Modeling flocculation in a hypertidal estuary

When fine particles are involved, cohesive properties of sediment can result in flocculation and significantly complicate sediment process studies. We combine data from field observations and state-of-the-art modeling to investigate and predict flocculation processes within a hypertidal estuary. The study site is the Welsh Channel located at the entrance of the Dee Estuary in Liverpool Bay. Field data consist of measurements from a fixed site deployment during 12–22 February 2008. Grain size, suspended sediment volume concentration, and current velocity were obtained hourly from moored instruments at 1.5 m above bed. Near-bottom water samples taken every hour from a research vessel are used to convert volume concentrations to mass concentrations for the moored measurements. We use the hydrodynamic model Proudman Oceanographic Laboratory Coastal Ocean Modelling System (POLCOMS) coupled with the turbulence model General Ocean Turbulence Model (GOTM) and a sediment module to obtain three-dimensional distributions of suspended particulate matter (SPM). Flocculation is identified by changes in grain size. Small flocs were found during flood and ebb periods—and correlate with strong currents—due to breakup, while coarse flocs were present during slack waters because of aggregation. A fractal number of 2.4 is found for the study site. Turbulent stresses and particle settling velocities are estimated and are found to be related via an exponential function. The result is a simple semiempirical formulation for the fall velocity of the particles solely depending on turbulent stresses. The formula is implemented in the full three-dimensional model to represent changes in particle size due to flocculation processes. Predictions from the model are in agreement with observations for both settling velocity and SPM. The SPM fortnight variability was reproduced by the model and the concentration peaks are almost in phase with those from field data.     

Contamination source detection in water distribution networks using belief propagation

Stochastic Environmental Research and Risk Assessment - We present a Bayesian approach for the Contamination Source Detection problem in water distribution networks. Assuming that contamination is...     

Launching and joining of a product carrier of 30,500 DWT built in two sections

This paper describes the process of launching and joining of two sections of a product carrier of 30,500 DWT built at Dianca shipyard at Puerto Cabello, Venezuela. The specifications and characteristics of this ship are in line with the market requirements. This paper deals with the problems encountered during the decision of dividing the ship in two halves, use of syncrolift for launching and subsequent joining of two halves in the dry dock.     

利用遥感技术建立墨西哥热带地上生物量模型(英文)

Spatially-explicit estimation of aboveground biomass(AGB) plays an important role to generate action policies focused in climate change mitigation,since carbon(C) retained in the biomass is vital for regulating Earth’s temperature.This work estimates AGB using both chlorophyll(red,near infrared) and moisture(middle infrared) based normalized vegetation indices constructed with MCD43A4 MODerate-resolution Imaging Spectroradiometer(MODIS) and MOD44B vegetation continuous fields(VCF) data.The study area is located in San Luis Potosí,Mexico,a region that comprises a part of the upper limit of the intertropical zone.AGB estimations were made using both individual tree data from the National Forest Inventory of Mexico and allometric equations reported in scientific literature.Linear and nonlinear(expo-nential) models were fitted to find their predictive potential when using satellite spectral data as explanatory variables.Highly-significant correlations(p = 0.01) were found between all the explaining variables tested.NDVI62,linked to chlorophyll content and moisture stress,showed the highest correlation.The best model(nonlinear) showed an index of fit(Pseudo-r2) equal to 0.77 and a root mean square error equal to 26.00 Mg/ha using NDVI62 and VCF as explanatory variables.Validation correlation coefficients were similar for both models:lin-ear(r = 0.87**) and nonlinear(r = 0.86**).     

Advanced interpretation of interferometric SAR data to detect,monitor and model ground subsidence: outcomes from the ESA-GMES Terrafirma project

Land subsidence is a common natural hazard striking extensive areas worldwide, with severe impacts on economy and environment. Subsidence has been recognized as one of geohazards needing research efforts and knowledge transfer at international level, especially when urban fabrics and infrastructures are directly involved in the land settling. Policies and solutions for land subsidence management can be different. Despite this variability, where mitigation methods need to be adopted, mapping, monitoring and simulation of subsidence have to precede their design and implementation. In this framework, Earth Observation (EO) and remote sensing have a major role to play. Satellite Synthetic Aperture Radar Interferometry, thanks to its wide spatial coverage and its millimeter accuracy, provides a valuable contribution in the management of hazard posed by subsidence-related deformation. The ESA-GMES Terrafirma project (2003–2014) has worked for the promotion of the persistent scatterer interferometry, a family of techniques ideally suited for the assessment of magnitude of surface deformations associated with subsidence phenomena. Within the Terrafirma Project a series of products, based on the integration of EO technologies and in situ data, has been established and delivered to a wide community of end user. Three case studies, outcomes of the Terrafirma project, are presented: the wide area of Rome (Italy), the Anthemountas basin and the Kalochori village (Greece). These case studies have been selected with the purpose of showing the essential contribution of interferometric data during the main activities that must be covered when dealing with geohazard investigations (i.e., mapping, monitoring and modeling). These three case studies are meant to be representative of the suite of services delivered by the Terrafirma project to specific end users with the legal mandated to manage the geohazard.     

