Geology, Mineralogy, and Formation Environment of the Disseminated Gold-Silver Telluride Bulawan Deposit, Negros Occidental, Philippines

Abstract: The Bulawan deposit is located in the porphyry copper belt of southwest Negros island, Philippines. Propylitic, K–feldspar, sericitic, and carbonate alteration types can be distinguished in the deposit. Propylite alteration occurs mainly in Cretaceous-Eocene andesitic lavas and agglomerates while K–feldspar, sericite and carbonate alteration types occur mostly in the Middle Miocene dacite porphyry breccia pipes and stocks which were intruded into the andesites. K-feldspar zones occur in the inner parts of the sericitized zone. Sericite alteration overprinted the propylitized and K-feldspar alteration zones, at lower temperature than epidote and chlorite in the propylitized zone. Carbonate alteration is associated with the mineralization in the center of the breccia pipes and along faults. Mineralization consists of gold-silver telluride ores that are hosted by the carbonate– and sericite-altered dacite porphyry breccia pipes. The Bulawan ores occur mainly as disseminations, but unlike many epithermal gold deposits, lack classical epithermal colloform and crustiform quartz veins. The ore minerals are sphalerite, galena, chalcopyrite, pyrite and tetrahedite-tennantite with minor amounts of electrum, calaverite, petzite, sylvanite, hessite, tellurobismuthite, coloradoite, altaite, and rucklidgeite. Electrum and telluride minerals are associated mostly with calcite and dolomite-ankerite minerals. Fluid inclusions in quartz and calcite in clasts of propylitized andesite in the breccia pipes homogenize from about 300° to 400°C while fluid inclusions in quartz, calcite and sphalerite within the dacite porphyry breccia pipes homogenize between 300° to 310°C. The ores were formed around 300°C from hydrothermal solutions with salinity of about 6. 6 wt % NaCl equivalent. The presence of sylvanite and calaverite as intergrowths with each other, and the Ag content of calaverite are consistent with the above temperature estimate. Based on paragenesis, the Bulawan deposit formed in a pyrite-stable environment, with pH between 3. 4 and 5. 5, f_O2 between 10^-32 to 10^-30 atm, f_S2 between 10^-9.8 to 10^-7.8 atm, f_Te2 between 10^-8.9 to 10^-6.5 atm, and total sulfur content about 10^-2.8 molal. The dominant reduced sulfur species in the ore solutions may have been H₂S_(aq), and the likely aqueous tellurium species were H₂Te_(aq) and H₂TeO_3(aq). The ore minerals in the Bulawan deposit were probably formed by mixing of slightly saline and low salinity fluids.     

Double-planed deep seismic zone and anomalous structure in the upper mantle beneath northeastern Honshu (Japan)

Seismicity located by using the most recent data obtained from the high-gain seismograph network of Tohoku University shows that the deep seismic zone beneath northeastern Honshu, Japan, is composed of two thin planes which are parallel to each other and are 30–40 km apart. Focal mechanisms derived from the earthquakes in the upper plane are reverse-faulting, or, some of them, down-dip compression. As a contrast, those in the lower plane are down-dip extension. The location of the upper boundary of the descending lithospheric slab, inferred from the arrival-time difference between ScS and ScSp waves and from the travel-time anomaly of intermediate-depth earthquakes observed at the small-scale seismic array, coincides exactly with the upper plane of the double-planed deep seismic zone. Anelasticity (1/Q) structure of the upper mantle consists of three distinct zones: a high-Q (Qs− 1500) inclined lithospheric slab, an intennediate-Q (Qs−350) land-side mantle between the Pacific coast and the volcanic front, and a low-Q (Qs − 100) land-side mantle between the volcanic front and the coast of the Japan Sea.The evidence obtained here provides valuable information as to the definition of the type of mechanism producing the plate motion beneath island arcs.     

