Towards a microzonation of the Greater Beirut area: an instrumental approach combining earthquake and ambient vibration recordings

Lebanon is situated on the 1000 km long Levant transform fault that separates the Arabic from the African tectonic plates. In Lebanon, the Levant fault splits up into a set of ramifications that had, in the past, generated major destructive earthquakes causing a lot of destruction and thousands of casualties. The most devastating one was the 551 A.D. offshore earthquake that destroyed Beirut, the capital of Lebanon. This paper presents a site effect study in Beirut, aimed at proposing a framework for future microzonation works in the city. It includes two complementary parts. A 6-month, temporary seismological experiment was first conducted to estimate the site response at 10 sites sampling the main geological units of Beirut on the basis of local and regional earthquake recordings. This spatially sparse information was then complemented by a large number (615) of microtremor measurements covering the Beirut municipality and part of its suburbs with a 400 m dense grid. The recordings were analysed with the standard site-to-reference and horizontal-to-vertical spectral ratio methods for earthquake recordings, and the horizontal-to-vertical ratio for ambient noise recordings. Significant ground motion amplification effects (up to a factor of 8) are found in a few areas corresponding to recent deposits. The consistency between results from earthquake and microtremor recordings allows proposing a map of the resonance frequencies within the city and its suburbs, with frequencies ranging from 0.5 to 5 Hz for the deepest deposits, and 5–10 Hz for shallow areas. Finally, the results are discussed and a way to combine the results obtained from the temporary stations to the great number of recordings coming from the permanent Lebanese network is proposed.     

Rhyacian (2.23–2.20 Ga) juvenile accretion in the southern São Francisco craton,Brazil: Geochemical and isotopic evidence from the Serrinha magmatic suite,Mineiro belt

The Serrinha magmatic suite (Mineiro belt) crops out in the southern edge of the São Francisco craton, comprising the Brito quartz-diorite, Brumado de Cima and Brumado de Baixo granodiorites, granophyres and felsic sub-volcanic and volcanic rocks, part of which intruded into the Nazareno greenstone belt. The suite rocks have petrographic features that are consistent with magma supercooling due to the low water content combined with volatile loss, leading to crystallization of quartz and alkaline feldspar at the rims of plagioclase phenocrysts (granophyric intergrowth). The investigated rocks are sub-alkaline, calc-alkaline and show low content in rare earth elements. The U–Pb zircon crystallization ages for the Brumado de Cima granodiorite [2227 ± 22 (23) Ma] and a coeval granophyre [2211 ± 22 (23) Ma], coupled with available single-zircon Pb evaporation ages for the Brito and Brumado de Baixo plutons, are significantly older than the “Minas orogeny” (ca. 2100–2050 Ga) of Quadrilátero Ferrífero area, eastward from the Serrinha suite. Our data establish an early Rhyacian event tectonically linked with the evolution of the Mineiro belt. The bulk Nd isotopic signature [low negative to positive ε_Nd(t) values] of the Serrinha samples are consistent with the important role of Paleoproterozoic mantle components in the magma genesis. The integrated geologic, geochemical and isotopic information suggests that Paleoproterozoic evolution of the Mineiro belt initiated in a passive continental margin basin with deposition of the Minas Supergroup at ca. 2500 Ma. This stage was succeeded by outboard rupture of the oceanic lithosphere with development and coalescence of progressively younger magmatic arcs during Rhyacian time. One of the earliest arcs formed the Serrinha suite. The tectonic collage of the Serrinha and Ritápolis (2190–2120 Ma) arcs produced the NE–SW Lenheiro shear zone, resulting in mylonitization and recrystallization of both the granitoid intrusions and host rocks. As a matter of fact juxtaposition of distinct magmatic units in age and origin took place along the Lenheiros structure in this sector of the Mineiro belt.     

Reaction of OH Radicals with Acetone: Determination of the Branching Ratio for the Abstraction Pathway at 298 K and 1 Torr

We have determined the 2-oxo-propyl CH₃C(O)CH₂ (sometimes called 1-methylvinoxy or acetonyl) radical yield for the reaction of acetone with OH radical relative to the 2-oxo-propyl yields for the reactions of F- and Cl atoms with acetone using the Discharge Flow technique. The 2-oxo-propyl radical has been monitored by Laser Induced Fluorescence LIF at short reaction times in the systems: OH + acetone (R1), F + acetone (R2), and Cl + acetone (R3). From these measurements we have deduced the branching ratio for the 2-oxo-propyl radical formation in the title reaction to be in the range 0.8 R 1.     

Quantifying Damage, Saturation and Anisotropy in Cracked Rocks by Inverting Elastic Wave Velocities

Crack damage results in a decrease of elastic wave velocities and in the development of anisotropy. Using non-interactive crack effective medium theory as a fundamental tool, we calculate dry and wet elastic properties of cracked rocks in terms of a crack density tensor, average crack aspect ratio and mean crack fabric orientation from the solid grains and fluid elastic properties. Using this same tool, we show that both the anisotropy and shear-wave splitting of elastic waves can be derived. Two simple crack distributions are considered for which the predicted anisotropy depends strongly on the saturation, reaching up to 60% in the dry case. Comparison with experimental data on two granites, a basalt and a marble, shows that the range of validity of the non-interactive effective medium theory model extends to a total crack density of approximately 0.5, considering symmetries up to orthorhombic. In the isotropic case, Kachanov's (1994) non-interactive effective medium model was used in order to invert elastic wave velocities and infer both crack density and aspect ratio evolutions. Inversions are stable and give coherent results in terms of crack density and aperture evolution. Crack density variations can be interpreted in terms of crack growth and/or changes of the crack surface contact areas as cracks are being closed or opened respectively. More importantly, the recovered evolution of aspect ratio shows an exponentially decreasing aspect ratio (and therefore aperture) with pressure, which has broader geophysical implications, in particular on fluid flow. The recovered evolution of aspect ratio is also consistent with current mechanical theories of crack closure. In the anisotropic cases—both transverse isotropic and orthorhombic symmetries were considered—anisotropy and saturation patterns were well reproduced by the modelling, and mean crack fabric orientations we recovered are consistent with in situ geophysical imaging. Our results point out that: (1) It is possible to predict damage, anisotropy and saturation in terms of a crack density tensor and mean crack aspect ratio and orientation; (2) using well constrained wave velocity data, it is possible to extrapolate the contemporaneous evolution of crack density, anisotropy and saturation using wave velocity inversion as a tool; 3) using such an inversion tool opens the door in linking elastic properties, variations to permeability.     

