The neotectonics and geodynamics of the Lower Oka Region (East European Craton)

The neotectonic structures of the Lower Oka (Nizhneokskii) Region formed under different geodynamic conditions. This is attested by the morphology, orientation, internal structure, and jointing of the structures. The Oka-Tsna arc formed under the effect of tension from an inner source on the one hand and stress from the Alpian belt on the other hand. The latitudinally-oriented structures of the northwestern slope of the Tokmovo arc emerged as a result of uplift and widening. Both types of structure are combined within the limits of the Oka-Murom trough, which is a geodynamically active zone.     

Observational study of the seasonality of the submonthly and intraseasonal signal over the tropics

Summary Atmospheric variability in outgoing long-wave radiation (OLR) and tropospheric relative vorticity (VOR) over the South American region was studied from 1979 to 1996 using the complex Morlet wavelet function. The analyses focus on spatial variation in intraseasonal and submonthly scales. Scalograms were used to measure submonthly intraseasonal oscillations in convection, which were found to be predominant in the tropical regions. However, 7-day and 15-day oscillations were observed at tropical and extratropical latitudes in spring and winter, indicating that transient disturbances play a more prominent role. Regarding VOR, tropical energy intensities were highest in the spring and summer, whereas subtropical and extratropical energy intensities were highest in the autumn and winter. The dynamics of the 25-day and 45-day VOR oscillations indicates a possible correlation with Rossby waves over the eastern tropical Pacific Ocean, mainly during the summer. During winter, the 7-day and 15-day VOR oscillations are more frequent at higher latitudes and are enhanced along storm tracks. It was also observed that convection amplitudes in the regions of maximum intensity change appreciably from year to year and from season to season, showing that the behavior of the submonthly and intraseasonal oscillations is nonperiodic and correlates strongly with El Ni?o/Southern Oscillation years. These results confirm the efficiency of wavelet analysis for time-scale studies of atmospheric variability.     

Sedimentological analysis of two drill cores through the crater moat‐filling breccia,Flynn Creek impact structure,Tennessee

Sedimentological (line‐logging) analysis of two drill cores, FC77‐3 and FC67‐3, situated, respectively, in the northwestern and southeastern quadrants of the Flynn Creek impact structure's crater‐moat area reveals that the ~27 m thick crater moat‐filling breccia consists of three subequal parts. These parts, which were deposited during early modification stage of this marine‐target impact structure, are distinguished on the basis of vertical trends in sorting, grain size, and counts of clasts per meter in comparison with other well‐known marine‐target impact structures, namely Lockne, Tvären, and Chesapeake Bay. The lower part is interpreted to represent mainly slump deposits, and the middle part is interpreted to represent a stage intermediate between slump and marine resurge, that is, a traction flow driven by overriding suspension flow. The upper part (size graded, and relatively well sorted and fine grained) is interpreted to represent marine resurge flow only. The upper part is capped by a relatively thin and relatively fine‐grained calcarenite to calcisiltite deposit.     

Star counts in M15 onU,B andV plates

We present new counts of stars in M15, using plates inB, V andU. We are able to explore relatively close to the central parts of the cluster (0.1 pc) and we derive the best fitting parameters for the star distribution.     

An inter-comparison of tidal solutions computed with a range of unstructured grid models of the Irish and Celtic Sea Regions

Three finite element codes, namely TELEMAC, ADCIRC and QUODDY, are used to compute the spatial distributions of the M₂, M₄ and M₆ components of the tide in the sea region off the west coast of Britain. This region is chosen because there is an accurate topographic dataset in the area and detailed open boundary M₂ tidal forcing for driving the model. In addition, accurate solutions (based upon comparisons with extensive observations) using uniform grid finite difference models forced with these open boundary data exist for comparison purposes. By using boundary forcing, bottom topography and bottom drag coefficients identical to those used in an earlier finite difference model, there is no danger of comparing finite element solutions for “untuned unoptimised solutions” with those from a “tuned optimised solution”. In addition, by placing the open boundary in all finite element calculations at the same location as that used in a previous finite difference model and using the same M₂ tidal boundary forcing and water depths, a like with like comparison of solutions derived with the various finite element models was possible. In addition, this open boundary was well removed from the shallow water region, namely the eastern Irish Sea where the higher harmonics were generated. Since these are not included in the open boundary, forcing their generation was determined by physical processes within the models. Consequently, an inter-comparison of these higher harmonics generated by the various finite element codes gives some indication of the degree of variability in the solution particularly in coastal regions from one finite element model to another. Initial calculations using high-resolution near-shore topography in the eastern Irish Sea and including “wetting and drying” showed that M₂ tidal amplitudes and phases in the region computed with TELEMAC were in good agreement with observations. The ADCIRC code gave amplitudes about 30 cm lower and phases about 8° higher. For the M₄ tide, in the eastern Irish Sea amplitudes computed with TELEMAC were about 4 cm higher than ADCIRC on average, with phase differences of order 5°. For the M₆ component, amplitudes and phases showed significant small-scale variability in the eastern Irish Sea, and no clear bias between the models could be found. Although setting a minimum water depth of 5 m in the near-shore region, hence removing wetting and drying, reduced the small-scale variability in the models, the differences in M₂ and M₄ tide between models remained. For M₆, a significant reduction in variability occurred in the eastern Irish Sea when a minimum 5-m water depth was specified. In this case, TELEMAC gave amplitudes that were 1 cm higher and phases 30° lower than ADCIRC on average. For QUODDY in the eastern Irish Sea, average M₂ tidal amplitudes were about 10 cm higher and phase 8° higher than those computed with TELEMAC. For M₄, amplitudes were approximately 2 cm higher with phases of order 15° higher in the northern part of the region and 15° lower in the southern part. For M₆ in the north of the region, amplitudes were 2 cm higher and about 2 cm lower in the south. Very rapid M₆ tidal-phase changes occurred in the near-shore regions. The lessons learned from this model inter-comparison study are summarised in the final section of the paper. In addition, the problems of performing a detailed model–model inter-comparison are discussed, as are the enormous difficulties of conducting a true model skill assessment that would require detailed measurements of tidal boundary forcing, near-shore topography and precise knowledge of bed types and bed forms. Such data are at present not available.     

