The special climate change fund: origins and prioritisation assessment

Abstract

A central issue in tackling climate change is to understand to what extent different short-term mitigation strategies are consistent with long-term stabilization targets. The present article aims at cross-comparing emission paths derived by plausible short-term policies against those implied by long-term climate targets, comparing, for example, differences in peak periods. Short-term policies considered are, for instance, Kyoto-type targets with or without participation by the USA and/or by developing countries. Long-term targets focus instead on stabilization of CO₂ concentrations, radiative forcing and the increase in atmospheric temperature relative to pre-industrial levels. In order to account for the uncertainty surrounding the climate cycle, for each long-term goal multiple paths of emission—the most probable, the optimistic and the pessimistic projections—are considered in the comparison exercise. Comparative analysis is performed using the FEEM-RICE model, a regional economy—climate model. The results suggest that some early policy action should take place for short-term emissions to be compatible with long-term targets. In particular, the Kyoto-type regimes appear to be on a compatible emission path, at least up to the second commitment period. However, this is no longer the case when assuming a pessimistic realization of the uncertain climate parameters.     

Highly reproducible quasi-mosaic crystals as optical components for a Laue lens

The realization of a Laue lens for astronomical purposes involves the mass production of a series of crystalline tiles as optical components, allowing high-efficiency diffraction and high-resolution focusing of photons. Crystals with self-standing curved diffraction planes is a valid and promising solution. Exploiting the quasi-mosaic effect, it turns out to be possible to diffract radiation at higher resolution. In this paper we present the realization of 150 quasi-mosaic Ge samples, bent by grooving one of their largest surface. We show that grooving method is a viable technique to manufacture such crystals in a simple and very reproducible way, thus compatible with mass production. Realized samples present very homogenous curvature. Furthermore, with a specific chemical etch, it is possible to fine adjust one by one the radius of curvature of the grooved samples. Realized crystals was selected for the ASI’s Laue project, that involves the implementation of a prototype of a Laue lens for hard X- and soft γ-ray astronomy.     

Introspection on improper seismic retrofit of Basilica Santa Maria di Collemaggio after 2009 Italian earthquake

The 2009 L’Aquila, Italy earthquake highlighted the seismic vulnerability of historic masonry building structures due to improper "strengthening" retrofit work that has been done in the last 50 years. Italian seismic standards recommend the use of traditional reinforcement techniques such as replacing the original wooden roof structure with new reinforced concrete (RC) or steel elements, inserting RC tie-beams in the masonry and new RC floors, and using RC jacketing on the shear walls. The L’Aquila earthquake revealed the numerous limitations of these interventions, because they led to increased seismic forces (due to greater additional weight) and to deformation incompatibilities of the incorporated elements with the existing masonry walls. This paper provides a discussion of technical issues pertaining to the seismic retrofit of the Santa Maria di Collemaggio Basilica and in particular, the limitations of the last (2000) retrofit intervention. Considerable damage was caused to the church because of questionable actions and incorrect and improper technical choices.     

LiDAR-based digital terrain analysis of an area exposed to the risk of lava flow invasion: the Zafferana Etnea territory, Mt. Etna (Italy)

The town of Zafferana Etnea, located on the southeastern slope of Mt. Etna volcano (Italy), has been repeatedly threatened by lava flows in recent centuries. The last serious threat occurred during the 1991–1993 eruption, when the lava front came to a halt only 1.7 km from the centre of town. Morphostructural data derived from light detection and ranging (LiDAR) surveys carried out on Etna in 2005 have enabled us to evaluate the risk of lava invasion in a section (16 km²) of the Zafferana Etnea territory. Qualitative and quantitative results are obtained combining the information derived from LiDAR analysis with geological, morphological and structural data using geographic information systems technology (GIS). The study quantifies in unprecedented detail the areal extent and volume of forested and urban areas and its degree of exposure to different levels of hazard from future lava invasion. Nearly 52% of the urban texture fall into areas of moderate to high risk from lava invasion. Future land use planning should take these findings into account and promote new development preferentially in areas of lower risk.     

Fundamental physics and absolute positioning metrology with the MAGIA lunar orbiter

MAGIA is a mission approved by the Italian Space Agency (ASI) for Phase A study. Using a single large-diameter laser retroreflector, a large laser retroreflector array and an atomic clock onboard MAGIA we propose to perform several fundamental physics and absolute positioning metrology experiments: VESPUCCI, an improved test of the gravitational redshift in the Earth?CMoon system predicted by General Relativity; MoonLIGHT-P, a precursor test of a second generation Lunar Laser Ranging (LLR) payload for precision gravity and lunar science measurements under development for NASA, ASI and robotic missions of the proposed International Lunar Network (ILN); Selenocenter (the center of mass of the Moon), the determination of the position of the Moon center of mass with respect to the International Terrestrial Reference Frame/System (ITRF/ITRS); this will be compared to the one from Apollo and Lunokhod retroreflectors on the surface; MapRef, the absolute referencing of MAGIA??s lunar altimetry, gravity and geochemical maps with respect to the ITRF/ITRS. The absolute positioning of MAGIA will be achieved thanks to: (1) the laboratory characterization of the retroreflector performance at INFN-LNF; (2) the precision tracking by the International Laser Ranging Service (ILRS), which gives two fundamental contributions to the ITRF/ITRS, i.e. the metrological definition of the geocenter (the Earth center of mass) and of the scale of length; (3) the radio science and accelerometer payloads; (4) support by the ASI Space Geodesy Center in Matera, Italy. Future ILN geodetic nodes equipped with MoonLIGHT and the Apollo/Lunokhod retroreflectors will become the first realization of the International Moon Reference Frame (IMRF), the lunar analog of the ITRF.     

