Emerald mineralisation in Colombia: fluid chemistry and the role of brine mixing

Emerald mineralisation in Colombia is located in two distinct zones along the borders of the Eastern Cordillera, some 80 km apart. Mineralisation in the western zone has been dated at ca. 35 Ma whereas in the eastern zone it is 30 Ma older. Crush leach analysis of the electrolyte chemistry of fluid inclusions contained in emerald, quartz, calcite, dolomite and fluorite from both zones, demonstrates that in each region brines associated with emerald mineralisation range between two extremes with many samples yielding intermediate compositions. Fluid 1, found mainly in emerald-hosted fluid inclusions, is dominated by NaCl with high Cl:Br ratios indicating that the salinity was derived by dissolution of halite, most probably from the local salt beds. Fluid 2, found notably in quartz hosted-fluid inclusions, is of similar salinity but contains less Na and significant concentrations of Ca–K–Fe–Cl and other cations. It has lower Cl:Br ratios, more comparable with formation waters, but is inferred to have obtained part of its salinity by halite dissolution. Bivariate plots of almost all cations have linear or sublinear trends regardless of the mineral hosting the inclusions or the locality from which the samples originated, demonstrating that mixing of the two saline fluids has occurred. Because the same two fluids occur in both eastern and western zones, despite the difference in space and time, it is inferred that fluid compositions were rock controlled by similar interactions with evaporites and black shales in both instances. It is proposed that beryllium was transported as Be–F complexes in the NaCl-fluid, and was precipitated as emerald after mixing with the calcic brine caused precipitation of fluorite and parisite. Received: 9 April 1999 / Accepted: 14 March 2000     

Upper mantle structure of the South American continent and neighboring oceans from surface wave tomography

We present a new three-dimensional SV-wave velocity model for the upper mantle beneath South America and the surrounding oceans, built from the waveform inversion of 5850 Rayleigh wave seismograms. The dense path coverage and the use of higher modes to supplement the fundamental mode of surface waves allow us to constrain seismic heterogeneities with horizontal wavelengths of a few hundred kilometres in the uppermost 400 km of the mantle.The large scale features of our tomographic model confirm previous results from global and regional tomographic studies (e.g. the depth extent of the high velocity cratonic roots down to about 200–250 km).Several new features are highlighted in our model. Down to 100 km depth, the high velocity lid beneath the Amazonian craton is separated in two parts associated with the Guyana and Guapore shields, suggesting that the rifting episode responsible for the formation of the Amazon basin has involved a significant part of the lithosphere. Along the Andean subduction belt, the structure of the high velocity anomaly associated with the sudbduction of the Nazca plate beneath the South American plate reflects the along-strike variation in dip of the subducting plate. Slow velocities are observed down to about 100 km and 150 km at the intersection of the Carnegie and Chile ridges with the continent and are likely to represent the thermal anomalies associated with the subducted ridges. These lowered velocities might correspond to zones of weakness in the subducted plate and may have led to the formation of “slab windows” developed through unzipping of the subducted ridges; these windows might accommodate a transfer of asthenospheric mantle from the Pacific to the Atlantic ocean. From 150 to 250 km depth, the subducting Nazca plate is associated with high seismic velocities between 5°S and 37°S. We find high seismic velocities beneath the Paraná basin down to about 200 km depth, underlain by a low velocity anomaly in the depth range 200–400 km located beneath the Ponta Grossa arc at the southern tip of the basin. This high velocity anomaly is located southward of a narrow S-wave low velocity structure observed between 200 and 500–600 km depth in body wave studies, but irresolvable with our long period datasets. Both anomalies point to a model in which several, possibly diachronous, plumes have risen to the surface to generate the Paraná large igneous province (LIP).     

