Continuous measurement of whole‐tree water balance for studying urban tree transpiration

Street and garden trees in urban areas are often exposed to advection of strong vapour pressure deficit (VPD) air that can raise the whole‐tree transpiration rate (E_T), known as the oasis effect. However, urban trees tend to have small soil volume compared with natural conditions, and so they are believed to strongly regulate stomata. E_T characteristics of such urban trees have not been well understood because of a lack of reliable measurement methods. Therefore, we propose a novel weighing lysimeter method and investigate the whole‐tree water balance of an isolated container‐grown Zelkova serrata to examine (a) which biotic and abiotic factors determine E_T and (b) which spatial and temporal information is needed to predict E_T under urban conditions. Whole‐tree water balance and environmental conditions were measured from 2010 to 2012. Although leaf area substantially increased in the study period, daily E_T did not vary much. E_T increased with VPD almost linearly in 2010 but showed saturation in 2011 and 2012. Root water uptake lagged E_T by 40 min in 2012. These results suggest that the small planter box interfered with root growth and that hydraulic supply capacities did not increase sufficiently to support leaf area increase. From analysis of water balance, we believe that neglecting soil drought effects on street trees without irrigation in Japan will overestimate E_T over 4–5 sunny days at the longest. This is unlike previous studies of forest.     

The use of sintered diamond anvils in the MA8 type high-pressure apparatus

A new multi-anvil type high-presure apparatus has been developed using sintered diamond anvils to generate pressures over 30 GPa and temperatures up to about 2000°C. A maximum sample volume of about 1 mm³ is available in this system. The pressure was confirmed by dissociation of forsterite into Mg-perovskite and periclase. The basic techniques and problems in utilizing sintered diamond in the MA8 type high-pressure apparatus are discussed with an emphasis on the future prospect of incorporating simultancous X-ray diffraction observation.     

Finite element analysis and experimental verification of the scrap tire rubber pad isolator

A new base isolation system using scrap tire rubber pads (STRP) has been introduced for seismic mitigation of ordinary residential buildings. The rubber and the steel reinforcing cords used in manufacturing the tire are the alternative materials of the proposed base isolation system. The steel reinforcing cords represent the steel plates used in conventional laminated rubber bearings. These steel reinforcing cords shall prevent the lateral bulging of the rubber bearing. The proposed base isolation system has no bonding between the superstructure and the foundation beam which allows for rollover deformation. In the first part of the study, the STRP layers were just stacked one on top of another without applying the adhesive. This paper presents loading test as well as finite element analysis (FE analysis) of strip STRP isolators that are subjected to any given combination of static vertical and lateral loads. The results of the static vertical and horizontal loading test conducted on STRP isolators were used to calculate the mechanical properties of the isolators, including stiffness and damping values. The load–displacement relationship of STRP isolators were compared between experimental and FE analysis results and the results were found to be in close agreement. The stress state within the STRP isolators was also analyzed in order to estimate the maximum stress demand in the rubber and steel reinforcing cords. These STRP isolators have several advantages over conventional laminated rubber bearings including superior damping properties, lower incurred cost, light weight and easily available material. This study suggests that using the STRP as low cost base isolation device for ordinary residential buildings is feasible.     

Performance of the complete travel-time equation of state at simultaneous high pressure and temperature

The complete travel-time equation of state (CT-EOS) is presented by utilizing thermodynamics relations, such as; $$K_T = K_S (1 + \alpha \gamma T)^{ - 1} , \gamma = \frac{{\alpha K_S }}{{\rho C_P }}, \left. {\frac{{\partial C_P }}{{\partial P}}} \right)_T = - \frac{T}{\rho }\left[ {\alpha ^2 + \left. {\frac{{\partial \alpha }}{{\partial T}}} \right)_P } \right], etc.$$ The CT-EOS enables us to analyze ultrasonic experimental data under simultaneous high pressure and high temperature without introducing any assumption, as long as the density, or thermal expansivity, and heat capacity are also available as functions of temperature at zero pressure. The performance of the CT-EOS was examined by using synthesized travel-time data with random noise of 10^?5 and 10^?4 amplitude up to 4 GPa and 1500 K. Those test conditions are to be met with the newly developed GHz interferometry in a gas medium piston cylinder apparatus. The results suggest that the combination of the CT-EOS and accurate experimental data (10^?4 in travel time) can determine thermodynamic and elastic parameters, as well as their derivatives with unprecedented accuracy, yielding second-order pressure derivatives (?² M/?P ²) of the elastic moduli as well as the temperature derivatives of their first-order pressure derivatives ?² M/?P?T). The completeness of the CT-EOS provides an unambiguous criterion to evaluate the compatibility of empirical EOS with experimental data. Furthermore because of this completeness, it offers the possibility of a new and absolute pressure calibration when X-ray (i.e., volume) measurements are made simultaneously with the travel-time measurements.     

