澳大利亚的第三纪及第三纪—第四纪过渡期(英文)

第三纪的板块运动驱动着澳大利亚的气候和植被进行演化。广布的湿润森林区是澳大利亚老第三纪的特征。一直到始新世 ,生物多样性都在不断地提高。毫无疑问 ,这是澳大利亚由高南纬区向北部中纬区运移的结果。从始新世到上新世 ,澳大利亚的气候总体上要比现在湿润 ,但降水量季节性变化的增强推动了中新世以后硬叶植物和旱生植物的发展。上新世晚期似乎与第四纪一样 ,都出现过周期性干旱。这种干旱与冰期条件有关 ,至少由南澳大利亚晚第四纪的记录可以认识到这一点 ,澳大利亚的这段历史与东亚的气候变迁是同步发生的。在东亚 ,印—澳板块的运动致使青藏高原抬升 ,从而引发了区内乃至全球气候的巨变。穿越赤道区的季风和信风的环流格局 ,致使新第三纪和第四纪中国与澳大利亚的气候系统的相关性更强。     

Conversion between solid and beam element solutions of finite element method based on meta-modeling theory: development and application to a ramp tunnel structure

In this study, a new method for conversion of solid finite element solution to beam finite element solution is developed based on the meta-modeling theory which constructs a model consistent with continuum mechanics. The proposed method is rigorous and efficient compared to a typical conversion method which merely computes surface integration of solid element nodal stresses to obtain cross-sectional forces. The meta-modeling theory ensures the rigorousness of proposed method by defining a proper distance between beam element and solid element solutions in a function space of continuum mechanics. Results of numerical verification test that is conducted with a simple cantilever beam are used to find the proper distance function for this conversion. Time history analysis of the main tunnel structure of a real ramp tunnel is considered as a numerical example for the proposed conversion method. It is shown that cross-sectional forces are readily computed for solid element solution of the main tunnel structure when it is converted to a beam element solution using the proposed method. Further, envelopes of resultant forces which are of primary importance for the purpose of design, are developed for a given ground motion at the end.     

Regional setting of Håkon Mosby Mud Volcano, SW Barents Sea margin

The Håkon Mosby Mud Volcano (HMMV) is a seafloor mud volcano, having a 1-km-diameter circular shape and a relief of 8–10?m. HMMV is located within a slide scar on the Bjørnøya glacial submarine fan on the SW Barents Sea slope, and is underlain by a >6-km-thick Cenozoic sequence. Multichannel seismic data reveal a 1- to 2-km-wide disturbed zone, which extends to a depth of >3?km below the HMMV. We relate the zone to the presence of free gas. The seismic data are compatible with an intrasedimentary sourced mud volcano related to the glacial sedimentation history and mass movements.     

A system for large volume aerosol sampling in the stratosphere using electrostatic precipitation

Summary An instrumental system for securing aerosol samples in the stratosphere by electrostatic precipitation has been developed. The system is designed to be balloon borne to altitudes between 30 km and 45 km and to collect with high efficiency the aerosol content of the stratosphere at these altitudes. Volumetric sampling rates of one meter³ sec^–1 ambient air are obtained with the sampling configuration with collection efficiency in excess of 95 percent for particles between .01 microns (mmd) and 2 microns (mmd).Specially developed associated instrumentation for altitude and air flow measurement points to an important versatility in the application of gas discharges for low-pressure (or high altitude) altimetry and anemometry over a very wide range of air densities and tempertures.The theory, operation, and performance of the aerosol sampling system and associated subsytems are described. Certain new observations of low-density corona physics phenomena are reported and potential applications to other areas of research and technology are indicated.

