2012 John Wiley & Sons, Ltd.     

Investigations on the runoff generation at the profile and plot scales,Swiss Emmental

This article describes an investigation on runoff generation at different scales in the forested catchment of the Sperbelgraben in the Emmental region (Swiss Prealps) where studies in the field of forest hydrology have a history of 100 years. It focuses on the analysis of soil profiles and the subsequent sprinkling experiments above them (1 m²), as well as on surface runoff measurements on larger plots (50 to 110 m²). In the Sperbelgraben investigation area, two very distinct runoff reactions could be observed. On the one hand, very high production of saturation overland flow was registered on wet areas of gleyic soils, with runoff coefficients between 0·39 and 0·94 for profile irrigation. On the other hand, almost no surface runoff was measured on Cambisols, with the exception at some sites of a hydrophobic reaction detected at the beginning of storms after dry periods (coefficients for profile irrigation: 0·01–0·16). This pattern was observed during 1 m² soil plot irrigation and on surface runoff plots. Apart from a less distinctive signal of the water‐repellent litter layer on the larger surface runoff plots, the dominant hydrological processes at the two scales are the same. The determined runoff reaction at the two scales corresponds well with information from a forest site type map describing soil and vegetation characteristics and used as a substitute for a soil map in this study. Theoretical considerations describing forest influence on flood discharge are discussed and evaluated to be in good agreement with observations. These findings are a sound foundation for application in hydrological catchment modelling. Copyright © 2006 John Wiley & Sons, Ltd.     

Geochemistry constraints of Mesozoic–Cenozoic calc-alkaline magmatism in the South Shetland arc, Antarctica

Geochemical data from basalts, basaltic andesites, and andesites of the Mesozoic–Cenozoic (143–44 Ma) from Livingston, Greenwich, Robert, King George, and Ardley Islands of the South Shetland archipelago, Antarctica, are presented. The rocks have variable SiO₂ of approximately 46–61 wt%, Al₂O₃ of 15–26 wt%, and total alkali (K₂O+Na₂O) of 2–6 wt%. Most samples have low Mg#, Cr, and Ni, which indicates that they have undergone significant fractional crystallization from mantle-derived melts. The presence of olivine cumulatic in the samples from Livingston and Robert Islands explains some high MgO, Ni, and Cr values, whereas low Rb, Zr, and Nb values could be related to undifferentiated magmas. N-MORB-normalized trace element patterns show that South Shetland Islands volcanic rocks have a geochemical pattern similar to that found for other island arcs, with enrichment in LILE relative to HFSE and in LREE relative to HREE. The geochemistry pattern and presence of calcic plagioclase, orthopyroxene, Mg-olivine, and titanomagnetite phenocrysts suggest a source related to the subduction process. The geochemical data also suggest magma evolution from the tholeiitic to the calc-alkaline series; some samples show a transitional pattern. Samples from the South Shetland archipelago show moderate LREE/HREE ratios relative to N-MORB and OIB, depletion in Nb relative to Yb, and high Th/Yb ratios. These patterns probably reflect magma derived from a lithospheric mantle source previously modified by fluids and sediments from a subduction zone.

Resumo

Dados geoquímicos de basaltos, andesitos basálticos e andesitos mesozóicos–cenozóicos (143–44 Ma) das ilhas Livingston, Greenwich, Robert, King George e Ardley do Arquipélago Shetland do Sul, Antártica são discutidas neste artigo. As rochas tem conteúdos de SiO₂ variando de 46 a 61%, Al₂O₃ de 15 a 26% e álcalis (K₂O+Na₂O) de 2 a 6%. A maior parte das amostras tem conteúdos baixos de Mg#, Cr e Ni, indicando que sofreram significante cristalização fracionada de fusões derivadas do manto. A presença de fases cumuláticas nas amostras das ilhas Livingston e Robert explicaria os elevados valores de MgO, Ni, Cr, enquanto que baixos valores de Rb, Zr e Nb observados nas amostras destas ilhas poderiam estar relacionados a magmas não diferenciados. Os padrões de elementos-traço normalizados pelo N-MORB mostram que as rochas vulcânicas das Ilhas Shetland do Sul têm padrão geoquímico similar àqueles encontrados em outros arcos de ilhas com enriquecimento em LILE em relação aos HFSE e em ETRL em relação aos ETRP. O padrão geoquímico e a ocorrência de fenocristais de plagioclásio cálcico, ortopiroxênio, olivina magnesiana e titanomagnetita sugerem origem relacionada a processos de subducção. Dados geoquímicos obtidos para as amostras do arquipélago Shetland do Sul sugerem um magma evoluindo de toleítico para cálcico-alcalino, observando-se em algumas amostras um padrão transicional. As amostras do arquipélago Shetland do Sul mostram em relação ao N-MORB e OIB, moderadas razões ETRL/ETRP, empobrecimento em Nb relativo a Yb e elevada razão Th/Yb Estes padrões refletem, provavelmente, magma derivado de uma fonte mantélica litosférica, que foi modificada por fluídos e sedimentos da zona de subducção.     

Mathematical models for control of resource-distribution used in drilling

System analysis can provide an efficient control of the distribution of an oil company's drilling resources. The technique presented here (using cable as an example) is applied to the construction and synthesis of a material- and technical- resources control system, and to the mathematical modeling of the man-computer interface.