Water quality and relationship between superficial and ground water in Rome (Aniene River basin,central Italy)

Chemical, physical, and biological features of streams and ground water of the North-Eastern area of Rome are jointly analyzed in order to assess the status of water resources. Ground water was investigated with classical survey methods (pH, temperature, and electric conductivity). Microbiological pollution, faunal composition, and stream surrounding area conditions of surface waters were studied, in order to quantify the residual value of these ecosystems from both a human and an environmental point of view. Results show a general impairment of the system and the comparison between superficial waters and shallow ground waters makes it possible to detect the presence of a connection between the two levels. This relationship occurs as an exchange from superficial waters (streams and rivers) to the shallow aquifers. Where superficial waters are contaminated, as in the Tor Sapienza stream, pollutants move to the shallow aquifers too, due to the decreased pressure of the over-exploited aquifer. Moreover, uncontrolled drilling activity, diffused in urban areas, makes it possible the connection between shallow and deep ground water. Notwithstanding this, the mixing between superficial and deep ground water system in Rome is not very widespread and, apparently, limited to restricted areas.     

Buried pockmarks on the Top Chalk surface of the Danish North Sea and their potential significance for interpreting palaeocirculation patterns

Three-dimensional (3D) seismic data from the southern Danish North Sea were used to analyse the morphology and spatial distribution of depressions in the Danian Chalk deposit. Previously, these depressions were either interpreted as karst structures or pockmarks. The observed depressions occur in an interval from 25 ms below to 12 ms above the Top Chalk surface. Three types of depressions were differentiated based on their plan-view geometry and their degree of symmetry: Type 1, comprising sub-circular and symmetrical depressions, is the dominant group (ca. 70 %). Type 2, elongated and symmetrical depressions, represents only a small fraction (ca. 5 %). The elongated and asymmetrical depressions of Type 3 compose ca. 25 %. In cross section, each depression type can be either characterised by a V- or a U-shape. The maximum size of the depressions ranges from 50 to 580 m, with an average internal depth of 10 m. We interpret the depressions as pockmarks formed by the expulsion of biogenic or thermogenic fluids at the Danian seafloor. Likely, the initial form of the pockmarks has been circular (Type 1) and was subsequently modified for Types 2 and 3 to an elongated form by currents. The long axis of the pockmarks is interpreted to represent the effective current direction. The inferred direction is sub-parallel to the palaeobathymetric contours. The 3D seismic interpretation of pockmarks presented in this paper contributes to the understanding of fluid migration and palaeocirculation patterns during the sedimentation of the terminal Chalk Group in the southern Danish North Sea.     

Geometry and Properties of the Excavation-Induced Fractures at the Meuse/Haute-Marne URL Drifts

The performance and safety assessment and technology demonstration are the main objectives of research programs for feasibility studies for deep geological repository of radioactive waste. In this context, the French national radioactive waste management agency (ANDRA) started to develop the Meuse/Haute-Marne underground research laboratory (URL) at Bure, nearly 300 km East of Paris. The host formation consists of a Callovo-Oxfordian claystone found between 420 and 550 m below ground, overlain and underlain by poorly permeable carbonate formations. One of the major concerns related to performance assessment is the excavation-induced fractures which may provide groundwater preferential pathway for radionuclide migration. The extent of the fractures possibly acting significantly in the radionuclide migration is known as the excavation damaged zone (EDZ). A scientific study on the EDZ characterization is performed at the main level of the URL (?490 m). Observations such as structural analysis on core, overcored resin-filled samples, geological survey of the drift face and sidewalls, were made to better understand the fracture network characteristics, extent and its generation. Pulse and constant head test hydraulic conductivity measurements were performed with multi packer system to estimate the extension of the EDZ hydraulic conductivity. Fractures exhibited high transmissivity near the excavation walls, but farther from the exaction walls, shear fractures showed hydraulic conductivity values reflecting values of undisturbed or slightly disturbed rock mass condition. The major findings in terms of geometry and properties of excavation-induced fractures are discussed in detail in this paper. For example, it is observed that the shape of the fracture network depends on the orientation of the drift in relation to the orientation of the in situ stress field.     