Critical Review of the Hypervib1 Model to Assess Pile Vibro-Drivability

The vibratory driving technique is used for driving piles, sheet piles, tubes and rods into the ground by imparting to the element a longitudinal periodic motion. The small amplitude vibrations induced by the equipment reduce the ground resistance which allows penetration under the action of a relatively small axial force. The technique offers an alternative to impact driving due to lower installation costs and reduced environmental disturbance (noise, vibration, etc.) especially in sensitive environments, such as industrial and urban sites or offshore wind farm sites. The vibratory technique is also preferred when the maximum stress levels imparted to the driven element are of concern. Despite the advantages of the vibratory driving technique, its application remains however mainly driven by pragmatic aspects. Within that context, the access to experience databases and full-scale field test results is of valuable interest. The aim of this paper is to review the Hypervib1 model developed by (Holeyman 1993) for assessing the vibratory drivability of piles and sheet piles, based on the analysis of such experimental results. New findings and developments brought to the model are discussed. Conclusions in terms of reliability of the method are finally drawn.     

Late Cenozoic transpressional ductile deformation north of the Nazca–South America–Antarctica triple junction

The southern Andes plate boundary zone records a protracted history of bulk transpressional deformation during the Cenozoic, which has been causally related to either oblique subduction or ridge collision. However, few structural and chronological studies of regional deformation are available to support one hypothesis or the other. We address along- and across-strike variations in the nature and timing of plate boundary deformation to better understand the Cenozoic tectonics of the southern Andes.Two east–west structural transects were mapped at Puyuhuapi and Aysén, immediately north of the Nazca–South America–Antarctica triple junction. At Puyuhuapi (44°S), north–south striking, high-angle contractional and strike-slip ductile shear zones developed from plutons coexist with moderately dipping dextral-oblique shear zones in the wallrocks. In Aysén (45–46°), top to the southwest, oblique thrusting predominates to the west of the Cenozoic magmatic arc, whereas dextral strike-slip shear zones develop within it.New ⁴⁰Ar–³⁹Ar data from mylonites and undeformed rocks from the two transects suggest that dextral strike-slip, oblique-slip and contractional deformation occurred at nearly the same time but within different structural domains along and across the orogen. Similar ages were obtained on both high strain pelitic schists with dextral strike-slip kinematics (4.4±0.3 Ma, laser on muscovite–biotite aggregates, Aysén transect, 45°S) and on mylonitic plutonic rocks with contractional deformation (3.8±0.2 to 4.2±0.2 Ma, fine-grained, recrystallized biotite, Puyuhuapi transect). Oblique-slip, dextral reverse kinematics of uncertain age is documented at the Canal Costa shear zone (45°S) and at the Queulat shear zone at 44°S. Published dates for the undeformed protholiths suggest both shear zones are likely Late Miocene or Pliocene, coeval with contractional and strike-slip shear zones farther north. Coeval strike-slip, oblique-slip and contractional deformation on ductile shear zones of the southern Andes suggest different degrees of along- and across-strike deformation partitioning of bulk transpressional deformation.The long-term dextral transpressional regime appears to be driven by oblique subduction. The short-term deformation is in turn controlled by ridge collision from 6 Ma to present day. This is indicated by most deformation ages and by a southward increase in the contractional component of deformation. Oblique-slip to contractional shear zones at both western and eastern margins of the Miocene belt of the Patagonian batholith define a large-scale pop-up structure by which deeper levels of the crust have been differentially exhumed since the Pliocene at a rate in excess of 1.7 mm/year.     

Caractérisation des chapeaux de fer en milieu latéritique cuirassé

The main discrimination criteria between the gossans and ferruginous laterites are the iron secondary minerals, well known as direct crystallization after weathering of the main sulphide minerals. The characteristics of these iron oxihydroxides and their association in supergene rocks affect all the physical, mineralogical, geochemical, and crystal-chemical aspects: morphology, facies, microfacies, mineralogical constitution, geochemical composition and iron oxide/hydroxide crystal chemistry give thus distinction criteria. In West Africa, where lateritic iron crusts are abundant, the research of the above characteristics could be an alternative method to the classical blind-soil and alluvial-sediment geochemical prospecting. To cite this article: A. Blot, C. R. Geoscience 336 (2004).     