Dendritic cordierite in argillaceous hornfels from the Toki area,Gifu Prefecture,central Japan

Dendritic cordierite occurs in argillaceous hornfels from the Toki area, Gifu Prefecture, Japan. The cordierite crystal consists of c-arms elongated parallel to the c-axes and a-arms perpendicular to the c-axis. The latter arms could be divided into six kinds of untwinned a-arms with different growth directions elongated parallel to the respective a-axis and twinned a-arms elongated parallel to the (110) twin plane. A-arms branch out from c-arms or other a-arms with different growth directions and c-arms sometimes branch out from a-arms, leading to a tree-like structure. Each of the c-arms contains three kinds of domains related by a three-fold axis about the c-axis. These domains are irregularly distributed without any relation to the shape of the c-arm and the domain boundaries are of zigzag shape. This domain arrangement suggests that c-arms grew as hexagonal cordierite and were later transformed into orthorhombic cordierite. The fact that each untwinned a-arm has a fixed growth direction to its orientation suggests that the a-arms grew as an orthorhombic cordierite. From the growth directions of c- and a-arms, orthorhombic and hexagonal phases are considered to grow preferentially along the c- and a-axes, respectively. The branching of a new arm is explained by nucleation on an old arm with a different preferred growth direction. The preferential growth is discussed in terms of a significant chemical potential gradient of the cordierite component. This has been preserved in the mineral zoning observed in the matrix around the cordierite porphyroblast.     

Double-planed deep seismic zone and anomalous structure in the upper mantle beneath northeastern Honshu (Japan)

Seismicity located by using the most recent data obtained from the high-gain seismograph network of Tohoku University shows that the deep seismic zone beneath northeastern Honshu, Japan, is composed of two thin planes which are parallel to each other and are 30–40 km apart. Focal mechanisms derived from the earthquakes in the upper plane are reverse-faulting, or, some of them, down-dip compression. As a contrast, those in the lower plane are down-dip extension. The location of the upper boundary of the descending lithospheric slab, inferred from the arrival-time difference between ScS and ScSp waves and from the travel-time anomaly of intermediate-depth earthquakes observed at the small-scale seismic array, coincides exactly with the upper plane of the double-planed deep seismic zone. Anelasticity (1/Q) structure of the upper mantle consists of three distinct zones: a high-Q (Qs− 1500) inclined lithospheric slab, an intennediate-Q (Qs−350) land-side mantle between the Pacific coast and the volcanic front, and a low-Q (Qs − 100) land-side mantle between the volcanic front and the coast of the Japan Sea.The evidence obtained here provides valuable information as to the definition of the type of mechanism producing the plate motion beneath island arcs.     

Fine‐structures of planar deformation features in shocked olivine: A comparison between Martian meteorites and experimentally shocked basalts as an indicator for shock pressure

We performed shock recovery experiments on an olivine‐phyric basalt at shock pressures of 22.2–48.5 GPa to compare with shock features in Martian meteorites (RBT 04261 and NWA 1950). Highly shocked olivine in the recovered basalt at 39.5 and 48.5 GPa shows shock‐induced planar deformation features (PDFs) composed of abundant streaks of defects. Similar PDFs were observed in olivine in RBT 04261 and NWA 1950 while those in NWA 1950 were composed of amorphous lamellae. Based on the present results and previous studies, the width and the abundance of lamellar fine‐structures increased with raising shock pressure. Therefore, these features could be used as shock pressure indicators while the estimated pressures may be lower limits due to no information of temperature dependence. For Martian meteorites that experienced heavy shocks, the minimum peak shock pressures of RBT 04261 and NWA 1950 are estimated to be 39.5–48.5 GPa and 48.5–56 GPa, respectively, which are found consistent with those estimated by postshock temperatures expected by the presence of brown olivine. We also investigated shock‐recovered basalts preheated at 750 and 800 °C in order to check the temperature effects on shock features. The results indicate a reduction in vitrifying pressure of plagioclase and a pressure increase for PDFs formation in olivine. Further temperature‐controlled shock recovery experiments will provide us better constraints to understand and to characterize various features found in natural shock events.     

Deep structure of the northeastern Japan arc and its implications for crustal deformation and shallow seismic activity

Seismic tomography studies in the northeastern Japan arc have revealed the existence of an inclined sheet-like seismic low-velocity and high-attenuation zone in the mantle wedge at depths shallower than about 150 km. This sheet-like low-velocity, high-attenuation zone is oriented sub-parallel to the subducted slab, and is considered to correspond to the upwelling flow portion of the subduction-induced convection. The low-velocity, high-attenuation zone reaches the Moho immediately beneath the volcanic front (or the Ou Backbone Range) running through the middle of the arc nearly parallel to the trench axis, which suggests that the volcanic front is formed by this hot upwelling flow. Aqueous fluids supplied by the subducted slab are probably transported upward through this upwelling flow to reach shallow levels beneath the Backbone Range where they are expelled from solidified magma and migrate further upward. The existence of aqueous fluids may weaken the surrounding crustal rocks, resulting in local contractive deformation and uplift along the Backbone Range under the compressional stress field of the volcanic arc. A strain-rate distribution map generated from GPS data reveals a notable concentration of east–west contraction along the Backbone Range, consistent with this interpretation. Shallow inland earthquakes are also concentrated in the upper crust of this locally large contraction deformation zone. Based on these observations, a simple model is proposed to explain the deformation pattern of the crust and the characteristic shallow seismic activity beneath the northeastern Japan arc.