Resonance capacity method for earthquake response analysis of hysteretic structures

The Resonance Capacity Method is proposed for the earthquake response analysis of hysteretic structures. Resonance Capacity is a physical quantity of structures which is related to the hysteretic energy absorbed by structures in one cycle and is equated to the acceleration, velocity and displacement amplitudes α₀, d₀ and d₀ of earthquake ground motions at resonance.¹ According to the idealized trapezoidal approximation of earthquake ground motions in the logarithmic period–velocity plane as proposed by Veletsos and Newmark,⁸ the Resonance Capacity property applies in each period range, short, medium and long, where α₀, v₀ and d₀ respectively are approximately constant. In the medium range of periods, the energy dissipated in hysteretic loops and the deformation amplitudes of a single-degree system with elasto–plastic force–deformation relationships are calculated for the case of El Centro 1940, 18 May earthquake, by this Resonance Capacity Method. The result is compared with results from conventional numerical response analyses obtained by Berg and Thomaides,¹⁴ Kato and Akiyama¹² and Veletsos and Newmark,⁸ and the general agreement is seen to be good. Therefore, it may be possible to apply this Resonance Capacity Method over the entire range of periods. By means of this method the earthquake response analysis of hysteretic systems can be performed easily, and the hysteretic energy and fatigue characteristics of structures may be taken into account directly, up to the point of fracture.     

Under‐ice salinity and stable isotope distribution of Saroma‐ko Lagoon,Hokkaido, northern Japan

In winter, lakes and lagoons at high altitudes or high latitudes have interesting hydrological cycles that differ from those in other seasons or in other regions, because water surfaces are covered with ice. Hydrological balances of lakes and lagoons are complex dynamic systems, and to elucidate them, isotopic tracers of water have been used as effective tools along with observations of precipitation, evaporation, inflows, and outflows. Here, to understand hydrological processes during freezing periods in the brackish Saroma‐ko Lagoon, Hokkaido, northern Japan, we examined horizontal and vertical distributions of salinity and isotope compositions of lagoon water and ice in 2005 and 2006. Horizontal and vertical gradients of salinity and isotope compositions were observed from the river mouth to the sea channel, and factors determining these distributions were considered. The mixing of freshwater and seawater and a freezing effect were presumed to be factors in relationships between salinity and isotopes and in relationships between surface waters and ice just above the water. A simple box model for water balance was constructed based on these putative factors to reproduce the distributions of salinity and isotope compositions of surface waters and ice. An evaluation of the model revealed that this hydrological system is controlled primarily by horizontal advection of the epilimnion, freshwater influx, and the ice growth rate. Copyright © 2009 John Wiley & Sons, Ltd.     

Outflow Propagation in Collapsars: Collimated Jets and Expanding Outflows

We investigate the outflow propagation in the collapsar in the context of gamma-ray bursts (GRBs) with 2D relativistic hydrodynamic simulations. We vary the specific internal energy and bulk Lorentz factor of the injected outflow from non-relativistic regime to relativistic one, fixing the power of the outflow to be 10⁵¹erg s⁻¹. We observed the collimated outflow, when the Lorentz factor of the injected outflow is roughly greater than 2. To the contrary, when the velocity of the injected outflow is slower, the expanding outflow is observed. The transition from collimated jet to expanding outflow continuously occurs by decreasing the injected velocity. Different features of the dynamics of the outflows would cause the difference between the GRBs and similar phenomena, such as, X-ray flashes.     

Three‐dimensional shapes and Fe contents of Stardust impact tracks: A track formation model and estimation of comet Wild 2 coma dust particle densities