Formation of an ‘a’ā lava delta: insights from time-lapse multibeam bathymetry and direct observations during the Stromboli 2007 eruption

Five consecutive multibeam bathymetries collected before, during, and after the 2007 Stromboli eruption, combined with visual inspections, allowed us to document the morphological evolution of an ‘a’ā lava-fed delta and to reconstruct the main processes acting during its submarine emplacement. The 2007 Stromboli delta extended down to 600-m water depth and covered an area of 420?×?10³ m², with a maximum thickness of 65 m and a total estimated volume of ≈7?×?10⁶ m³, i.e., three times larger than its subaerial counterpart. The lava delta grew mainly through the emplacement of discrete lobes about 50–150 m in size. Lobes were fed from point sources along the paleoshoreline, and their subaqueous pathways seem to be mainly controlled by the submarine morphology, with flows mostly filling in depressions left by previous lobes. The main controlling factors on the lobe morphology and thickness are the effusion rates and the pre-eruption morphology, i.e., the geometry and gradients of the basal surface. Data also shows that sudden slope failure of portions of the submarine delta may occur simultaneously with accretion, implying that a significant part of the delta material can be transported to greater depths by submarine gravity flows. The present study is relevant for future monitoring and hazard assessment during the growth of active lava-fed deltas as well as for a better interpretation of ancient volcaniclastic successions inland.     

Cosmological Parameters from Cosmic Microwave Background Anisotropies: Status and Prospects

A survey is made of the present constraints on cosmological parameters from Cosmic Microwave Background Anisotropies. This revised version was published online in July 2006 with corrections to the Cover Date.     

Ephemeral rollover points and clinothem evolution in the modern Po Delta based on repeated bathymetric surveys

Reconstructions of ancient delta systems rely typically on a two-dimensional (2D) view of prograding clinothems but may miss their three-dimensional (3D) stratigraphic complexity which can, instead, be best documented on modern delta systems by integrating high-resolution geophysical data, historical cartography, core data and geomorphological reconstructions offshore. We quantitatively compare three precisely positioned, high-resolution multi-beam bathymetry maps in the delta front and pro delta sectors (0.3 to 10 m water depth) of Po di Pila, the most active of the modern Po Delta five branches. By investigating the detailed morphology of the prograding modern Po Delta, we shed new light on the mechanisms that control the topset to foreset transition in clinothems and show the temporal and spatial complexity of a delta and its pro delta slope, under the impact of oceanographic processes. This study documents the ephemeral nature of the rollover point at the transition between sandy topset (fluvial, delta plain to mouth-bar) and muddy seaward-dipping foreset deposits advancing, in this case, in >20 m of water depth. Three multibeam surveys, acquired between 2013 and 2016, document the complexity in space and time of the topset and foreset regions and their related morphology, a diagnostic feature that could not be appreciated using solely 2D, even very high-resolution, seismic profiles. In addition, the comparison of bathymetric surveys gathered with one-year lapses shows the migration of subaqueous sand dunes on the clinothem topset, the formation of ephemeral cut-and-fill features at the rollover point (few m below mean sea level), the presence of collapse depressions derived by sagging of sediments and fluid expulsion (possibly induced by storm waves) on the foreset, and splays of sand likely reflecting gravity flows on the lower foreset. Though the modern Po Delta is anthropogenic in many respects, its subaqueous clinothem can be studied as a scale model for ancient clinothems that are less resolved geometrically and far less constrained chronologically.     

Resilience and brittleness in the ALERTA RIO system: a field study about the decision-making of forecasters

Natural disasters, particularly those triggered by heavy rainfall, may cause major damage and death. However, if an accurate early warning is issued, the damage can be mitigated. In Latin America and Brazil, characteristics of socioeconomic development often lead to a disorderly growth of cities and, consequently, occupation and irregular construction in risk areas. Therefore, forecasts of heavy rainfall, as well as preventative and mitigatory actions based on meteorological data/alerts, are essential to saving lives and minimizing material loss. An event that would have benefited from such actions is that which occurred in the mountainous region of Rio de Janeiro in January 2011, when over 800 people lost their lives. This work describes the first research initiative on resilience engineering domain in systems to forecast heavy rains in Rio de Janeiro. The results indicate important sources of brittleness in the system that supports the work of meteorologists, mainly related to the technical and organizational framework, and suggests that the main source of resilience in dealing with critical situations is the tacit knowledge of experts.     