A Warning System for Stromboli Volcano Based on Statistical Analysis

In this paper we describe a warning system based on statistical analysis for the purpose of monitoring ground deformation at the Sciara del Fuoco (Stromboli Volcano, Sicily). After a statistical analysis of ground deformation time-series measured at Stromboli by the monitoring system known as THEODOROS (THEOdolite and Distancemeter Robot Observatory of Stromboli), the paper describes the solution adopted for implementing the warning system. A robust statistical index has been defined in order to evaluate the movements of the area. A fuzzy approach has been proposed to evaluate an AI (Alarm Intensity) index which indicates the level of hazard of the Sciara del Fuoco sliding.     

Formation of an ‘a’ā lava delta: insights from time-lapse multibeam bathymetry and direct observations during the Stromboli 2007 eruption

Five consecutive multibeam bathymetries collected before, during, and after the 2007 Stromboli eruption, combined with visual inspections, allowed us to document the morphological evolution of an ‘a’ā lava-fed delta and to reconstruct the main processes acting during its submarine emplacement. The 2007 Stromboli delta extended down to 600-m water depth and covered an area of 420?×?10³ m², with a maximum thickness of 65 m and a total estimated volume of ≈7?×?10⁶ m³, i.e., three times larger than its subaerial counterpart. The lava delta grew mainly through the emplacement of discrete lobes about 50–150 m in size. Lobes were fed from point sources along the paleoshoreline, and their subaqueous pathways seem to be mainly controlled by the submarine morphology, with flows mostly filling in depressions left by previous lobes. The main controlling factors on the lobe morphology and thickness are the effusion rates and the pre-eruption morphology, i.e., the geometry and gradients of the basal surface. Data also shows that sudden slope failure of portions of the submarine delta may occur simultaneously with accretion, implying that a significant part of the delta material can be transported to greater depths by submarine gravity flows. The present study is relevant for future monitoring and hazard assessment during the growth of active lava-fed deltas as well as for a better interpretation of ancient volcaniclastic successions inland.     

Integrating airborne and multi‐temporal long‐range terrestrial laser scanning with total station measurements for mapping and monitoring a compound slow moving rock slide

A slow moving compound rock slide located in the northern Apennines of Italy was mapped and monitored through the integration of Airborne Laser Scanning (ALS), multi‐temporal long‐range Terrestrial Laser Scanning (TLS), and Automated Total Station (ATS) measurements. Landslide features were mapped using a High Resolution Digital Terrain Model (HR‐DTM) obtained by merging ALS and TLS data in an Iterative Closest Point (ICP) procedure. Slope movements in the order of centimeters to a few decimeters were quantified with Differential TLS (D‐TLS) based on a Surface Matching approach and supported by ATS data to define stable reference surfaces. The integrated approach allowed mapping of the composite geomorphic features of the rock slide under examination, revealing its complex dynamic nature and further proving that laser scanning is a versatile and widely applicable tool for slope process analysis. Copyright © 2013 John Wiley & Sons, Ltd.     

3. Solar System Formation and Early Evolution: the First 100 Million Years

The solar system, as we know it today, is about 4.5 billion years old. It is widely believed that it was essentially completed 100 million years after the formation of the Sun, which itself took less than 1 million years, although the exact chronology remains highly uncertain. For instance: which, of the giant planets or the terrestrial planets, formed first, and how? How did they acquire their mass? What was the early evolution of the “primitive solar nebula” (solar nebula for short)? What is its relation with the circumstellar disks that are ubiquitous around young low-mass stars today? Is it possible to define a “time zero” (t ₀), the epoch of the formation of the solar system? Is the solar system exceptional or common? This astronomical chapter focuses on the early stages, which determine in large part the subsequent evolution of the proto-solar system. This evolution is logarithmic, being very fast initially, then gradually slowing down. The chapter is thus divided in three parts: (1) The first million years: the stellar era. The dominant phase is the formation of the Sun in a stellar cluster, via accretion of material from a circumstellar disk, itself fed by a progressively vanishing circumstellar envelope. (2) The first 10 million years: the disk era. The dominant phase is the evolution and progressive disappearance of circumstellar disks around evolved young stars; planets will start to form at this stage. Important constraints on the solar nebula and on planet formation are drawn from the most primitive objects in the solar system, i.e., meteorites. (3) The first 100 million years: the “telluric” era. This phase is dominated by terrestrial (rocky) planet formation and differentiation, and the appearance of oceans and atmospheres.     

Extragalactic Astronomy with the VLTI: a new window on the Universe

Interferometry in the optical and near infrared has so far played a marginal role in Extragalactic Astronomy. Active Galactic Nuclei are the brightest and most compact extragalactic sources, nonetheless only a very limited number could be studied with speckle interferometry and none with long baseline interferometry. The VLTI will allow the study of moderately faint extragalactic objects with very high spatial resolution thus opening a new window on the universe. With this paper we focus on three scientific cases to show how AMBER and MIDI can be used to tackle open issues in extragalactic astronomy. This revised version was published online in July 2006 with corrections to the Cover Date.