---

Zusammenfassung Es wurde ein Instrument entwickelt, mit dem man Aerosolproben aus der Stratosphäre durch elektrostatischen Niederschlag erhalten kann. Das System wird von einem Ballon in Höhen zwischen 30 und 45 km getragen und sammelt mit hoher Wirksamkeit Proben des Aerosolgehalts in diesen Höhen. Mit dem Instrument wird eine Sammelgeschwindigkeit von 1 m³/sek erreicht bei einer Sammelwirksamkeit von mehr als 95% für Partikel von Größen zwischen 0,01 und 2 Mikron.Besonders entwickelte angeschlossene Instrumente zur Messung der Höhe und der Luftströmungen zeigen die wesentliche Vielseitigkeit der Anwendung von Gasentladungen für die Höhenmessung und Windmessung bei niedrigem Druck (oder in großen Höhen) in einem großen Bereich der Luftdichte und der Temperatur.Es werden die Theorie, die Arbeitsweise und die Ausführung des Aerosolprobeninstrumentes und der angeschlossenen Hilfssysteme beschrieben. Es wird über einige neue Beobachtungen aus dem Bereich der Phänomene der Gasentladungen bei niedriger Dichte berichtet und neue mögliche Anwendungen in anderen Zweigen der Forschung und Technologie werden angegeben.

---

Résumé On a construit un instrument au moyen duquel on peut obtenir des échantillons d'aérosole stratosphérique par précipitation électrostatique. Le système est emporté par un ballon à des altitudes de 30 à 45 km et rassemble avec efficacité des echantillons du contenu de l'aérosole à ces altitudes. Avec cet appareil, on obtient une vitesse de prise de 1 m³/sec avec une efficacité de plus de 95% pour les particules comprises entre 0,01 et 2 microns.Des appareils spéciaux annexes permettent de mesurer la hauteur et les courants d'air. Ils démontrent les possibilités multiples de l'utilisation de la décharge dans un gaz pour la mesure de l'altitude et des vents par pression très faible (ou à très haute altitude) dans un domaine étendu tant de la densité de l'air que de la température.On décrit dans ce mémoire la théorie, le mode de travail et l'exécution de cet instrument de prise d'échantillons d'aérosoles ainsi que des systèmes auxiliaires annexes. On rapporte sur quelques nouvelles observations faites dans le domaine des phénomènes connexes à la décharge dans un gaz par faible densité. On indique en outre de nouvelles possibilités d'utilisation du système dans d'autres branches de la recherche ou de la technologie.

---

---

With 16 Figures

---

This work has been supported by the Division of Biology and Medicine, U. S. Atomic Energy Commission, under contract at (30-1)-2363 with Del Electronics.     

Structure of the crust and upper mantle in Canada

The seismic probing of the crust and upper mantle in Canada started in 1938 and since then has involved many government and university groups using a wide variety of techniques. These have included simple profiling with both wide and narrow station spacing, areal time-term surveys, detailed deep reflection experiments, very long-range refraction studies and the analysis of surface wave dispersion between stations of the Canadian Standard Network.

A review of the published interpretation leads to the general conclusion that:

1. (1) P_n-velocities vary from a value possibly as low as 7.7 km/sec under Vancouver Island to 8.6 km/sec and higher in the extreme eastern part of the shield and some parts of the Atlantic coast.

2. (2) Large areas of Canada have a crustal thickness of 30–40 km, with Vancouver Island, the southwestern Prairies, the Lake Superior basin and parts of the eastern shield of Quebec being thicker. No continental area in Canada is known to have a crust thinner than 29 km.

3. (3) The Riel discontinuity — a deep intra-crustal reflector and sometime refractor, is widely reported in the Prairies and Manitoba. It is not seen to the north in the vicinity of Great Slave Lake, nor in the Hudson Bay, Lake Superior and Maritime regions, nor in the interior of British Columbia. It may be present in some areas of the eastern shield.

4. (4) As experiments have become more detailed, crustal structures of greater complexity have been revealed. The concept that crustal structure becomes simpler with increasing depth is apparently unfounded.

Long-range refraction studies suggest that the Gutenberg P-wave low-velocity channel is poorly developed under the Canadian Shield. The analysis of the dispersion of surface waves, however, suggests that the channel is better developed for S-waves, and is present throughout the country. The lid of the channel is deepest under the central shield and shallowest under the Cordillera.     

