Arsenic and antimony in geothermal waters of Yellowstone National Park,Wyoming, USA

A total of 268 thermal spring samples were analyzed for total soluble As using reduced molybdenum-blue; 27 of these samples were also analyzed for total Sb using flame atomic absorption spectrometry. At Yellowstone the $\text{Cl}\text{As}$ atomic ratio is nearly constant among neutral-alkaline springs with Cl > 100 mg L^?1, and within restricted geographic areas, indicating no differential effects of adiabatic vs. conductive cooling on arsenic. The $\text{Cl}\text{As}$ ratio increases with silica and decreases with decreasing $\text{Cl}\text{ΣCO}{}_3$; the latter relationship is best exemplified for springs along the extensively sampled SE-NW trend within the Lone Star-Upper-Midway Basin region. The relationship between $\text{Cl}\text{As}$ and $\text{Cl}\text{ΣCO}{}_3$ at Yellowstone suggests a possible rock leaching rather than magmatic origin for much of the Park's total As flux. Condensed vapor springs are low in both As and Cl. Very high $\text{Cl}\text{As}$ ratios ( > 1000) are associated exclusively with highly diluted (Cl < 100 mg L^?1) mixed springs in the Norris and Shoshone Basins and in the Upper White Creek and Firehole Lake areas of Lower Basin. The high ratios are associated with acidity and/or oxygen and iron; they indicate precipitation of As following massive dilution of the Asbearing high-Cl parent water.Yellowstone Sb ranged from 0.009 at Mammoth to 0.166 mg L^?1 at Joseph's Coat Spring. Within basins, the $\text{Cl}\text{Sb}$ ratio increases as the $\text{Cl}\text{ΣCO}{}_3$ ratio decreases, in marked contrast to As. Mixed springs also have elevated $\text{Cl}\text{Sb}$ ratios. White (1967) and Weissberg (1969) previously reported stibnite (Sb₂S₃), but not orpiment (As₂S₃), precipitating in the near surface zone of alkaline geothermal systems.     

Coarse-grained chondrule rims in type 3 chondrites

Relatively coarse-grained rims occur around all types of chondrules in type 3 carbonaceous and ordinary chondrites. Those in H-L-LL3 chondrites are composed primarily of olivine and low-Ca pyroxene; those in CV3 chondrites contain much less low-Ca pyroxene. Average grain sizes range from ～4 μm in H-L-LL3 chondrites to ～10 μm in CV3 chondrites. Such rims surround ～50%, ～10% and ≤ 1% of chondrules in CV3, H-L-LL3 and CO3 chondrites, respectively, but are rare (≤1%) around CV3 Ca,Al-rich inclusions. Rim thicknesses average ～150 μm in H-L-LL3 chondrites and ～400 μm in CV3 chondrites.The rims in H-L-LL3 chondrites are composed of material very similar to that which comprises darkzoned chondrules and recrysiallized matrix. Dark-zoned chondrules and coarse-grained rims probably formed in the solar nebula from clumps of opaque matrix material heated to sub-solidus to sub-liquidus temperatures during chondrule formation. Mechanisms capable of completely melting some material while only sintering other material require steep thermal gradients; suitable processes are lightning, reconnecting magnetic field lines and, possibly, aerodynamic drag heating.CV chondrites may have formed in a region where the chondrule formation mechanism was less efficient, probably at greater solar distances than the ordinary chondrites. The lesser efficiency of heating could be responsible for the greater abundance of coarse-grained rims around CV chondrules. Alternatively, CV chondrules may have suffered fewer particle collisions prior to agglomeration.     

The Transiometer: An Alternative Method of Soil Moisture Measurement in Slowly Permeable Soils

The union of a piezoresistive pressure transducer and a porous ceramic cup was termed "transiometer." The transiometer was constructed from economical and readily available materials. It could be used to measure soil water potentials in both saturated and unsaturated conditions, and was well suited to continuous monitoring with data acquisition equipment.
Transiometer testing was conducted at two sites, one of moderate permeability and the other of slow permeability. The slowly permeable site was instrumented with four replications of the following: (1) transiometers installed at four depths, (2) a transi-ometerwithout the ceramic cup, (3) apiezometer, and (4) access tubes for monitoring soil moisture with a neutron probe. The moderately permeable site was instrumented with a transiometer, two piezometers, and an access tube for monitoring with a neutron probe.
In saturated conditions the transiometer had a faster response time after installation than the piezometer. Faster response makes the transiometer more desirable for use in slowly permeable soils, especially when monitoring dynamic soil water.
Calculated random error of the transiometer measuring system, including a digital voltmeter and a scanner, was typically 0.09 feet (2.8cm), with a maximum calculated to be 0.38 feet (11.5cm). The two most significant components were imprecision of the scanner card and calibration shift. The transiometer was sensitive to atmospheric pressure fluctuations, with sensitivity to atmospheric pressure change increasing with installation depth.     

A review on stochastic differential equations for applications in hydrology

Fundamentals of the theory of stochastic calculus and stochastic differential equations (SDE's) which are finding increasing application in water resources engineering are reviewed. The basics of probability theory, mean square calculus and the Wiener, white Gaussian and compound Poisson processes are given in preparation for a discussion of the general Itô SDE with drift, diffusion and jump discontinuity terms driven by Gaussian white noise and compound Poissionian impulses. Also discussed are stochastic integration and the derivation of moment equations via the Itô differential rule. The lierature of SDE's is reviewed with an emphasis on the more accessible sources.     

A Ce/Nd isotope study of crustal contamination processes affecting Palaeocene magmas in Skye,Northwest Scotland

Twelve¹³⁸Ce/¹³⁶Ce isotope determinations, 31 Nd isotope analyses, and 31 REE profiles are presented for Tertiary basic to intermediate igneous rocks from the Isle of Skye, NW Scotland. The aim of this work is to precisely identify the contamination mechanisms of basic magmas emplaced through old crust, and to test the effectiveness of Ce isotope analysis as a petrogenetic tool.Combined Ce/Nd isotope analysis enables the modelling of the light REE profiles of the mantle-derived precursors to contaminated lavas, using different crustal end-members, in order to compare these with the magmatic lineage of uncontaminated Skye lavas. The geochemical data support a contamination mechanism involving a granitic melt, produced either by large degree melting of Scourian granulitefacies acid sheets, or (possibly) by melting of intermediate gneiss out of isotopic equilibrium.Basaltic lavas showing strong isotopic contamination effects yield calculated degrees of crustal contamination by large degree granitic melts of ca. 8 or 9% based on Ce and Nd isotopic data respectively. However, for lavas with liquidus temperatures of over 1250° C, the temperature dependence of the degree of contamination is weak.The combination of this evidence with new and published Pb isotope data suggests that the bulk of crustal contamination of the Skye lavas occurred in sill complexes at distinct levels in the crust, rather than during the actual ascent of magma through the crust in dykes. It is suggested on the basis of published fluid dynamic and field evidence that the assimilation of large degree melts of acid gneiss by turbulently flowing magma is more likely than assimilation of small degree disequilibrium melts from more refractory intermediate gneisses.It is concluded that Ce isotope analysis is a viable and useful adjunct to Nd isotope data in petrogenetic studies of continental igneous rocks emplaced through old basement.