Determination of the onset dates of the rainy season in central Amazon with equatorially antisymmetric outgoing longwave radiation

The present work provides a new methodology to determine onset dates of the rainy season (ONR) in central Amazon (CAM) using the antisymmetric in relation to the equator outgoing longwave radiation (OLR) (AOLR) data, for the 1979–2006 period. Spatial averages of the AOLR ( $\overline {AOLR} $ ) over the CAM for the ONR periods are obtained. These periods correspond to 25 pentads centered on the mean pentad for the ONR. The sign changes from positive to negative of the $\overline {AOLR} $ for the ONR periods indicate the transition from dry to wet season. Composites of several variables are done for pentads before and after the ONR dates. These composites show physically consistent features. The potential of the $\overline {AOLR} $ time series as an index for monitoring tasks is analyzed. The results here show that the $\overline {AOLR} $ for the ONR period captures the transition from dry to wet conditions in the CAM area during 2006. The advantages of this method are discussed. The new simple method proposed here seems to be efficient in determining the ONR in the CAM.     

Crystal clots,amphibole fractionation and the evolution of calc-alkaline magmas

Petrographic and microprobe investigations of calc-alkaline (CA) rocks from the High Cascade Range (i.e., Mt. St. Helens, Mt. Jefferson, Crater Lake and Mt. Shasta) of western North America show that crystal clots represent primary igneous phase assemblages and are not products of amphibole reactions with melt. For each eruptive complex, crystal clots display diverse modal proportions even within a single eruptive unit. Nevertheless, in all cases the crystal-clot minerals are also represented in the rock as phenocrysts or microphenocrysts. Basalts contain clots of ol+plag+mgt, ol+mgt, cpx+ plag+mgt, cpx+mgt and plag+mgt; andesites, clots of cpx+mgt, opx+mgt, cpx+opx+plag+mgt, cpx+plag+mgt, opx+plag+mgt and plag±mgt; and dacites, clots of opx+mgt, cpx+opx+plag+ mgt, opx+plag+mgt, amph+plag+mgt±ilm, amph+mgt±ilm and plag±mgt. The bulk compositions of most of these clot assemblages could not have been derived from amphibole percursors. Although some amphiboles in dacitic rocks display a breakdown reaction of amph=plag+cpx+opx +mag, these mineral clusters, unlike those of clots, typically have a relict amphibole crystal outline and a fine-grained metamorphic texture. Plagioclase grains in the mineral clusters lack oscillatory zoning which is typical of crystal clot plagioclase grains. The euhedral to subhedral shapes of most clot minerals and the oscillatory zoning present in most clot plagioclase grains are not likely to have formed from the breakdown of amphibole. Crystal clots are also observed in Hawaiian and ocean floor basalts, although amphibole fractionation has not been proposed for those lavas. Magnetite fractionation may be the controlling process limiting iron enrichment in CA magmas rather than amphibole fractionation. Textural evidence indicates that magnetite is an early-forming phase in CA magmas. V, which is concentrated in magnetite, shows a strong decrease with increasing silica in many CA rocks, supporting a magnetite fractionation model.Hawaii Institute of Geophysics Contrib. No. 969     

Geostatistical estimation of chemical contamination in stream sediments: The case study of Vale das Gatas mine (northern Portugal)

Based on an environmental geochemistry case study carried out in the neighbourhood of a W–Sn abandoned mine, the pollution in stream sediments was modelled through a Global Contamination Index. Such an index permits one to summarize the combination of deleterious elements in a single variable, obtained by the projection of samples onto the first axis of a PCASD (Principal Components Analysis of Standardized Data) applied to the entire n × p matrix containing the available concentrations of p = 16 elements in the set of n = 220 collected samples.In order to provide a sound basis for a coherent planning of the remediation process which will be put in operation in the affected area, it is necessary to balance the costs of reclaiming with the probabilities of exceeding the upper limits accepted for concentrations of environmentally harmful elements in sediments. Given these limits, they are back-transformed in the index values, providing a practical threshold between ‘clean’ and ‘contaminated’ samples. On the other hand, the minimum dimension of the cell to be reclaimed is restrained by the selected remediation process to be applied in the affected area. Hence, to meet the constraints of such a remediation process, it is required to estimate the probabilities of exceeding the index threshold in technologically meaningful sub-areas. For this end, the Indicator Block Kriging technique was applied, producing a series of maps where sub-areas to be reclaimed can be spotted for different probability levels. These maps, on which the decision making remediation agency can rely for its cost-benefit analysis, take into account both the spatial structure of ‘clean’ vs. ‘contaminated’ samples and the constraints of the reclaiming process.