Offneria arabicanov. sp. (rudiste, Caprinidae) de l''Aptien inférieur du Jebel Madar (Sultanat d''Oman)

Offneria arabicanov. sp. (rudiste, Caprinidae) est caractérisé par la simplicité de l'architecture de la valve supérieure, bien exprimée par la forme subrectangulaire des canaux où les planchers sont relativement rares, et le faible développement des tabulae. La valve inférieure est beacoup plus complexe, ce qui traduit un taux d'evolution différencié des deux valves. L'espèce a été) trouvée dans l'Aptien inférieur (Formation Shuaiba) du Jebel Madar, dans l'avant pays des nappes des Montagnes d'Oman. Son organisation la rattache au groupe des formes arabo-africaines. A côté de ses caractères évolutifs, elle est intéressante par son potentiel biostratigraphique et paléobiologéographique.

Abstract

Offneria arabicanov. sp. (rudist, Caprinidae) is characterized by the simplicity of the upper valve, well expressed by the subrectangular shape of the canals where horizontal partitions are relatively rare, and the weak development of the tabulae. The lower valve is far more complex, which means distinctive evolutionary rates for the two valves. The species was found in the Lower Aptian (Shuaiba Formation) of the Jebel Madar, in the foreland of the Oman Mountain nappes. By its overall organisation it belongs to the Arabo-African group of species. Besides its evolutionary characters this form is interesting because of its biostratigraphic and palaeobiogeographic potential.     

Large wood potential,piece characteristics,and flood effects in Swiss mountain streams

We present results of two studies on the (1) potential wood load in steep headwater streams and (2) properties of large wood (LW) transported in mountain rivers during the large August 2005 flood event in Switzerland. Ten headwater reaches of 1000 m length were surveyed in different regions of Switzerland. The potential wood load was estimated for in-channel deadwood, and possible driving factors were explored. Correlations were found with dead wood volume on hillslopes and mean channel width. We established size distributions of LW pieces and identified probable recruitment processes. Four reaches were resurveyed after an exceptionally severe flood in August 2005, showing limited LW transport in channels but considerable wood input by mass wasting processes. In addition, characteristics of deposits of LW along mountain rivers affected by the 2005 flood were investigated. Diameter and length distribution of transported and deposited pieces were comparable to those of LW from steep headwater streams, yet with considerably fewer long pieces in the deposits of mountain rivers. Most LW pieces were fresh wood, indicating that the portion of in-channel deadwood transported during the 2005 flood was limited. Findings of the study contribute to a better understanding of LW dynamics in Alpine mountain streams.     

Wind storm risk management: sensitivity of return period calculations and spread on the territory

Modeling and forecasting damage from wind storms is a major issue for insurance companies. In this article, we focus on the sensitivity of estimations of return periods for extreme events with respect to modeling assumptions and the type of input data. Numerous variables play a role: the quality of data concerning the location of insured buildings and weather report homogeneity, missing updates for correcting non-stationarities concerning the insurance portfolio history, ground roughness or climate change, the evolution of the model after an unprecedented event such as the Lothar storm observed in 1999 in Europe, temporal aggregation of daily events over several days, where events could span over several days up to one week, and storm trajectories, which could change due to global warming or sweep larger areas. Our work explores three important aspects. First, we highlight the geographic heterogeneity of the spatial distribution of wind speeds and the resulting damages. Therefore, we propose to partition the French territory into 6 relatively homogeneous storm zones, based on the dependence among observed wind speeds and geographic distance. Second, we extend a storm index—defined in Mornet et al. (Risk Anal 35:2029–2056, 2015)—to take into account geographic heterogeneity, and we analyze its tail behavior to show the difficulties met to obtain reliable results on extreme events. Third, we explore the calculation of Solvency Capital Requirements based on a model that we propose for the annual claim amount distribution. The purpose of our analysis is to quantify and to point out the high level of uncertainty in the computation of return periods and of other quantities strongly influenced by extreme events.     

A new protocol for oxygen isotope analysis of authigenic and biogenic fine silica grains using laser-extraction technique

We report here a 30 W CO₂ laser heating protocol for analyzing oxygen isotope composition (δ¹⁸O in ‰ vs. V-SMOW) of quartz and amorphous silica grains lower than 50 and 2 μm with a good external precision (1σ < 0.15‰). This technique is used to investigate δ¹⁸O composition of macro-, micro- and crypto-crystalline quartz cements of quartzite levels occurring in a sand sequence from the South of France (Apt Series), after a physical separation of the quartz cements. δ¹⁸O data obtained from this technique are compared with δ¹⁸O data obtained from in situ ion microprobe analyses. This study also presents promising results on δ¹⁸O analysis of phytoliths obtained with the laser heating protocol (1σ < 0.1‰).