Abstract– We investigated three‐dimensional structures of comet Wild 2 coma particle impact tracks using synchrotron radiation (SR) X‐ray microtomography at SPring‐8 to elucidate the nature of comet Wild 2 coma dust particles captured in aerogel by understanding the capture process. All tracks have a similar entrance morphology, indicating a common track formation process near the entrance by impact shock propagation irrespective of impactor materials. Distributions of elements along the tracks were simultaneously measured using SR‐XRF. Iron is distributed throughout the tracks, but it tends to concentrate in the terminal grains and at the bottoms of bulbs. Based on these results, we propose an impact track formation process. We estimate the densities of cometary dust particles based on the hypothesis that the kinetic energy of impacting dust particles is proportional to the track volume. The density of 148 cometary dust particles we investigated ranges from 0.80 to 5.96 g cm^?3 with an average of 1.01 (±0.25) g cm^?3. Moreover, we suggest that less fragile crystalline particles account for approximately 5 vol% (20 wt%) of impacting particles. This value of crystalline particles corresponds to that of chondrules and CAIs, which were transported from the inner region of the solar system to the outer comet‐forming region. Our results also suggest the presence of volatile components, such as organic material and perhaps ice, in some bulbous tracks (type‐C).     

Relative chronology of crust formation on asteroid Vesta: Insights from the geochemistry of diogenites

The eucrites and diogenites are meteorites that probably originate from asteroid 4-Vesta. The upper part of the crust of this body is certainly composed of eucrites which are basaltic or gabbroic rocks. Diogenites are ultramafic cumulates whose relationships with eucritic lithologies are unknown. Here, we show that the orthopyroxenes of some diogenites display very deep negative Eu anomalies (Eu/Eu∗ close to 0.1 or lower). The contamination of the parental magmas of diogenites by melts derived by partial melting of the eucritic crust can satisfactorily explain the range of the Eu anomalies displayed by diogenites. Thus, these anomalies are the first firm indication that parental melts of diogenites have intruded the eucritic crust, and consequently are younger than eucrites.     

Jurassic plume-origin ophiolites in Japan: accreted fragments of oceanic plateaus

The Mikabu and Sorachi–Yezo belts comprise Jurassic ophiolitic complexes in Japan, where abundant basaltic to picritic rocks occur as lavas and hyaloclastite blocks. In the studied northern Hamamatsu and Dodaira areas of the Mikabu belt, these rocks are divided into two geochemical types, namely depleted (D-) and enriched (E-) types. In addition, highly enriched (HE-) type has been reported from other areas in literature. The D-type picrites contain highly magnesian relic olivine phenocrysts up to Fo_93.5, and their Fo–NiO trend indicates fractional crystallization from a high-MgO primary magma. The MgO content is calculated as high as 25 wt%, indicating mantle melting at unusually high potential temperature (T _p) up to 1,650 °C. The E-type rocks represent the enrichment in Fe and LREE and the depletion in Mg, Al and HREE relative to the D-type rocks. These chemical characteristics are in good accordance with those of melts from garnet pyroxenite melting. Volcanics in the Sorachi–Yezo belts can be divided into the same types as the Mikabu belt, and the D-type picrites with magnesian olivines also show lines of evidence for production from high T _p mantle. Evidence for the high T _p mantle and geochemical similarities with high-Mg picrites and komatiites from oceanic and continental large igneous provinces (LIPs) indicate that the Mikabu and Sorachi–Yezo belts are accreted oceanic LIPs that were formed from hot large mantle plumes in the Late Jurassic Pacific Ocean. The E- and D-type rocks were formed as magmas generated by garnet pyroxenite melting at an early stage of LIP magmatism and by depleted peridotite melting at the later stage, respectively. The Mikabu belt characteristically bears abundant ultramafic cumulates, which could have been formed by crystal accumulation from a primary magma generated from Fe-rich peridotite mantle source, and the HE-type magma were produced by low degrees partial melting of garnet pyroxenite source. They should have been formed later and in lower temperatures than the E- and D-type rocks. The Mikabu and Sorachi Plateaus were formed in a low-latitude region of the Late Jurassic Pacific Ocean possibly near a subduction zone, partially experienced high P/T metamorphism during subduction, and then uplifted in association with (or without, in case of Mikabu) the supra-subduction zone ophiolite. The Mikabu and Sorachi Plateaus may be the Late Jurassic oceanic LIPs that could have been formed in brotherhood with the Shatsky Rise.