Atmospheric sources and sinks of volcanogenic elements in a basaltic volcano (Etna, Italy)

This study reports on the first quantitative assessment of the geochemical cycling of volcanogenic elements, from their atmospheric release to their deposition back to the ground. Etna’s emissions and atmospheric depositions were characterised for more than 2 years, providing data on major and trace element abundance in both volcanic aerosols and bulk depositions. Volcanic aerosols were collected from 2004 to 2007, at the summit vents by conventional filtration techniques. Precipitation was collected, from 2006 to 2007, in five rain gauges, at various altitudes around the summit craters. Analytical results for volcanic aerosols showed that the dominant anions were S, Cl, and F, and that the most abundant metals were K, Ca, Mg, Al, Fe, and Ti (1.5-50 μg m⁻³). Minor and trace element concentrations ranged from about 0.001 to 1 μg m⁻³. From such analysis, we derived an aerosol mass flux ranging from 3000 to 8000 t a⁻¹. Most analysed elements had higher concentrations close to the emission vent, confirming the prevailing volcanic contribution to bulk deposition. Calculated deposition rates were integrated over the whole Etna area, to provide a first estimate of the total deposition fluxes for several major and trace elements. These calculated deposition fluxes ranged from 20 to 80 t a⁻¹ (Al, Fe, Si) to 0.01-0.1 t a⁻¹ (Bi, Cs, Sc, Th, Tl, and U). Comparison between volcanic emissions and atmospheric deposition showed that the amount of trace elements scavenged from the plume in the surrounding of the volcano ranged from 0.1% to 1% for volatile elements such as As, Bi, Cd, Cs, Cu, Tl, and from 1% to 5% for refractory elements such as Al, Ba, Co, Fe, Ti, Th, U, and V. Consequently, more than 90% of volcanogenic trace elements were dispersed further away, and may cause a regional scale impact. Such a large difference between deposition and emission fluxes at Mt. Etna pointed to relatively high stability and long residence time of aerosols in the plume.     

A focal plane detector design for a wide-band Laue-lens telescope

The energy range above 60 keV is important for the study of many open problems in high energy astrophysics such as the role of Inverse Compton with respect to synchrotron or thermal processes in GRBs, non thermal mechanisms in SNR, the study of the high energy cut-offs in AGN spectra, and the detection of nuclear and annihilation lines. Recently the development of high energy Laue lenses with broad energy bandpasses from 60 to 600keV have been proposed for a Hard X ray focusing Telescope (HAXTEL) in order to study the X-ray continuum of celestial sources. The required focal plane detector should have high detection efficiency over the entire operative range, a spatial resolution of about 1mm, an energy resolution of a few keV at 500keV and a sensitivity to linear polarization. We describe a possible configuration of the focal plane detector based on several CdTe/CZT pixelated layers stacked together to achieve the required detection efficiency at high energy. Each layer can operate both as a separate position sensitive detector and polarimeter or work with other layers to increase the overall photopeak efficiency. Each layer has a hexagonal shape in order to minimize the detector surface required to cover the lens field of view. The pixels would have the same geometry so as to provide the best coupling with the lens point spread function and to increase the symmetry for polarimetric studies.     

Stable isotope study of the Archaean rocks of the Vredefort impact structure,central Kaapvaal Craton,South Africa

The Vredefort dome in the Kaapvaal Craton was formed as a result of the impact of a large meteorite at 2.02 Ga. The central core of Archaean granitic basement rocks is surrounded by a collar of uplifted and overturned strata of the Witwatersrand Supergroup, exposing a substantial depth section of the Archaean crust. Orthogneisses of the core show little variation in whole-rock δ ¹⁸O value, with the majority being between 8 and 10‰, with a mean of 9.2‰ (n = 35). Quartz and feldspar have per mil differences that are consistent with O-isotope equilibrium at high temperatures, suggesting minimal interaction with fluids during subsequent cooling. These data refute previous suggestions that the Outer Granite Gneiss (OGG) and Inlandsee Leucogranofels (ILG) of the core represent middle and lower crust, respectively. Granulite-facies greenstone remnants from the ILG have δ ¹⁸O values that are on average 1.5‰ higher than the ILG host rocks and are unlikely, therefore, to represent the residuum from the partial melting event that formed the host rock. Witwatersrand Supergroup sedimentary rocks of the collar, which were metamorphosed at greenschist-to amphibolite-facies conditions, generally have lower δ ¹⁸O values than the core rocks with a mean value for metapelites of 7.7‰ (n = 45). Overall, through an ∼20 km thick section of crust, there is a general increase in whole-rock δ ¹⁸O value with increasing depth. This is the reverse of what is normal in the crust, largely because the collar rocks have δ ¹⁸O values that are unusually low in comparison with metamorphosed sedimentary rocks worldwide. The collar rocks have δD values ranging from −35 to −115‰ (average −62‰, n = 29), which are consistent with interaction with water of meteoric origin, having a δD of about −25 to −45‰. We suggest that fluid movement through the collar rocks was enhanced by impact-induced secondary permeability in the dome structure. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.