Use of remote sensing for evapotranspiration monitoring over land surfaces

Abstract

Monitoring evapotranspiration (ET) at large scales is important for assessing climate and anthropogenic effects on natural and agricultural ecosystems. This paper describes techniques used in evaluating ET with remote sensing, which is the only technology that can efficiently and economically provide regional and global coverage. Some of the empirical/statistical techniques have been used operationally with satellite data for computing daily ET at regional scales. The more complex numerical simulation models require detailed input parameters that may limit their application to regions containing a large database of soils and vegetation properties. Current efforts are being directed towards simplifying the parameter requirements of these models. Essentially all energy balance models rely on an estimate of the available energy (net radiation less soil heat flux). Net radiation is not easily determined from space, although progress is being made. Simplified approaches for estimating soil heat flux appear promising for operational applications. In addition, most ET models utilize remote sensing data in the shortwave and thermal wavelengths to measure key boundary conditions. Differences between the radiometric surface temperature and aerodynamic temperature can be significant and progress in incorporating this effect is evident. Atmospheric effects on optical data are significant, and optical sensors cannot see through clouds. This has led some to use microwave observations as a surrogate for optical data to provide estimates of surface moisture and surface temperature; preliminary results are encouraging. The approaches that appear most promising use surface temperature and vegetation indices or a time rate of change in surface temperature coupled to an atmospheric boundary layer model. For many of these models, differences with ET observations can be as low as 20% from hourly to daily time scales, approaching the level of uncertainty in the measurement of ET and contradicting some recent pessimistic conclusions concerning the utility of remotely sensed radiometric surface temperature for determining the surface energy balance.     

On the quasi-steady approximation for evaporating and condensing water drops in air

Summary The quasi-steady approximation, commonly used to calculate the rate of evaporation or condensation of water drops, is shown formally to be valid provided that the vapour of the condensate is very dilute. A uniformly valid asymptotic expansion is found for the full set of equations under isothermal conditions. The leading terms of the expansion correspond to the quasi-steady approximation.     

Exploration rock geochemistry for gold, Parkes, New South Wales, Australia

The London-Victoria lode-type Au deposit near Parkes, New South Wales, was discovered in 1863 and became the subject of modern exploration in 1980 after about 75 years of little or no activity. The deposit lies within Palaeozoic tuffaceous, andesitic rocks. Soil geochemistry was the main technique used to define drill targets, and the deposit is now at an advanced state of assessment for probable development.Rock geochemistry is being investigated as an aid in drill-core interpretation in the search for extensions to the London-Victoria deposit and other similar deposits in the district.At an early stage of the rock-geochemical work it became clear that minor basemetal mineralization was also present in the structural hanging wall at between 30 and 70 m from the lode Au deposit. Interpretation of the geochemical signatures for major elements (Ca, Mg, Na, K, Fe) and trace elements (Cu, Pb, Zn, Mn) is confused by an overlap and merging of responses from the Au and base-metal mineralization. The measurement of bromine-soluble Sb, As, Bi, and Te, together with the more conventional major and trace elements, permits discrimination between geochemical halos related to the Au and those resulting from minor base metal mineralization.The results demonstrate the use of rock geochemistry for Au exploration, its usefulness in drawing attention to geological features, and the utility of bromine-soluble trace elements commonly associated with gold mineralization.     

Phosphorus removal in low alkalinity secondary effluent using alum

The alkalinity plays an important role in phosphorus removal using coagulant. The dosage of coagulant in the low alkalinity wastewater is limited due to rapid pH changes. In the present study, a series of jar test was conducted using low alkalinity wastewater (50 mg/L) to evaluate the optimum pH, dosage and performance parameters (slow mixing and settling time) for the common coagulant alum. From the experiment, it was found that the dosage of coagulant and removal of phosphorus depend upon the pH of the wastewater after adding coagulant. The final optimum pH for efficient P removal was found to be within the range of 5.7–5.9. This range acts as an indicator and it is the maximum tolerable pH range for phosphorus removal for low alkalinity wastewater. The optimum time for slow mix and settling was found to be 20 min. The optimum mole ratio of alum to remove one mole of phosphorous was found to be 2.3. The alum coagulation at pH 7 produced effluent with the total residual phosphorus and reactive phosphorus content of 0.3 and 0.9 mg/L, respectively.     