Intrusive processes at ocean ridges: Evidence from the sheeted dyke complex of Masirah, Oman

Masirah Island largely consists of a late Mesozoic ophiolite which includes extensive areas of near-vertical, ENE—WSW striking, sheeted dykes. Previously the possibility has been suggested of a correlation between the similarly-aged ophiolites of Masirah and the Semail Complex of the Oman Mts. However, the Masirah ENE–WSW trend contrasts with N—S dyke trends from the Wadi Jizi area of the Semail, possibly suggesting two unrelated spreading centres. The dykes pass up into a pillow lava—minor sediment sequence, down into both layered and unlayered gabbros and are bounded to the west by a major N—S mélange zone which may have originated as a ridge transform fault. Age relations of the dykes and the gabbros are complex: the dykes contain a variable proportion of gabbro screens representing earlier crystallization, but they are also intruded by several small gabbro bodies which are themselves cut by still later dykes. The lava and dyke—gabbro screen sequence shows evidence of metamorphism from zeolite to low amphibolite grade. This metamorphism was caused by ridge hydrothermal activity which appears to have been effective approximately to the lower levels of the dykes. The rapid passage from low-amphibolite dykes to fresh gabbro suggests lithological control of the metamorphism. A combination of structural, geochemical and mineral phase studies may indicate generation in a slow spreading ridge environment and near-ridge metamorphism caused by a geothermal gradient of approximately 200°C/km.     

A mass ratio limit for primordial black holes

We augment our scenario for the formation of astronomical objects from macroscopic superstrings by the assumption that the central matter keeps its identity in the fragmentation. From the condition that the angular momentum per mass squared of this matter should be less than the Kerr limit G/c, we obtain upper limits for the ratio of the mass of central black holes M(BH) to the mass M of the host object. This limit is M(BH)/M ≈ 0.001, and, expressed in observed quantities, approximately M(BH)/M ≈ σ²/(v · c) where σ is the r.m.s. velocity, v the rotational velocity and c the velocity of light. The valuesM(BH) agree with the observed behaviour both in order of magnitude and in the variation with velocity dispersion. (© 2003 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Observations of OH maser lines at an 18-cm wavelength in 9P/Temper1 and Lulin C/2007 N3 comets with RT-22 at the Crimean Astrophysical Observatory

Investigations on OH maser lines in comets have been performed with the RT-22 at CrAO. The results of observations of 9P/Temper1 and Lulin C/2007 N3 comets in the OH molecule line at a wavelength of 18 cm are presented. An original technique for observation data analysis has been developed. The gas production rate of OH molecules in these comets is estimated.     

Rock salt mass in the Paleoproterozoic sequence of the Onega trough in Karelia (from the Onega parametric well data)

A thick (200 m) rock salt mass covering Late Archean granitoids was exposed for the first time in the Early Proterozoic volcanogenic-sedimentary formations in the Onega trough of the east Baltic Shield by the Onega parametric well. The mineral composition of salts, their geochemical features, and the isotopic composition of carbonate carbon and oxygen have been studied. After fluid inclusions present in salts, their metamorphism temperature and isotopic composition of helium and argon were determined. The obtained results give evidence of the fact that rock salts and magnesites associated with them were formed in an evaporate basin with participation of deep crustal processes. The age of the underlying granitoids (2.716 ± 9 Ma) is determined using the Pb—Pb method.     

The Karoo Basin of South Africa: type basin for the coal-bearing deposits of southern Africa

The coal-bearing sediments and coal seams of the Karoo Basin, Southern Africa are described and discussed. The Karoo Basin is bounded on its southern margin by the Cape Fold Belt, onlaps onto the Kaapvaal Craton in the north and is classified as a foreland basin. Coal seams are present within the Early Permian Vryheid Formation and the Triassic Molteno Formation.The peats of the Vryheid Formation accumulated within swamps in a cool temperate climatic regime. Lower and upper delta plain, back-barrier and fluvial environments were associated with peat formation. Thick, laterally extensive coal seams have preferentially accumulated in fluvial environments. The coals are in general inertinite-rich and high in ash. However, increasing vitrinite and decreasing ash contents within seams occur from west to east across the coalfields. The Triassic Molteno coal seams accumulated with aerially restricted swamps in fluvial environments. These Molteno coals are thin, laterally impersistent, vitrinite-rich and shaly, and formed under a warm temperate climatic regime.Palaeoclimate, depositional systems, differential subsidence and basin tectonics influence to varying degrees, the maceral content, thickness and lateral extent of coal seams. However, the geographic position of peat-forming swamps within a foreland basin, coupled with basin tectonics and differential subsidence are envisaged as the primary controls on coal parameters. The Permian coals are situated in proximal positions on the passive margin of the foreland basin. Here, subsidence was limited which enhanced oxidation of organic matter and hence the formation of inertinitic coals. The coals in this tectonic setting are thick and laterally extensive. The Triassci coals are situated within the tectonically active foreland basin margin. Rapid subsidence and sedimentation rates occurred during peat formation which resulted in the preservation of thin, laterally impersistent, high ash, vitrinite-rich, shaly coals.