Difference in petrophysical properties between foliated and dilatant fault rocks in deeply buried clastics: The case of the Grès d'Annot Formation,SW French Alps

This study describes normal fault zones formed in foreland arkosic turbidites (the Grès d'Annot Formation, SW French Alps) under deep diagenesis conditions (~200 °C) and highlights the occurrence of two markedly different fault‐rock types: (1) the foliated fault rocks of the Moutière‐Restefond area; and (2) the dilatant fault rocks of the Estrop area. The deformation of (1) is dominated by intra‐ and transgranular fracturing, pressure solution of quartz and feldspar grains and syn‐kinematic phyllosilicate precipitation resulting from feldspar alteration. The combination of these mechanisms results in a strongly anisotropic strain with intense shortening normal to the foliation (pressure solution) and extension parallel to the foliation (quartz‐ and calcite‐sealed extension veins). This deformation implies local mass transfer that may be achieved without (or with limited) volume change. The deformation of (2) is expressed as dilatant quartz‐sealed veins and breccia textures in which the main mechanisms are transgranular fracturing and quartz precipitation. Type (2) implies fault volume increase, isotropy of deformation and mass transfer at distances larger than in type (1). This study discusses the origins of (1) and (2) and shows that the permeability of (1) is anisotropic, with higher values than the host rocks parallel to the Y main deformation axis (i.e. perpendicular to the slip vector), whereas the permeability of (2) is isotropic and equivalent to that of the host rocks.     

Environmental impact of an urban landfill on a coastal aquifer (El Jadida, Morocco)

The El Jadida landfill is one among many uncontrolled dumping sites in Morocco with no bottom liner. About 150 tons/day of solid wastes from mixed urban and industrial origins are placed directly on the ground. At the site of this landfill, the groundwaters circulate deeply (10–15 m) in the Cenomanian rock (calcareous–marl), which is characterised by an important permeability from cracks. The soil is sand–clay characterized by a weak coefficient of retention.The phreatic water ascends to the bottom of three quarries, which are located within the landfill. These circumstances, along with the lack of a leachate collection system, worsen the risks for a potential deterioration of the aquifer.To evaluate groundwater pollution due to this urban landfill, piezometric level and geochemical analyses have been monitored since 1999 on 60 wells. The landfill leachate has been collected from the three quarries that are located within the landfill. The average results of geochemical analyses show an important polluant charge vehiculed by landfill leachate (chloride = 5680 mg l⁻¹, chemical oxygen demand = 1000 mg l⁻¹, iron = 23 000 μg l⁻¹). They show also an important qualitative degradation of the groundwater, especially in the parts situated in the down gradient area and in direct proximity to the landfill. In these polluted zones, we have observed the following values: higher than 4.5 mS cm⁻¹ in electric conductivity, 1620 and 1000 mg l⁻¹ respectively in chlorides and sulfate (), 15–25 μg l⁻¹ in cadmium, and 60–100 μg l⁻¹ in chromium. These concentrations widely exceed the standard values for potable water.Several determining factors in the evolution of groundwater contamination have been highlighted, such as (1) depth of the water table, (2) permeability of soil and unsaturated zone, (3) effective infiltration, (4) humidity and (5) absence of a system for leachate drainage. So, to reduce the pollution risks of the groundwater, it is necessary to set a system of collection, drainage and treatment of landfill leachates and to emplace an impermeable surface at the site of landfill, in order to limit the infiltration of leachate.     

Vertical velocity field in the convective boundary layer as observed with an acoustic Doppler sodar

The morning development of the daytime convective boundary layer (CBL) during fine weather has been observed with an acoustic Doppler sodar of the C.R.P.E. In particular, the vertical profile of the vertical velocity third-order statistic W* ³ has been obtained. This quantity is a maximum near 0.3z _I where z _I, is the height of the CBL. The histogram of vertical velocity in the CBL shows a relationship between W ³ and the convective velocity W _* and is useful for convective plume determination.