ENCORE: the effect of nutrient enrichment on coral reefs. Synthesis of results and conclusions

Coral reef degradation resulting from nutrient enrichment of coastal waters is of increasing global concern. Although effects of nutrients on coral reef organisms have been demonstrated in the laboratory, there is little direct evidence of nutrient effects on coral reef biota in situ. The ENCORE experiment investigated responses of coral reef organisms and processes to controlled additions of dissolved inorganic nitrogen (N) and/or phosphorus (P) on an offshore reef (One Tree Island) at the southern end of the Great Barrier Reef, Australia. A multi-disciplinary team assessed a variety of factors focusing on nutrient dynamics and biotic responses. A controlled and replicated experiment was conducted over two years using twelve small patch reefs ponded at low tide by a coral rim. Treatments included three control reefs (no nutrient addition) and three + N reefs (NH4Cl added), three + P reefs (KH2PO4 added), and three + N + P reefs. Nutrients were added as pulses at each low tide (ca twice per day) by remotely operated units. There were two phases of nutrient additions. During the initial, low-loading phase of the experiment nutrient pulses (mean dose = 11.5 microM NH4+; 2.3 microM PO4(-3)) rapidly declined, reaching near-background levels (mean = 0.9 microM NH4+; 0.5 microM PO4(-3)) within 2-3 h. A variety of biotic processes, assessed over a year during this initial nutrient loading phase, were not significantly affected, with the exception of coral reproduction, which was affected in all nutrient treatments. In Acropora longicyathus and A. aspera, fewer successfully developed embryos were formed, and in A. longicyathus fertilization rates and lipid levels decreased. In the second, high-loading, phase of ENCORE an increased nutrient dosage (mean dose = 36.2 microM NH4+; 5.1 microM PO4(-3)) declining to means of 11.3 microM NH4+ and 2.4 microM PO4(-3) at the end of low tide) was used for a further year, and a variety of significant biotic responses occurred. Encrusting algae incorporated virtually none of the added nutrients. Organisms containing endosymbiotic zooxanthellae (corals and giant clams) assimilated dissolved nutrients rapidly and were responsive to added nutrients. Coral mortality, not detected during the initial low-loading phase, became evident with increased nutrient dosage, particularly in Pocillopora damicornis. Nitrogen additions stunted coral growth, and phosphorus additions had a variable effect. Coral calcification rate and linear extension increased in the presence of added phosphorus but skeletal density was reduced, making corals more susceptible to breakage. Settlement of all coral larvae was reduced in nitrogen treatments, yet settlement of larvae from brooded species was enhanced in phosphorus treatments. Recruitment of stomatopods, benthic crustaceans living in coral rubble, was reduced in nitrogen and nitrogen plus phosphorus treatments. Grazing rates and reproductive effort of various fish species were not affected by the nutrient treatments. Microbial nitrogen transformations in sediments were responsive to nutrient loading with nitrogen fixation significantly increased in phosphorus treatments and denitrification increased in all treatments to which nitrogen had been added. Rates of bioerosion and grazing showed no significant effects of added nutrients. ENCORE has shown that reef organisms and processes investigated in situ were impacted by elevated nutrients. Impacts were dependent on dose level, whether nitrogen and/or phosphorus were elevated and were often species-specific. The impacts were generally sub-lethal and subtle and the treated reefs at the end of the experiment were visually similar to control reefs. Rapid nutrient uptake indicates that nutrient concentrations alone are not adequate to assess nutrient condition of reefs. Sensitive and quantifiable biological indicators need to be developed for coral reef ecosystems. The potential bioindicators identified in ENCORE should be tested in future research on coral reef/nutrient interactions. Synergistic and cumulative effects of elevated nutrients and other environmental parameters, comparative studies of intact vs. disturbed reefs, offshore vs. inshore reefs, or the ability of a nutrient-stressed reef to respond to natural disturbances require elucidation. An expanded understanding of coral reef responses to anthropogenic impacts is necessary, particularly regarding the subtle, sub-lethal effects detected in the ENCORE studies.